Docs4dev
Docs
ansible / 2.10 / collections / netapp / ontap / na_ontap_ntfs_sd_module.html

netapp.ontap.na_ontap_ntfs_sd – NetApp ONTAP create, delete or modify NTFS security descriptor

Note

This plugin is part of the netapp.ontap collection (version 20.12.0).

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_ntfs_sd.

New in version 20.4.0: of netapp.ontap

Synopsis

  • Create, modify or destroy NTFS security descriptor

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.
  • REST support requires ONTAP 9.6 or later.
  • Ansible 2.6
  • Ansible 2.9 or later is strongly recommended as it enables the new collection delivery system.
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
control_flags_raw
integer
Specifies the security descriptor control flags.
1... .... .... .... = Self Relative
.0.. .... .... .... = RM Control Valid
..0. .... .... .... = SACL Protected
...0 .... .... .... = DACL Protected
.... 0... .... .... = SACL Inherited
.... .0.. .... .... = DACL Inherited
.... ..0. .... .... = SACL Inherit Required
.... ...0 .... .... = DACL Inherit Required
.... .... ..0. .... = SACL Defaulted
.... .... ...0 .... = SACL Present
.... .... .... 0... = DACL Defaulted
.... .... .... .1.. = DACL Present
.... .... .... ..0. = Group Defaulted
.... .... .... ...0 = Owner Defaulted
At present only the following flags are honored. Others are ignored.
..0. .... .... .... = SACL Protected
...0 .... .... .... = DACL Protected
.... .... ..0. .... = SACL Defaulted
.... .... .... 0... = DACL Defaulted
.... .... .... ..0. = Group Defaulted
.... .... .... ...0 = Owner Defaulted
Convert the 16 bit binary flags and convert to decimal for the input.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
group
string
Specifies the group's SID or domain account of the NTFS security descriptor.
Need to provide the full path of the group.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
name
string / required
Specifies the NTFS security descriptor name. Not modifiable.
ontapi
integer
The ontap api version to use
owner
string
Specifies the owner's SID or domain account of the NTFS security descriptor.
Need to provide the full path of the owner.
password
string
Password for the specified user.

aliases: pass
state
string
    Choices:
  • present ←
  • absent
Whether the specified NTFS security descriptor should exist or not.
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
Specifies the vserver for the NTFS security descriptor.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Create NTFS Security Descriptor
  na_ontap_ntfs_sd:
    state: present
    vserver: SVM1
    name: ansible_sd
    owner: DOMAIN\Account
    group: DOMAIN\Group
    control_flags_raw: 0
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

- name: Modify NTFS Security Descriptor
  na_ontap_ntfs_sd:
    state: present
    vserver: SVM1
    name: ansible_sd
    owner: DOMAIN\Account
    group: DOMAIN\Group
    control_flags_raw: 0
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

- name: Delete NTFS Security Descriptor
  na_ontap_ntfs_sd:
    state: absent
    vserver: SVM1
    name: ansible_sd
    hostname: "{{ hostname }}"
    username: "{{ username }}"
    password: "{{ password }}"

Authors

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/netapp/ontap/na_ontap_ntfs_sd_module.html