接口 Advised

    • 方法概要

      所有方法 实例方法 抽象方法 
      修饰符和类型方法说明
      voidaddAdvice​(int pos, Advice advice)
      Add the given AOP Alliance Advice at the specified position in the advice chain.
      voidaddAdvice​(Advice advice)
      Add the given AOP Alliance advice to the tail of the advice (interceptor) chain.
      voidaddAdvisor​(int pos, Advisor advisor)
      Add an Advisor at the specified position in the chain.
      voidaddAdvisor​(Advisor advisor)
      Add an advisor at the end of the advisor chain.
      Advisor[]getAdvisors()
      Return the advisors applying to this proxy.
      Class<?>[]getProxiedInterfaces()
      Return the interfaces proxied by the AOP proxy.
      TargetSourcegetTargetSource()
      Return the TargetSource used by this Advised object.
      intindexOf​(Advice advice)
      Return the index (from 0) of the given AOP Alliance Advice, or -1 if no such advice is an advice for this proxy.
      intindexOf​(Advisor advisor)
      Return the index (from 0) of the given advisor, or -1 if no such advisor applies to this proxy.
      booleanisExposeProxy()
      Return whether the factory should expose the proxy as a ThreadLocal.
      booleanisFrozen()
      Return whether the Advised configuration is frozen, in which case no advice changes can be made.
      booleanisInterfaceProxied​(Class<?> intf)
      Determine whether the given interface is proxied.
      booleanisPreFiltered()
      Return whether this proxy configuration is pre-filtered so that it only contains applicable advisors (matching this proxy's target class).
      booleanisProxyTargetClass()
      Are we proxying the full target class instead of specified interfaces?
      booleanremoveAdvice​(Advice advice)
      Remove the Advisor containing the given advice.
      voidremoveAdvisor​(int index)
      Remove the advisor at the given index.
      booleanremoveAdvisor​(Advisor advisor)
      Remove the given advisor.
      booleanreplaceAdvisor​(Advisor a, Advisor b)
      Replace the given advisor.
      voidsetExposeProxy​(boolean exposeProxy)
      Set whether the proxy should be exposed by the AOP framework as a ThreadLocal for retrieval via the AopContext class.
      voidsetPreFiltered​(boolean preFiltered)
      Set whether this proxy configuration is pre-filtered so that it only contains applicable advisors (matching this proxy's target class).
      voidsetTargetSource​(TargetSource targetSource)
      Change the TargetSource used by this Advised object.
      StringtoProxyConfigString()
      As toString() will normally be delegated to the target, this returns the equivalent for the AOP proxy.
    • 方法详细资料

      • isFrozen

        boolean isFrozen()
        Return whether the Advised configuration is frozen, in which case no advice changes can be made.
      • isProxyTargetClass

        boolean isProxyTargetClass()
        Are we proxying the full target class instead of specified interfaces?
      • getProxiedInterfaces

        Class<?>[] getProxiedInterfaces()
        Return the interfaces proxied by the AOP proxy.

        Will not include the target class, which may also be proxied.

      • isInterfaceProxied

        boolean isInterfaceProxied​(Class<?> intf)
        Determine whether the given interface is proxied.
        参数:
        intf - the interface to check
      • setTargetSource

        void setTargetSource​(TargetSource targetSource)
        Change the TargetSource used by this Advised object.

        Only works if the configuration isn't frozen.

        参数:
        targetSource - new TargetSource to use
      • setExposeProxy

        void setExposeProxy​(boolean exposeProxy)
        Set whether the proxy should be exposed by the AOP framework as a ThreadLocal for retrieval via the AopContext class.

        It can be necessary to expose the proxy if an advised object needs to invoke a method on itself with advice applied. Otherwise, if an advised object invokes a method on this, no advice will be applied.

        Default is false, for optimal performance.

      • isExposeProxy

        boolean isExposeProxy()
        Return whether the factory should expose the proxy as a ThreadLocal.

        It can be necessary to expose the proxy if an advised object needs to invoke a method on itself with advice applied. Otherwise, if an advised object invokes a method on this, no advice will be applied.

        Getting the proxy is analogous to an EJB calling getEJBObject().

        另请参阅:
        AopContext
      • setPreFiltered

        void setPreFiltered​(boolean preFiltered)
        Set whether this proxy configuration is pre-filtered so that it only contains applicable advisors (matching this proxy's target class).

        Default is "false". Set this to "true" if the advisors have been pre-filtered already, meaning that the ClassFilter check can be skipped when building the actual advisor chain for proxy invocations.

        另请参阅:
        ClassFilter
      • isPreFiltered

        boolean isPreFiltered()
        Return whether this proxy configuration is pre-filtered so that it only contains applicable advisors (matching this proxy's target class).
      • getAdvisors

        Advisor[] getAdvisors()
        Return the advisors applying to this proxy.
        返回:
        a list of Advisors applying to this proxy (never null)
      • addAdvisor

        void addAdvisor​(Advisor advisor)
                 throws AopConfigException
        Add an advisor at the end of the advisor chain.

        The Advisor may be an IntroductionAdvisor, in which new interfaces will be available when a proxy is next obtained from the relevant factory.

        参数:
        advisor - the advisor to add to the end of the chain
        抛出:
        AopConfigException - in case of invalid advice
      • addAdvisor

        void addAdvisor​(int pos,
                        Advisor advisor)
                 throws AopConfigException
        Add an Advisor at the specified position in the chain.
        参数:
        advisor - the advisor to add at the specified position in the chain
        pos - position in chain (0 is head). Must be valid.
        抛出:
        AopConfigException - in case of invalid advice
      • removeAdvisor

        boolean removeAdvisor​(Advisor advisor)
        Remove the given advisor.
        参数:
        advisor - the advisor to remove
        返回:
        true if the advisor was removed; false if the advisor was not found and hence could not be removed
      • indexOf

        int indexOf​(Advisor advisor)
        Return the index (from 0) of the given advisor, or -1 if no such advisor applies to this proxy.

        The return value of this method can be used to index into the advisors array.

        参数:
        advisor - the advisor to search for
        返回:
        index from 0 of this advisor, or -1 if there's no such advisor
      • replaceAdvisor

        boolean replaceAdvisor​(Advisor a,
                               Advisor b)
                        throws AopConfigException
        Replace the given advisor.

        Note: If the advisor is an IntroductionAdvisor and the replacement is not or implements different interfaces, the proxy will need to be re-obtained or the old interfaces won't be supported and the new interface won't be implemented.

        参数:
        a - the advisor to replace
        b - the advisor to replace it with
        返回:
        whether it was replaced. If the advisor wasn't found in the list of advisors, this method returns false and does nothing.
        抛出:
        AopConfigException - in case of invalid advice
      • addAdvice

        void addAdvice​(Advice advice)
                throws AopConfigException
        Add the given AOP Alliance advice to the tail of the advice (interceptor) chain.

        This will be wrapped in a DefaultPointcutAdvisor with a pointcut that always applies, and returned from the getAdvisors() method in this wrapped form.

        Note that the given advice will apply to all invocations on the proxy, even to the toString() method! Use appropriate advice implementations or specify appropriate pointcuts to apply to a narrower set of methods.

        参数:
        advice - the advice to add to the tail of the chain
        抛出:
        AopConfigException - in case of invalid advice
        另请参阅:
        addAdvice(int, Advice), DefaultPointcutAdvisor
      • addAdvice

        void addAdvice​(int pos,
                       Advice advice)
                throws AopConfigException
        Add the given AOP Alliance Advice at the specified position in the advice chain.

        This will be wrapped in a DefaultPointcutAdvisor with a pointcut that always applies, and returned from the getAdvisors() method in this wrapped form.

        Note: The given advice will apply to all invocations on the proxy, even to the toString() method! Use appropriate advice implementations or specify appropriate pointcuts to apply to a narrower set of methods.

        参数:
        pos - index from 0 (head)
        advice - the advice to add at the specified position in the advice chain
        抛出:
        AopConfigException - in case of invalid advice
      • removeAdvice

        boolean removeAdvice​(Advice advice)
        Remove the Advisor containing the given advice.
        参数:
        advice - the advice to remove
        返回:
        true of the advice was found and removed; false if there was no such advice
      • indexOf

        int indexOf​(Advice advice)
        Return the index (from 0) of the given AOP Alliance Advice, or -1 if no such advice is an advice for this proxy.

        The return value of this method can be used to index into the advisors array.

        参数:
        advice - the AOP Alliance advice to search for
        返回:
        index from 0 of this advice, or -1 if there's no such advice
      • toProxyConfigString

        String toProxyConfigString()
        As toString() will normally be delegated to the target, this returns the equivalent for the AOP proxy.
        返回:
        a string description of the proxy configuration