vyos.vyos.vyos_ospf_interfaces – OSPF Interfaces Resource Module.
Note
This plugin is part of the vyos.vyos collection (version 1.1.0).
To install it use: ansible-galaxy collection install vyos.vyos.
To use it in a playbook, specify: vyos.vyos.vyos_ospf_interfaces.
New in version 1.2.0: of vyos.vyos
Synopsis
- This module manages OSPF configuration of interfaces on devices running VYOS.
Note
This module has a corresponding action plugin.
Parameters
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config
list / elements=dictionary
|
A list of OSPF configuration for interfaces.
|
|||||
| address_family
list / elements=dictionary
|
OSPF settings on the interfaces in address-family context.
|
|||||
| afi
string / required
|
|
Address Family Identifier (AFI) for OSPF settings on the interfaces.
|
||||
| authentication
dictionary
|
Authentication settings on the interface.
|
|||||
| md5_key
dictionary
|
md5 parameters.
|
|||||
| key
string
|
md5 key.
|
|||||
| key_id
integer
|
key id.
|
|||||
| plaintext_password
string
|
Plain Text password.
|
|||||
| bandwidth
integer
|
Bandwidth of interface (kilobits/sec)
|
|||||
| cost
integer
|
metric associated with interface.
|
|||||
| dead_interval
integer
|
Time interval to detect a dead router.
|
|||||
| hello_interval
integer
|
Timer interval between transmission of hello packets.
|
|||||
| ifmtu
integer
|
interface MTU.
|
|||||
| instance
string
|
Instance ID.
|
|||||
| mtu_ignore
boolean
|
|
if True, Disable MTU check for Database Description packets.
|
||||
| network
string
|
Interface type.
|
|||||
| passive
boolean
|
|
If True, disables forming adjacency.
|
||||
| priority
integer
|
Interface priority.
|
|||||
| retransmit_interval
integer
|
LSA retransmission interval.
|
|||||
| transmit_delay
integer
|
LSA transmission delay.
|
|||||
| name
string
|
Name/Identifier of the interface.
|
|||||
| running_config
string
|
This option is used only with state parsed.
The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
|
|||||
| state
string
|
|
The state the configuration should be left in.
|
||||
Examples
# Using merged
#
# Before state:
# -------------
#
# @vyos:~$ show configuration commands | match "ospf"
- name: Merge provided configuration with device configuration
vyos.vyos.vyos_ospf_interfaces:
config:
- name: "eth1"
address_family:
- afi: "ipv4"
transmit_delay: 50
priority: 26
network: "point-to-point"
- afi: "ipv6"
dead_interval: 39
- name: "bond2"
address_family:
- afi: "ipv4"
transmit_delay: 45
bandwidth: 70
authentication:
md5_key:
key_id: 10
key: "1111111111232345"
- afi: "ipv6"
passive: True
state: merged
# After State:
# --------------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# "after": [
# "
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "before": [
# {
# "name": "eth0"
# },
# {
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "changed": true,
# "commands": [
# "set interfaces ethernet eth1 ip ospf transmit-delay 50",
# "set interfaces ethernet eth1 ip ospf priority 26",
# "set interfaces ethernet eth1 ip ospf network point-to-point",
# "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
# "set interfaces bonding bond2 ip ospf transmit-delay 45",
# "set interfaces bonding bond2 ip ospf bandwidth 70",
# "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
# "set interfaces bonding bond2 ipv6 ospfv3 passive"
# ],
# Using replaced:
# Before State:
# ------------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
- name: Replace provided configuration with device configuration
vyos.vyos.vyos_ospf_interfaces:
config:
- name: "eth1"
address_family:
- afi: "ipv4"
cost: 100
- afi: "ipv6"
ifmtu: 33
- name: "bond2"
address_family:
- afi: "ipv4"
transmit_delay: 45
- afi: "ipv6"
passive: True
state: replaced
# After State:
# -----------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$
# Module Execution
# ----------------
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 100
# },
# {
# "afi": "ipv6",
# "ifmtu": 33
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "changed": true,
# "commands": [
# "set interfaces ethernet eth1 ip ospf cost 100",
# "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33",
# "delete interfaces ethernet eth1 ip ospf network point-to-point",
# "delete interfaces ethernet eth1 ip ospf priority 26",
# "delete interfaces ethernet eth1 ip ospf transmit-delay 50",
# "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
# "delete interfaces bonding bond2 ip ospf authentication",
# "delete interfaces bonding bond2 ip ospf bandwidth 70"
# ],
#
# Using Overridden:
# -----------------
# Before State:
# ------------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$
- name: Override device configuration with provided configuration
vyos.vyos.vyos_ospf_interfaces:
config:
- name: "eth0"
address_family:
- afi: "ipv4"
cost: 100
- afi: "ipv6"
ifmtu: 33
passive: True
state: overridden
# After State:
# -----------
# 200~vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# vyos@vyos:~$
#
#
# "after": [
# {
# "name": "bond2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 100
# },
# {
# "afi": "ipv6",
# "ifmtu": 33,
# "passive": true
# }
# ],
# "name": "eth0"
# },
# {
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 100,
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39,
# "ifmtu": 33
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "changed": true,
# "commands": [
# "delete interfaces bonding bond2 ip ospf",
# "delete interfaces bonding bond2 ipv6 ospfv3",
# "delete interfaces ethernet eth1 ip ospf",
# "delete interfaces ethernet eth1 ipv6 ospfv3",
# "set interfaces ethernet eth0 ip ospf cost 100",
# "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33",
# "set interfaces ethernet eth0 ipv6 ospfv3 passive"
# ],
#
# Using deleted:
# -------------
# before state:
# -------------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$
- name: Delete device configuration
vyos.vyos.vyos_ospf_interfaces:
config:
- name: "eth0"
state: deleted
# After State:
# -----------
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$
#
#
# "after": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "before": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 100
# },
# {
# "afi": "ipv6",
# "ifmtu": 33,
# "passive": true
# }
# ],
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
# "changed": true,
# "commands": [
# "delete interfaces ethernet eth0 ip ospf",
# "delete interfaces ethernet eth0 ipv6 ospfv3"
# ],
#
# Using parsed:
# parsed.cfg:
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '50'
# set interfaces ethernet eth0 ip ospf priority '26'
# set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
#
- name: parse configs
vyos.vyos.vyos_ospf_interfaces:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# Module Execution:
# ----------------
# "parsed": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 50,
# "priority": 26
# },
# {
# "afi": "ipv6",
# "instance": "33",
# "mtu_ignore": true
# }
# ],
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# }
# ]
# Using rendered:
# --------------
- name: Render
vyos.vyos.vyos_ospf_interfaces:
config:
- name: "eth1"
address_family:
- afi: "ipv4"
transmit_delay: 50
priority: 26
network: "point-to-point"
- afi: "ipv6"
dead_interval: 39
- name: "bond2"
address_family:
- afi: "ipv4"
transmit_delay: 45
bandwidth: 70
authentication:
md5_key:
key_id: 10
key: "1111111111232345"
- afi: "ipv6"
passive: True
state: rendered
# Module Execution:
# ----------------
# "rendered": [
# "set interfaces ethernet eth1 ip ospf transmit-delay 50",
# "set interfaces ethernet eth1 ip ospf priority 26",
# "set interfaces ethernet eth1 ip ospf network point-to-point",
# "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
# "set interfaces bonding bond2 ip ospf transmit-delay 45",
# "set interfaces bonding bond2 ip ospf bandwidth 70",
# "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
# "set interfaces bonding bond2 ipv6 ospfv3 passive"
# ]
#
# Using Gathered:
# --------------
# Native Config:
# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$
- name: gather configs
vyos.vyos.vyos_ospf_interfaces:
state: gathered
# Module Execution:
# -----------------
# "gathered": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "authentication": {
# "md5_key": {
# "key": "1111111111232345",
# "key_id": 10
# }
# },
# "bandwidth": 70,
# "transmit_delay": 45
# },
# {
# "afi": "ipv6",
# "passive": true
# }
# ],
# "name": "bond2"
# },
# {
# "name": "eth0"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "network": "point-to-point",
# "priority": 26,
# "transmit_delay": 50
# },
# {
# "afi": "ipv6",
# "dead_interval": 39
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ],
Authors
- Gomathi Selvi Srinivasan (@GomathiselviS)
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/vyos/vyos/vyos_ospf_interfaces_module.html