arista.eos.eos_bgp_address_family – Manages BGP address family resource module
Note
This plugin is part of the arista.eos collection (version 1.3.0).
To install it use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_bgp_address_family.
New in version 1.4.0: of arista.eos
Synopsis
- This module configures and manages the attributes of BGP AF on Arista EOS platforms.
Note
This module has a corresponding action plugin.
Parameters
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config
dictionary
|
Configurations for BGP address family.
|
|||||
| address_family
list / elements=dictionary
|
Enable address family and enter its config mode
|
|||||
| afi
string
|
|
address family.
|
||||
| bgp_params
dictionary
|
BGP parameters.
|
|||||
| additional_paths
string
|
|
BGP additional-paths commands
|
||||
| next_hop_address_family
string
|
|
Next-hop address-family configuration
|
||||
| next_hop_unchanged
boolean
|
|
Preserve original nexthop while advertising routes to eBGP peers.
|
||||
| redistribute_internal
boolean
|
|
Redistribute internal BGP routes.
|
||||
| route
string
|
Configure route-map for route installation.
|
|||||
| graceful_restart
boolean
|
|
Enable graceful restart mode.
|
||||
| neighbor
list / elements=dictionary
|
Configure routing for a network.
|
|||||
| activate
boolean
|
|
Activate neighbor in the address family.
|
||||
| additional_paths
string
|
|
BGP additional-paths commands.
|
||||
| default_originate
dictionary
|
Originate default route to this neighbor.
|
|||||
| always
boolean
|
|
Always originate default route to this neighbor.
|
||||
| route_map
string
|
Route map reference.
|
|||||
| encapsulation
dictionary
|
Default transport encapsulation for neighbor. Applicable for evpn address-family.
|
|||||
| source_interface
string
|
Source interface to update BGP next hop address. Applicable for mpls transport.
|
|||||
| transport
string
|
|
MPLS/VXLAN transport.
|
||||
| graceful_restart
boolean
|
|
Enable graceful restart mode.
|
||||
| next_hop_address_family
string
|
|
Next-hop address-family configuration
|
||||
| next_hop_unchanged
boolean
|
|
Preserve original nexthop while advertising routes to eBGP peers.
|
||||
| peer
string
|
Neighbor address/ peer-group name.
|
|||||
| prefix_list
dictionary
|
Prefix list reference.
|
|||||
| direction
string
|
|
Configure an inbound/outbound prefix-list.
|
||||
| name
string
|
prefix list name.
|
|||||
| route_map
dictionary
|
Route map reference.
|
|||||
| direction
string
|
|
Configure an inbound/outbound route-map.
|
||||
| name
string
|
Route map name.
|
|||||
| weight
integer
|
Weight to assign.
|
|||||
| network
list / elements=dictionary
|
configure routing for network.
|
|||||
| address
string
|
network address.
|
|||||
| route_map
string
|
Route map reference.
|
|||||
| redistribute
list / elements=dictionary
|
Redistribute routes in to BGP.
|
|||||
| isis_level
string
|
|
Applicable for isis routes. Specify isis route level.
|
||||
| ospf_route
string
|
|
ospf route options.
|
||||
| protocol
string
|
|
Routes to be redistributed.
|
||||
| route_map
string
|
Route map reference.
|
|||||
| route_target
dictionary
|
Route target
|
|||||
| mode
string
|
|
route import or route export.
|
||||
| target
string
|
route target
|
|||||
| safi
string
|
|
Address family type for ipv4.
|
||||
| vrf
string
|
name of the VRF in which BGP will be configured.
|
|||||
| as_number
string
|
Autonomous system number.
|
|||||
| running_config
string
|
This option is used only with state parsed.
The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
|
|||||
| state
string
|
|
The state the configuration should be left in.
|
||||
Notes
Note
- Tested against Arista EOS 4.23.0F
- This module works with connection
network_cli. See the EOS Platform Options.
Examples
# Using merged
# Before state
# veos(config)#show running-config | section bgp
# veos(config)#
- name: Merge provided configuration with device configuration
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: merged
# After state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
# Module Execution:
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {},
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ],
# Using replaced:
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 activate
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# veos(config-router-bgp)#
#
- name: Replace
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
state: replaced
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "activate": true,
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv6",
# "redistribute ospf3 match external",
# "no redistribute isis level-2",
# "no route-target export 33:11",
# "exit",
# "exit",
# "address-family ipv6",
# "redistribute isis level-2",
# "no neighbor peer2 activate",
# "no bgp additional-paths receive",
# "exit"
# ],
# Using overridden (overriding af at global context):
# Before state:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# neighbor peer2 default-originate always
# redistribute isis level-2
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "neighbor": [
# {
# "activate": true,
# "peer": "1.1.1.1"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "address-family ipv4",
# "no redistribute ospf3 match external",
# "no network 1.1.1.0/24",
# "no network 1.5.1.0/24 route-map MAP01",
# "neighbor peer2 default-originate always",
# "no neighbor 1.1.1.1 activate",
# "bgp additional-paths receive",
# "exit",
# "no address-family ipv6"
# ],
# using Overridden (overridding af in vrf context):
# Before State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv6
# route-target export 33:11
# redistribute isis level-2
# redistribute ospf3 match external
# veos(config-router-bgp)#
- name: Overridden
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
vrf: vrft
state: overridden
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# },
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "route_target": {
# "mode": "export",
# "target": "33:11"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "changed": true,
# "commands": [
# "router bgp 10",
# "vrf vrft",
# "address-family ipv4",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "exit",
# " vrf vrft",
# "no address-family ipv6"
# ],
# Using Deleted:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# address-family ipv6
# bgp additional-paths receive
# neighbor peer2 default-originate always
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: Delete
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv6"
vrf: "vrft"
- afi: "ipv6"
state: deleted
# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# "before": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# Using parsed:
# parsed_bgp_address_family.cfg :
# router bgp 10
# neighbor n2 peer-group
# neighbor n2 next-hop-unchanged
# neighbor n2 maximum-routes 12000
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# redistribute ospf3 match external
# !
# address-family ipv6
# no bgp additional-paths receive
# neighbor n2 next-hop-unchanged
# redistribute isis level-2
# !
# vrf bgp_10
# ip access-group acl01
# ucmp fec threshold trigger 33 clear 22 warning-only
# !
# address-family ipv4
# route-target import 20:11
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# !
# address-family ipv6
# redistribute ospf3 match external
- name: parse configs
arista.eos.eos_bgp_address_family:
running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
state: parsed
# Module Execution:
# "parsed": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv6",
# "neighbor": [
# {
# "next_hop_unchanged": true,
# "peer": "n2"
# }
# ],
# "redistribute": [
# {
# "isis_level": "level-2",
# "protocol": "isis"
# }
# ]
# },
# {
# "afi": "ipv4",
# "route_target": {
# "mode": "import",
# "target": "20:11"
# },
# "vrf": "bgp_10"
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# },
# {
# "afi": "ipv6",
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ],
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# }
# }
# Using gathered:
# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
# neighbor peer2 peer-group
# neighbor peer2 maximum-routes 12000
# neighbor 1.1.1.1 maximum-routes 12000
# !
# address-family ipv4
# bgp additional-paths receive
# neighbor peer2 default-originate always
# no neighbor 1.1.1.1 activate
# network 1.1.1.0/24
# network 1.5.1.0/24 route-map MAP01
# redistribute ospf3 match external
# !
# vrf vrft
# address-family ipv4
# bgp additional-paths receive
# veos(config-router-bgp)#
- name: gather configs
arista.eos.eos_bgp_address_family:
state: gathered
# Module Execution:
# "gathered": {
# "address_family": [
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "neighbor": [
# {
# "default_originate": {
# "always": true
# },
# "peer": "peer2"
# }
# ],
# "network": [
# {
# "address": "1.1.1.0/24"
# },
# {
# "address": "1.5.1.0/24",
# "route_map": "MAP01"
# }
# ],
# "redistribute": [
# {
# "ospf_route": "external",
# "protocol": "ospf3"
# }
# ]
# },
# {
# "afi": "ipv4",
# "bgp_params": {
# "additional_paths": "receive"
# },
# "vrf": "vrft"
# }
# ],
# "as_number": "10"
# },
# using rendered:
- name: Render
arista.eos.eos_bgp_address_family:
config:
as_number: "10"
address_family:
- afi: "ipv4"
redistribute:
- protocol: "ospf3"
ospf_route: "external"
network:
- address: "1.1.1.0/24"
- address: "1.5.1.0/24"
route_map: "MAP01"
- afi: "ipv6"
bgp_params:
additional_paths: "receive"
neighbor:
- peer: "peer2"
default_originate:
always: True
- afi: "ipv6"
redistribute:
- protocol: "isis"
isis_level: "level-2"
route_target:
mode: "export"
target: "33:11"
vrf: "vrft"
state: rendered
# Module Execution:
# "rendered": [
# "router bgp 10",
# "address-family ipv4",
# "redistribute ospf3 match external",
# "network 1.1.1.0/24",
# "network 1.5.1.0/24 route-map MAP01",
# "exit",
# "address-family ipv6",
# "neighbor peer2 default-originate always",
# "bgp additional-paths receive",
# "exit",
# "vrf vrft",
# "address-family ipv6",
# "redistribute isis level-2",
# "route-target export 33:11",
# "exit",
# "exit"
# ]
#
Authors
- Gomathi Selvi Srinivasan (@GomathiselviS)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/arista/eos/eos_bgp_address_family_module.html