ce_interface_ospf - Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

New in version 2.4.

Synopsis

Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Options

parameter	required	default	choices	comments
area	yes			Ospf area associated with this ospf process. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295.
auth_key_id	no			Authentication key id when `auth_mode` is 'hmac-sha256', 'md5' or 'hmac-md5. Valid value is an integer is in the range from 1 to 255.
auth_mode	no		none null hmac-sha256 md5 hmac-md5 simple	Specifies the authentication type.
auth_text_md5	no			Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
auth_text_simple	no			Specifies a password for simple authentication. The value is a string of 1 to 8 characters.
cost	no			The cost associated with this interface. Valid values are an integer in the range from 1 to 65535.
dead_interval	no			Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer in the range from 1 to 235926000.
hello_interval	no			Time between sending successive hello packets. Valid values are an integer in the range from 1 to 65535.
interface	yes			Full name of interface, i.e. 40GE1/0/10.
process_id	yes			Specifies a process ID. The value is an integer ranging from 1 to 4294967295.
silent_interface	no			Setting to true will prevent this interface from receiving HELLO packets. Valid values are 'true' and 'false'.
state	no	present	present absent	Determines whether the config should be present or not on the device.

Examples

- name: eth_trunk module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Enables OSPF and sets the cost on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      cost: 100
      provider: '{{ cli }}'

  - name: Sets the dead interval of the OSPF neighbor
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      dead_interval: 100
      provider: '{{ cli }}'

  - name: Sets the interval for sending Hello packets on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      hello_interval: 2
      provider: '{{ cli }}'

  - name: Disables an interface from receiving and sending OSPF packets
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      silent_interface: true
      provider: '{{ cli }}'

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name	description	returned	type	sample
changed	check to see if a change was made on the device	always	boolean	True
end_state	k/v pairs of configuration after module execution	verbose mode	dict	{'cost': '100', 'area': '0.0.0.100', 'silent_interface': 'false', 'auth_mode': 'none', 'dead_interval': '40', 'process_id': '6', 'hello_interval': '10', 'interface': '10GE1/0/30'}
existing	k/v pairs of existing configuration	verbose mode	dict	{'process_id': '1', 'area': '0.0.0.100'}
proposed	k/v pairs of parameters passed into module	verbose mode	dict	{'interface': '10GE1/0/30', 'process_id': '1', 'cost': '100', 'area': '0.0.0.100'}
updates	commands sent to the device	always	list	['interface 10GE1/0/30', 'ospf enable 1 area 0.0.0.100', 'ospf cost 100']

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.4/ce_interface_ospf_module.html

Docs

Docs4dev

Title here