cisco.iosxr.iosxr_ospfv3 – ospfv3 resource module

Note

This plugin is part of the cisco.iosxr collection (version 1.2.0).

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ospfv3.

New in version 1.1.0: of cisco.iosxr

Synopsis

This module manages global ospfv3 configuration on devices running Cisco IOS-XR

Note

This module has a corresponding action plugin.

Parameters

Parameter										Choices/Defaults	Comments
config dictionary											A list of ospfv3 process configuration
	processes list / elements=dictionary										A list of ospfv3 instances configuration
		address_family_unicast boolean								Choices: no yes	Enable unicast topology for ipv4 address family
		areas list / elements=dictionary									Configure ospfv3 areas' properties
			area_id string / required								Area ID as IP address or integer
			authentication dictionary								Enable authentication
				disable boolean						Choices: no ← yes	Do not authenticate OSPFv3 packets
				ipsec dictionary							Specify IPSec AH authentication attributes
					algorithim_type string					Choices: md5 sha1	Specify the type of algorithim
					clear_key string						Specify key in cleartext form
					key string						Specify key
					password_key string						Specify key in encrypted form
					spi integer						Specify the Security Parameter Index value
			bfd dictionary								Configure BFD parameters
				fast_detect dictionary							Configure fast detection
					set boolean					Choices: no yes	Enable fast detection only
					strict_mode boolean					Choices: no yes	Hold down neighbor session until BFD session is up
				minimum_interval integer							Hello interval in milli-seconds
				multiplier integer							Detect multiplier
			cost integer								Interface cost
			database_filter dictionary								Filter LSAs during synchronization and flooding
				all_outgoing_lsa boolean						Choices: no yes	Filter all outgoing LSA
			dead_interval integer								Interval after which a neighbor is declared dead
			default_cost integer								Set the summary default-cost of a NSSA/stub area. Stub's advertised external route metric
			demand_circuit boolean							Choices: no yes	Enable/Disable ospfv3 demand circuit
			distrinbute_rib_prefix_list_name string								Filter LSAs during synchronization and flooding
			encryption dictionary								Encrypt and authenticate OSPFv3 packets
				disable boolean						Choices: no ← yes	Do not encrypt OSPFv3 packets
				ipsec dictionary							Specify IPSec ESP encryption and authentication
					esp dictionary						Specify encryption parameters
						aes dictionary					This specify the aes algorithim
							algorithim_type string			Choices: 192 256	Specify the bit encryption for aes algorithim
							clear_key string				Specify AES key in cleartext form
							key string				Cleartext AES key
							password_key string				Specify AES key in encrypted form
						des dictionary					This specify the des algorithim
							clear_key string				Specify AES key in cleartext form
							key string				Cleartext AES key
							password_key string				Specify AES key in encrypted form
						null_encryption dictionary					Specify null encryption attributes
							authentication dictionary				Specify authentication parameters
								algorithim_type string		Choices: md5 sha1	Specify the type of algorithim
								clear_key string			Specify key in cleartext form
								key string			Specify key
								password_key string			Specify key in encrypted form
						triple_des dictionary					This specify the triple DES algorithim
							clear_key string				Specify 3DES key in cleartext form
							key string				Cleartext 3DES key
							password_key string				Specify 3DES key in encrypted form
					spi integer						Specify the Security Parameter Index value
			fast_reroute dictionary								Specify IP Fast Reroute
				disabled boolean						Choices: no yes	Disable IP fast reroute
				per_link dictionary							Specify per-prefix computation
					information_type string					Choices: exclude lfa_candidate	Specify per-link LFA exclusion or FRR LFA candidate information
					interface dictionary						Specify Per-link LFA exclusion information
						bundle_ether list / elements=integer					Specify Aggregated Ethernet interface(s)
						bvi list / elements=integer					Specify Bridge-Group Virtual Interface
						fast_ethernet list / elements=string					Specify FastEthernet/IEEE 802.3 interface(s)
						fiftygige list / elements=string					Specify FiftyGigE/IEEE 802.3 interface(s)
						fortygige list / elements=string					Specify FortyGigE/IEEE 802.3 interface(s)
						fourhundredgige list / elements=string					Specify FourHundredGigE/IEEE 802.3 interface(s)
						gigabitethernet list / elements=string					Specify GigabitEthernet/IEEE 802.3 interface(s)
						hundredgige list / elements=string					Specify HundredGigE/IEEE 802.3 interface(s)
						mgmteth list / elements=string					Specify MgmtEth/IEEE 802.3 interface(s)
						multilink list / elements=string					Specify Multilink network interface(s)
						nve list / elements=integer					Specify Network Virtualization Endpoint Interface(s)
						pos_int list / elements=integer					Specify Aggregated pos interface(s)
						pw_ether list / elements=integer					Specify PWHE Ethernet Interface
						pw_iw list / elements=integer					Specify PWHE VC11 IP Interworking Interface
						serial list / elements=string					Specify Serial network interface(s)
						srp list / elements=string					Specify SRP interface(s)
						tengige list / elements=string					Specify TenGigabitEthernet/IEEE 802.3 interface(s)
						tunnel_ip list / elements=integer					Specify GRE/IPinIP Tunnel Interface(s)
						tunnel_ipsec list / elements=integer					Specify IPSec Tunnel interface(s)
						tunnel_mpls integer					MPLS Transport Protocol Tunnel interface
						tunnel_mte list / elements=integer					Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
						twentyfivegige list / elements=string					Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
						twohundredgige list / elements=string					Specify TwoHundredGigE/IEEE 802.3 interface(s)
					use_candidate_only boolean					Choices: no yes	Enable/Disable backup selection from candidate-list only
				per_prefix dictionary							Specify per-prefix computation
					information_type string					Choices: exclude lfa_candidate	Specify per_prefix LFA exclusion or FRR LFA candidate information
					interface dictionary						Specify Per-link LFA exclusion information
						bundle_ether list / elements=integer					Specify Aggregated Ethernet interface(s)
						bvi list / elements=integer					Specify Bridge-Group Virtual Interface
						fast_ethernet list / elements=string					Specify FastEthernet/IEEE 802.3 interface(s)
						fiftygige list / elements=string					Specify FiftyGigE/IEEE 802.3 interface(s)
						fortygige list / elements=string					Specify FortyGigE/IEEE 802.3 interface(s)
						fourhundredgige list / elements=string					Specify FourHundredGigE/IEEE 802.3 interface(s)
						gigabitethernet list / elements=string					Specify GigabitEthernet/IEEE 802.3 interface(s)
						hundredgige list / elements=string					Specify HundredGigE/IEEE 802.3 interface(s)
						mgmteth list / elements=string					Specify MgmtEth/IEEE 802.3 interface(s)
						multilink list / elements=string					Specify Multilink network interface(s)
						nve list / elements=integer					Specify Network Virtualization Endpoint Interface(s)
						pos_int list / elements=integer					Specify Aggregated pos interface(s)
						pw_ether list / elements=integer					Specify PWHE Ethernet Interface
						pw_iw list / elements=integer					Specify PWHE VC11 IP Interworking Interface
						serial list / elements=string					Specify Serial network interface(s)
						srp list / elements=string					Specify SRP interface(s)
						tengige list / elements=string					Specify TenGigabitEthernet/IEEE 802.3 interface(s)
						tunnel_ip list / elements=integer					Specify GRE/IPinIP Tunnel Interface(s)
						tunnel_ipsec list / elements=integer					Specify IPSec Tunnel interface(s)
						tunnel_mpls integer					MPLS Transport Protocol Tunnel interface
						tunnel_mte list / elements=integer					Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
						twentyfivegige list / elements=string					Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
						twohundredgige list / elements=string					Specify TwoHundredGigE/IEEE 802.3 interface(s)
					use_candidate_only boolean					Choices: no yes	Enable/Disable backup selection from candidate-list only
			flood_reduction boolean							Choices: no yes	Enable/Disable flood reduction
			hello_interval integer								Specify Time between HELLO packets
			instance_id integer								Specify instance ID
			mpls_ldp_sync boolean							Choices: no yes	Enable/Disable MPLS LDP Sync
			mtu_ignore boolean							Choices: no yes	Enable/Disable ignoring of MTU in DBD packets
			network string							Choices: broadcast non-broadcast point-to-multipoint point-to-point	Specify Network type
			nssa dictionary								NSSA settings for the area
				default_information_originate dictionary							Originate default Type 7 LSA
					metric integer						ospfv3 default metric
					metric_type integer						Metric type for default routes
					set boolean					Choices: no yes	Set nssa to default information originate
				no_redistribution boolean						Choices: no yes	Do not send redistributed LSAs into NSSA area
				no_summary boolean						Choices: no yes	Do not send summary LSAs into NSSA area
				set boolean						Choices: no yes	Configure area as NSSA
				translate dictionary							Translate LSA
					type7 dictionary						Translate from Type 7 to Type 5
						always boolean / required				Choices: no yes	Always translate LSAs
			packet_size integer								Specify limit size of OSPFv3 packets
			passive boolean							Choices: no yes	Enable/Disable routing updates on an interface
			prefix_suppression boolean							Choices: no yes	Hide all transit addresses on this interface
			priority integer								Specify Router priority
			ranges list / elements=dictionary								Summarize routes matching address/mask (border routers only)
				address string / required							IP in Prefix format (X:X::X/length)
				advertise boolean						Choices: no yes	Advertise this range (default)
				cost integer							Specify user specified metric for this range
				not_advertise boolean						Choices: no yes	DoNotAdvertise this range
			retransmit_interval integer								Specify Delay between LSA retransmissions
			stub dictionary								Settings for configuring the area as a stub
				no_summary boolean						Choices: no yes	Do not send summary LSA into stub area
				set boolean						Choices: no yes	Configure the area as a stub
			transmit_delay integer								Specify estimated time needed to send link-state update packet
			virtual_link list / elements=dictionary								Define a virtual link
				authentication dictionary							Enable authentication
					disable boolean					Choices: no ← yes	Do not authenticate OSPFv3 packets
					ipsec dictionary						Specify IPSec AH authentication attributes
						algorithim_type string				Choices: md5 sha1	Specify the type of algorithim
						clear_key string					Specify key in cleartext form
						key string					Specify key
						password_key string					Specify key in encrypted form
						spi integer					Specify the Security Parameter Index value
				dead_interval integer							Interval after which a neighbor is declared dead
				encryption dictionary							Encrypt and authenticate OSPFv3 packets
					disable boolean					Choices: no ← yes	Do not encrypt OSPFv3 packets
					ipsec dictionary						Specify IPSec ESP encryption and authentication
						esp dictionary					Specify encryption parameters
							aes dictionary				This specify the aes algorithim
								algorithim_type string		Choices: 192 256	Specify the bit encryption for aes algorithim
								clear_key string			Specify AES key in cleartext form
								key string			Cleartext AES key
								password_key string			Specify AES key in encrypted form
							des dictionary				This specify the des algorithim
								clear_key string			Specify AES key in cleartext form
								key string			Cleartext AES key
								password_key string			Specify AES key in encrypted form
							null_encryption dictionary				Specify null encryption attributes
								authentication dictionary			Specify authentication parameters
									algorithim_type string	Choices: md5 sha1	Specify the type of algorithim
									clear_key string		Specify key in cleartext form
									key string		Specify key
									password_key string		Specify key in encrypted form
							triple_des dictionary				This specify the triple DES algorithim
								clear_key string			Specify 3DES key in cleartext form
								key string			Cleartext 3DES key
								password_key string			Specify 3DES key in encrypted form
						spi integer					Specify the Security Parameter Index value
				hello_interval integer							Time between HELLO packets
				id string / required							Router-ID of virtual link neighbor (A.B.C.D)
				retransmit_interval integer							Delay between LSA retransmissions
				transmit_delay integer							Link state transmit delay
		authentication dictionary									Enable authentication
			disable boolean							Choices: no ← yes	Do not authenticate OSPFv3 packets
			ipsec dictionary								Specify IPSec AH authentication attributes
				algorithim_type string						Choices: md5 sha1	Specify the type of algorithim
				clear_key string							Specify key in cleartext form
				key string							Specify key
				password_key string							Specify key in encrypted form
				spi integer							Specify the Security Parameter Index value
		auto_cost dictionary									Calculate ospfv3 interface cost according to bandwidth
			disable boolean							Choices: no yes	Assign ospfv3 cost based on interface type
			reference_bandwidth integer								Specify reference bandwidth in megabits per sec
		bfd dictionary									Configure BFD parameters
			fast_detect dictionary								Configure fast detection
				set boolean						Choices: no yes	Enable fast detection only
				strict_mode boolean						Choices: no yes	Hold down neighbor session until BFD session is up
			minimum_interval integer								Hello interval in milli-seconds
			multiplier integer								Detect multiplier
		capability dictionary									Enable specific OSPFv3 feature
			type7 dictionary								Specify type7 nssa capability
				prefer boolean						Choices: no yes	Prefer type7 externals over type5
				translate boolean						Choices: no yes	Translate type7 to type5
		cost integer									Specify Interface cost
		database_filter dictionary									Filter LSAs during synchronization and flooding
			all_outgoing_lsa boolean							Choices: no yes	Filter all outgoing LSA
		dead_interval integer									Interval after which a neighbor is declared dead
		default_information_originate dictionary									Control distribution of default information
			always boolean							Choices: no yes	Always advertise default route
			metric integer								ospfv3 default metric
			metric_type integer								ospfv3 metric type for default routes
			route_policy string								Apply route-policy to default-information origination
			set boolean							Choices: no yes	Enable distribution of default route
			tag integer								Set tag for default route
		default_metric integer									Set metric of redistributed routes
		demand_circuit boolean								Choices: no yes	Enable/Disable ospfv3 demand circuit
		distance dictionary									Define an administrative distance
			admin_distance integer								Administrative distance
			ospfv3_distance dictionary								ospfv3 administrative distance
				external integer							Distance for external routes
				inter_area integer							Distance for inter-area routes
				intra_area integer							Distance for intra-area routes
		distribute_list dictionary									Filter prefixes to/from RIB
			prefix_list list / elements=string								Filter prefixes based on an IPv6 prefix-list
				in boolean						Choices: no yes	Filter prefixes installed to RIB
				name string							Specify Prefix-list name
				out boolean						Choices: no yes	Filter prefixes redistributed from RIB
		encryption dictionary									Encrypt and authenticate OSPFv3 packets
			disable boolean							Choices: no ← yes	Do not encrypt OSPFv3 packets
			ipsec dictionary								Specify IPSec ESP encryption and authentication
				esp dictionary							Specify encryption parameters
					aes dictionary						This specify the aes algorithim
						algorithim_type string				Choices: 192 256	Specify the bit encryption for aes algorithim
						clear_key string					Specify AES key in cleartext form
						key string					Cleartext AES key
						password_key string					Specify AES key in encrypted form
					des dictionary						This specify the des algorithim
						clear_key string					Specify AES key in cleartext form
						key string					Cleartext AES key
						password_key string					Specify AES key in encrypted form
					null_encryption dictionary						Specify null encryption attributes
						authentication dictionary					Specify authentication parameters
							algorithim_type string			Choices: md5 sha1	Specify the type of algorithim
							clear_key string				Specify key in cleartext form
							key string				Specify key
							password_key string				Specify key in encrypted form
					triple_des dictionary						This specify the triple DES algorithim
						clear_key string					Specify 3DES key in cleartext form
						key string					Cleartext 3DES key
						password_key string					Specify 3DES key in encrypted form
				spi integer							Specify the Security Parameter Index value
		fast_reroute dictionary									Specify IP Fast Reroute
			disabled boolean							Choices: no yes	Disable IP fast reroute
			per_link dictionary								Specify per-prefix computation
				information_type string						Choices: exclude lfa_candidate	Specify per-link LFA exclusion or FRR LFA candidate information
				interface dictionary							Specify Per-link LFA exclusion information
					bundle_ether list / elements=integer						Specify Aggregated Ethernet interface(s)
					bvi list / elements=integer						Specify Bridge-Group Virtual Interface
					fast_ethernet list / elements=string						Specify FastEthernet/IEEE 802.3 interface(s)
					fiftygige list / elements=string						Specify FiftyGigE/IEEE 802.3 interface(s)
					fortygige list / elements=string						Specify FortyGigE/IEEE 802.3 interface(s)
					fourhundredgige list / elements=string						Specify FourHundredGigE/IEEE 802.3 interface(s)
					gigabitethernet list / elements=string						Specify GigabitEthernet/IEEE 802.3 interface(s)
					hundredgige list / elements=string						Specify HundredGigE/IEEE 802.3 interface(s)
					mgmteth list / elements=string						Specify MgmtEth/IEEE 802.3 interface(s)
					multilink list / elements=string						Specify Multilink network interface(s)
					nve list / elements=integer						Specify Network Virtualization Endpoint Interface(s)
					pos_int list / elements=integer						Specify Aggregated pos interface(s)
					pw_ether list / elements=integer						Specify PWHE Ethernet Interface
					pw_iw list / elements=integer						Specify PWHE VC11 IP Interworking Interface
					serial list / elements=string						Specify Serial network interface(s)
					srp list / elements=string						Specify SRP interface(s)
					tengige list / elements=string						Specify TenGigabitEthernet/IEEE 802.3 interface(s)
					tunnel_ip list / elements=integer						Specify GRE/IPinIP Tunnel Interface(s)
					tunnel_ipsec list / elements=integer						Specify IPSec Tunnel interface(s)
					tunnel_mpls integer						MPLS Transport Protocol Tunnel interface
					tunnel_mte list / elements=integer						Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
					twentyfivegige list / elements=string						Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
					twohundredgige list / elements=string						Specify TwoHundredGigE/IEEE 802.3 interface(s)
				use_candidate_only boolean						Choices: no yes	Enable/Disable backup selection from candidate-list only
			per_prefix dictionary								Specify per-prefix computation
				information_type string						Choices: exclude lfa_candidate	Specify per_prefix LFA exclusion or FRR LFA candidate information
				interface dictionary							Specify Per-link LFA exclusion information
					bundle_ether list / elements=integer						Specify Aggregated Ethernet interface(s)
					bvi list / elements=integer						Specify Bridge-Group Virtual Interface
					fast_ethernet list / elements=string						Specify FastEthernet/IEEE 802.3 interface(s)
					fiftygige list / elements=string						Specify FiftyGigE/IEEE 802.3 interface(s)
					fortygige list / elements=string						Specify FortyGigE/IEEE 802.3 interface(s)
					fourhundredgige list / elements=string						Specify FourHundredGigE/IEEE 802.3 interface(s)
					gigabitethernet list / elements=string						Specify GigabitEthernet/IEEE 802.3 interface(s)
					hundredgige list / elements=string						Specify HundredGigE/IEEE 802.3 interface(s)
					mgmteth list / elements=string						Specify MgmtEth/IEEE 802.3 interface(s)
					multilink list / elements=string						Specify Multilink network interface(s)
					nve list / elements=integer						Specify Network Virtualization Endpoint Interface(s)
					post_int list / elements=integer						Specify Aggregated pos interface(s)
					pw_ether list / elements=integer						Specify PWHE Ethernet Interface
					pw_iw list / elements=integer						Specify PWHE VC11 IP Interworking Interface
					serial list / elements=string						Specify Serial network interface(s)
					srp list / elements=string						Specify SRP interface(s)
					tengige list / elements=string						Specify TenGigabitEthernet/IEEE 802.3 interface(s)
					tunnel_ip list / elements=integer						Specify GRE/IPinIP Tunnel Interface(s)
					tunnel_ipsec list / elements=integer						Specify IPSec Tunnel interface(s)
					tunnel_mpls integer						MPLS Transport Protocol Tunnel interface
					tunnel_mte list / elements=integer						Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
					twentyfivegige list / elements=string						Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
					twohundredgige list / elements=string						Specify TwoHundredGigE/IEEE 802.3 interface(s)
				use_candidate_only boolean						Choices: no yes	Enable/Disable backup selection from candidate-list only
		flood_reduction boolean								Choices: no yes	Enable/Disable flood reduction
		graceful_restart dictionary									Enable Graceful-Restart
			helper_disable boolean							Choices: no yes	Disable router's helper support level
			max_interval integer								Maximum route lifetime following restart
			min_interval integer								Minimum interval between Graceful Restarts
			set boolean							Choices: no yes	Set graceful restart
		hello_interval integer									Specify Time between HELLO packets
		ignore_mospf_type6_lsa boolean								Choices: no yes	Ignore MOSPF Type 6 LSA
		instance_id integer									Specify instance ID
		log_adjacency_changes dictionary									Log adjacency state changes
			detail boolean							Choices: no yes	Log all state changes
			disable boolean							Choices: no yes	Disable log adjacency changes
			set boolean							Choices: no yes	Set log adjacency
		maximum dictionary									Set OSPFv3 limits
			interfaces integer								Specify limit for number of interfaces
			paths integer								Specify limit for number of paths
			redistributed_prefixes integer								Specify limit for number of redistributed prefixes
		mpls_ldp_sync boolean								Choices: no yes	Enable/Disable MPLS LDP Sync
		mtu_ignore boolean								Choices: no yes	Enable/Disable ignoring of MTU in DBD packets
		network string								Choices: broadcast non-broadcast point-to-multipoint point-to-point	Specify Network type
		nsr boolean								Choices: no yes	Enable/Disable NSR for all VRFs in this process
		packet_size integer									Specify limit size of OSPFv3 packets
		passive boolean								Choices: no yes	Enable/Disable routing updates on an interface
		prefix_suppression boolean								Choices: no yes	Hide all transit addresses on this interface
		priority integer									Specify Router priority
		process_id string / required									The OSPFv3 Process ID
		protocol_shutdown boolean								Choices: no yes	Gracefully shutdown the OSPFv3 protocol
		redistribute dictionary									Redistribute information from another routing Protocol
			application list / elements=dictionary								Specify application routes
				id string / required							OnePK Application name
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set application route
				tag integer							Set tag for routes redistributed into OSPFv3
			bgp list / elements=dictionary								Specify bgp routes
				id integer / required							BGP process name
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				preserved_med string							Specify preserve med of BGP routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set bgp route number
				tag integer							Set tag for routes redistributed into OSPFv3
			connected dictionary								Specify connected routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set connected route
				tag integer							Set tag for routes redistributed into OSPFv3
			eigrp list / elements=dictionary								Specify eigrp routes
				id integer / required							EIGRP process name
				match string						Choices: external internal	Redistribution of EIGRP routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set bgp route number
				tag integer							Set tag for routes redistributed into OSPFv3
			isis list / elements=dictionary								Specify IS-IS routes
				id string / required							IS-IS name
				level string						Choices: level-1 level-1-2 level-2	Specify IS-IS level routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set IS-IS route number
				tag integer							Set tag for routes redistributed into OSPFv3
			mobile dictionary								Specify mobile routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set mobile route number
				tag integer							Set tag for routes redistributed into OSPFv3
			ospfv3 list / elements=dictionary								Specify ospfv3 routes
				id string / required							OSPFv3 process name
				match dictionary							Redistribution of OSPFv3 routes
					external integer					Choices: 1 2	Redistribute OSPFv3 external routes
					internal boolean					Choices: no yes	Redistribute OSPFv3 internal routes
					nssa_external integer					Choices: 1 2	Redistribute NSSA OSPFv3 external routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set ospfv3 route number
				tag integer							Set tag for routes redistributed into OSPFv3
			static dictionary								Specify static routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set static route
				tag integer							Set tag for routes redistributed into OSPFv3
			subscriber dictionary								Specify subscriber routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set static route
				tag integer							Set tag for routes redistributed into OSPFv3
		retransmit_interval integer									Delay between LSA retransmissions
		router_id string									ospfv3 router-id in IPv4 address format (A.B.C.D)
		spf_prefix_priority dictionary									Specify SPF configuration
			disable boolean							Choices: no yes	Disable SPF prefix priority
			route_policy list / elements=dictionary								Specify the route-policy to prioritize route install
				name string							Specify name of the policy
				value string							Specify parameter values for the policy ()
		stub_router dictionary									Enter stub router configuration submode
			router_lsa dictionary								Modify self originated router LSAs
				advertise_with string						Choices: max-metric r-bit v6-bit	Advertise LSAs with specified type
				always boolean						Choices: no yes	Force ospfv3 stub router mode unconditionally
				external_lsa dictionary							Override External LSA metric in stub router mode
					metric integer						Metric to use while in stub router mode
					set boolean					Choices: no yes	Set external lsa
				include_stub boolean						Choices: no yes	Set maximum metric for stub links in stub router mode
				on_proc_migration integer							Enter stub router mode on ospfv3 process migration
				on_proc_restart integer							Enter stub router mode on ospfv3 process restart
				on_startup dictionary							Enter stub router mode on startup
					time integer						Time in seconds to stay in stub router mode
					wait_for_bgp boolean					Choices: no yes	Exit stub router mode when BGP converges
				on_switchover integer							Enter stub router mode on RP switchover
				summary_lsa dictionary							Override Summary LSA metric in stub router mode
					metric integer						Metric to use while in stub router mode
					set boolean					Choices: no yes	Enable summary LSA
		summary_prefix list / elements=dictionary									Configure IP address summaries
			not_advertise boolean							Choices: no yes	Suppress routes that match the specified prefix/mask pair
			prefix string / required								IP summary address/mask (A.B.C.D/prefix)
			tag integer								Set tag
		timers dictionary									Adjust routing timers
			lsa_arrival integer								Specify LSA arrival timers
			pacing dictionary								Specify pacing timers
				flood integer							Flood pacing timer
				lsa_group integer							LSA group pacing timer
				retransmission integer							LSA group pacing timer
			throttle dictionary								Adjust throttle timers
				lsa dictionary							Specify LSA throttle timers
					all_lsa_initial integer						Delay to generate first occurrence of LSA in milliseconds
					all_lsa_minimum integer						Minimum delay between originating the same LSA in milliseconds
				spf dictionary							Specify SPF throttle timers
					spf_initial integer						Delay to generate first occurrence of SPF in ms
					spf_minimum integer						Minimum delay between originating the same SPF in ms
		trace dictionary									Specify OSPF tracing options
			size string								Delete existing buffer and create one with N entries
			value integer								Specify trace entry
		transmit_delay integer									Estimated time needed to send link-state update packet
running_config string											This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config router ospfv3. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string										Choices: merged ← replaced overridden deleted gathered rendered parsed	The state the configuration should be left in

Notes

Note

Tested against IOS-XR 6.1.3
This module works with connection network_cli. See the IOS-XR Platform Options

Examples

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# Thu Jun 11 15:54:44.569 UTC
# % No such configuration item(s)
#

- name: Merge provided OSPFv3 configuration with the existing configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#    ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# ------------
# After state
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !



# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Replace OSPFv3 routes configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
            - area_id: 20
              cost: 2
              default_cost: 2
        - process_id: 26
          authentication:
            disable: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 27",
#         "area 20 default-cost 2",
#         "area 20 cost 2"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#do show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !


- name: Override existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
            - area_id: 20
              cost: 2
              default_cost: 2
              authentication:
                disable: true
        - process_id: 26
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 10",
#         "no area 11 default-cost 5",
#         "no area 11 cost 11",
#         "no area 22 default-cost 6",
#         "router ospfv3 30",
#         "no cost 2",
#         "no priority 1",
#         "no default-metric 10",
#         "no router-id 2.2.2.2",
#         "no demand-circuit",
#         "no packet-size 577",
#         "no transmit-delay 2",
#         "no dead-interval 2",
#         "no hello-interval 1",
#         "no retransmit-interval 2",
#         "no mtu-ignore",
#         "no area 11 default-cost 5",
#         "no area 22 default-cost 6",
#         "router ospfv3 26",
#         "area 10 hello-interval 4"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !



# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !

- name: Deleted existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
      - process_id: '10'
      - process_id: '26'
      - process_id: '27'
      - process_id: '30'
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     },
#
#  "commands": [
#         "router ospfv3 26",
#         "no authentication disable",
#         "no area 10 hello-interval 4",
#         "router ospfv3 27",
#         "no area 10 hello-interval 2",
#         "no area 20 default-cost 2",
#         "no area 20 cost 2"
#     ]
#
#  "after": {
#        "processes": [
#            {
#                "process_id": "10"
#            },
#            {
#                "process_id": "26"
#            },
#            {
#                "process_id": "27"
#            },
#            {
#                "process_id": "30"
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospfv3
# router ospfv3 10
# !
# router ospfv3 26
# !
# router ospfv3 27
# !
# router ospfv3 30
# !


# Using parsed
# parsed.cfg
# ------------
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  router-id 2.2.2.2
#  cost 2
#  packet-size 577
#  priority 1
#  mtu-ignore
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospfv3:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#     ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Gather ospfv3 routes configuration
  cisco.iosxr.iosxr_ospfv3:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#

Authors

Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/cisco/iosxr/iosxr_ospfv3_module.html

Docs

Docs4dev

Title here

cisco.iosxr.iosxr_ospfv3 – ospfv3 resource module

Synopsis

Parameters

Notes

Examples

Authors