pn_vrouterbgp - CLI command to add/remove/modify vrouter-bgp.
New in version 2.2.
Synopsis
- Execute vrouter-bgp-add, vrouter-bgp-remove, vrouter-bgp-modify command.
- Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements Layer 4 protocols.
Parameters
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| pn_bfd |
Specify if you want BFD protocol support for fault detection.
|
|
| pn_clipassword |
Provide login password if user is not root.
|
|
| pn_cliswitch |
Target switch(es) to run the cli on.
|
|
| pn_cliusername |
Provide login username if user is not root.
|
|
| pn_default_originate |
Specify if you want announce default routes to the neighbor or not.
|
|
| pn_ebgp |
Specify a value for external BGP to accept or attempt BGP connections to external peers, not directly connected, on the network. This is a value between 1 and 255.
|
|
| pn_holdtime |
Specify BGP neighbor holdtime in seconds.
|
|
| pn_keepalive |
Specify BGP neighbor keepalive interval in seconds.
|
|
| pn_max_prefix |
Specify the maximum number of prefixes.
|
|
| pn_max_prefix_warn |
Specify if you want a warning message when the maximum number of prefixes is exceeded.
|
|
| pn_multiprotocol |
|
Specify a multi-protocol for BGP.
|
| pn_neighbor |
Specify a neighbor IP address to use for BGP.
Required for vrouter-bgp-add.
|
|
| pn_next_hop_self |
Specify if the next-hop is the same router or not.
|
|
| pn_override_capability |
Specify if you want to override capability.
|
|
| pn_password |
Specify a password, if desired.
|
|
| pn_prefix_listin |
Specify the prefix list to filter traffic inbound.
|
|
| pn_prefix_listout |
Specify the prefix list to filter traffic outbound.
|
|
| pn_remote_as |
Specify the remote Autonomous System(AS) number. This value is between 1 and 4294967295.
Required for vrouter-bgp-add.
|
|
| pn_route_mapin |
Specify inbound route map for neighbor.
|
|
| pn_route_mapout |
Specify outbound route map for neighbor.
|
|
| pn_route_reflector |
Specify if a route reflector client is used.
|
|
| pn_soft_reconfig |
Specify if you want a soft reconfiguration of inbound traffic.
|
|
| pn_vrouter_name
required
|
Specify a name for the vRouter service.
|
|
| pn_weight |
Specify a default weight value between 0 and 65535 for the neighbor routes.
|
|
| state
required
|
|
State the action to perform. Use 'present' to add bgp, 'absent' to remove bgp and 'update' to modify bgp.
|
Examples
- name: add vrouter-bgp
pn_vrouterbgp:
state: 'present'
pn_vrouter_name: 'ansible-vrouter'
pn_neighbor: 104.104.104.1
pn_remote_as: 1800
- name: remove vrouter-bgp
pn_vrouterbgp:
state: 'absent'
pn_name: 'ansible-vrouter'
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| changed
bool
|
always |
Indicates whether the CLI caused changes on the target.
|
| command
str
|
always |
The CLI command run on the target node(s).
|
| stderr
list
|
on error |
The set of error responses from the vrouterbgp command.
|
| stdout
list
|
always |
The set of responses from the vrouterbpg command.
|
Status
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
Author
- Pluribus Networks (@amitsi)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/pn_vrouterbgp_module.html