interfaces_file - Tweak settings in /etc/network/interfaces files
New in version 2.4.
Synopsis
- Manage (add, remove, change) individual interface options in an interfaces-style file without having to manage the file as a whole with, say, template or assemble. Interface has to be presented in a file.
- Read information about interfaces from interfaces-styled files
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
attributes
(added in 2.3)
|
Default:
None
|
Attributes the file or directory should have. To get supported flags look at the man page for
chattr on the target system. This string should contain the attributes in the same order as the one displayed by
lsattr.
aliases: attr |
backup |
|
Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly.
|
dest | Default:
/etc/network/interfaces
|
Path to the interfaces file
|
group | Default:
None
|
Name of the group that should own the file/directory, as would be fed to
chown.
|
iface | Default:
None
|
Name of the interface, required for value changes or option remove
|
mode | Default:
None
|
Mode the file or directory should be. For those used to
/usr/bin/chmod remember that modes are actually octal numbers (like
0644 or
01777 ). Leaving off the leading zero will likely have unexpected results. As of version 1.8, the mode may be specified as a symbolic mode (for example,
u+rwx or
u=rw,g=r,o=r ).
|
option | Default:
None
|
Name of the option, required for value changes or option remove
|
owner | Default:
None
|
Name of the user that should own the file/directory, as would be fed to
chown.
|
selevel | Default:
s0
|
Level part of the SELinux file context. This is the MLS/MCS attribute, sometimes known as the
range .
_default feature works as for
seuser.
|
serole | Default:
None
|
Role part of SELinux file context,
_default feature works as for
seuser.
|
setype | Default:
None
|
Type part of SELinux file context,
_default feature works as for
seuser.
|
seuser | Default:
None
|
User part of SELinux file context. Will default to system policy, if applicable. If set to
_default , it will use the
user portion of the policy if available.
|
state |
|
If set to
absent the option or section will be removed if present instead of created.
|
unsafe_writes
(added in 2.2)
|
|
Normally this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, sometimes systems are configured or just broken in ways that prevent this. One example are docker mounted files, they cannot be updated atomically and can only be done in an unsafe manner.
This boolean option allows ansible to fall back to unsafe methods of updating files for those cases in which you do not have any other choice. Be aware that this is subject to race conditions and can lead to data corruption.
|
value | Default:
None
|
If
option is not presented for the
interface and
state is
present option will be added. If
option already exists and is not
pre-up ,
up ,
post-up or
down , it's value will be updated.
pre-up ,
up ,
post-up and
down options can't be updated, only adding new options, removing existing ones or cleaning the whole option set are supported
|
Notes
Note
- If option is defined multiple times last one will be updated but all will be deleted in case of an absent state
Examples
# Set eth1 mtu configuration value to 8000 - interfaces_file: dest: /etc/network/interfaces.d/eth1.cfg iface: eth1 option: mtu value: 8000 backup: yes state: present register: eth1_cfg
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description | |||
---|---|---|---|---|---|
dest
string
|
success |
destination file/path
Sample:
/etc/network/interfaces
|
|||
ifaces
complex
|
success |
interfaces dictionary
|
|||
ifaces
dictionary
|
success |
interface dictionary
|
|||
eth0
dictionary
|
success |
Name of the interface
|
|||
down
list
|
success |
list of
down scripts
Sample:
['route del -net 10.10.10.0/24 gw 10.10.10.1 dev eth1', 'route del -net 10.10.11.0/24 gw 10.10.11.1 dev eth2']
|
|||
method
string
|
success |
interface method
Sample:
manual
|
|||
address_family
string
|
success |
interface address family
Sample:
inet
|
|||
post-up
list
|
success |
list of
post-up scripts
Sample:
['route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1', 'route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2']
|
|||
pre-up
list
|
success |
list of
pre-up scripts
Sample:
['route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1', 'route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2']
|
|||
up
list
|
success |
list of
up scripts
Sample:
['route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1', 'route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2']
|
|||
mtu
string
|
success |
other options, all values returned as strings
Sample:
1500
|
Status
This module is flagged as stableinterface which means that the maintainers for this module guarantee that no backward incompatible interface changes will be made.
Author
- Roman Belyakovsky (@hryamzik)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/interfaces_file_module.html