Docs4dev
Docs
ansible / 2.6 / modules / vmware_dvs_portgroup_module.html

vmware_dvs_portgroup - Create or remove a Distributed vSwitch portgroup.

New in version 2.0.

Synopsis

  • Create or remove a Distributed vSwitch portgroup.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.6
  • PyVmomi

Parameters

Parameter Choices/Defaults Comments
hostname
str
The hostname or IP address of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_HOST will be used instead.
Environment variable support added in version 2.6.
network_policy
(added in 2.5)
Default:
{"forged_transmits": false, "mac_changes": false, "promiscuous": false}
Dictionary which configures the different security values for portgroup.
Valid attributes are:
- promiscuous (bool): indicates whether promiscuous mode is allowed. (default: false)
- forged_transmits (bool): indicates whether forged transmits are allowed. (default: false)
- mac_changes (bool): indicates whether mac changes are allowed. (default: false)
num_ports
required
The number of ports the portgroup should contain.
password
str
The password of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_PASSWORD will be used instead.
Environment variable support added in version 2.6.

aliases: pass, pwd
port
int

(added in 2.5)
Default:
443
The port number of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_PORT will be used instead.
Environment variable support added in version 2.6.
port_policy
(added in 2.5)
Default:
{"block_override": true, "ipfix_override": false, "live_port_move": false, "network_rp_override": false, "port_config_reset_at_disconnect": true, "security_override": false, "shaping_override": false, "traffic_filter_override": false, "uplink_teaming_override": false, "vendor_config_override": false, "vlan_override": false}
Dictionary which configures the advanced policy settings for the portgroup.
Valid attributes are:
- block_override (bool): indicates if the block policy can be changed per port. (default: true)
- ipfix_override (bool): indicates if the ipfix policy can be changed per port. (default: false)
- live_port_move (bool): indicates if a live port can be moved in or out of the portgroup. (default: false)
- network_rp_override (bool): indicates if the network resource pool can be changed per port. (default: false)
- port_config_reset_at_disconnect (bool): indicates if the configuration of a port is reset automatically after disconnect. (default: true)
- security_override (bool): indicates if the security policy can be changed per port. (default: false)
- shaping_override (bool): indicates if the shaping policy can be changed per port. (default: false)
- traffic_filter_override (bool): indicates if the traffic filter can be changed per port. (default: false)
- uplink_teaming_override (bool): indicates if the uplink teaming policy can be changed per port. (default: false)
- vendor_config_override (bool): indicates if the vendor config can be changed per port. (default: false)
- vlan_override (bool): indicates if the vlan can be changed per port. (default: false)
portgroup_name
required
The name of the portgroup that is to be created or deleted.
portgroup_type
required
    Choices:
  • earlyBinding
  • lateBinding
  • ephemeral
See VMware KB 1022312 regarding portgroup types.
state
bool

required

(added in 2.5)
    Choices:
  • no
  • yes
Determines if the portgroup should be present or not.
switch_name
required
The name of the distributed vSwitch the port group should be created on.
teaming_policy
(added in 2.5)
Default:
{"inbound_policy": false, "load_balance_policy": "loadbalance_srcid", "notify_switches": true, "rolling_order": false}
Dictionary which configures the different teaming values for portgroup.
Valid attributes are:
- load_balance_policy (string): Network adapter teaming policy. (default: loadbalance_srcid)
- choices: [ loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, failover_explicit]
- inbound_policy (bool): Indicate whether or not the teaming policy is applied to inbound frames as well. (default: False)
- notify_switches (bool): Indicate whether or not to notify the physical switch if a link fails. (default: True)
- rolling_order (bool): Indicate whether or not to use a rolling policy when restoring links. (default: False)
username
str
The username of the vSphere vCenter or ESXi server.
If the value is not specified in the task, the value of environment variable VMWARE_USER will be used instead.
Environment variable support added in version 2.6.

aliases: admin, user
validate_certs
bool
    Choices:
  • no
  • yes ←
Allows connection when SSL certificates are not valid. Set to false when certificates are not trusted.
If the value is not specified in the task, the value of environment variable VMWARE_VALIDATE_CERTS will be used instead.
Environment variable support added in version 2.6.
If set to yes, please make sure Python >= 2.7.9 is installed on the given machine.
vlan_id
required
The VLAN ID that should be configured with the portgroup, use 0 for no VLAN.
If vlan_trunk is configured to be true, this can be a range, example: 1-4094.
vlan_trunk
bool

(added in 2.5)
    Choices:
  • no ←
  • yes
Indicates whether this is a VLAN trunk or not.

Notes

Note

  • Tested on vSphere 5.5
  • Tested on vSphere 6.5

Examples

- name: Create vlan portgroup
  connection: local
  vmware_dvs_portgroup:
     hostname: vcenter_ip_or_hostname
     username: vcenter_username
     password: vcenter_password
     portgroup_name: vlan-123-portrgoup
     switch_name: dvSwitch
     vlan_id: 123
     num_ports: 120
     portgroup_type: earlyBinding
     state: present

- name: Create vlan trunk portgroup
  connection: local
  vmware_dvs_portgroup:
     hostname: vcenter_ip_or_hostname
     username: vcenter_username
     password: vcenter_password
     portgroup_name: vlan-trunk-portrgoup
     switch_name: dvSwitch
     vlan_id: 1-1000
     vlan_trunk: True
     num_ports: 120
     portgroup_type: earlyBinding
     state: present

- name: Create no-vlan portgroup
  connection: local
  vmware_dvs_portgroup:
     hostname: vcenter_ip_or_hostname
     username: vcenter_username
     password: vcenter_password
     portgroup_name: no-vlan-portrgoup
     switch_name: dvSwitch
     vlan_id: 0
     num_ports: 120
     portgroup_type: earlyBinding
     state: present

- name: Create vlan portgroup with all security and port policies
  connection: local
  vmware_dvs_portgroup:
     hostname: vcenter_ip_or_hostname
     username: vcenter_username
     password: vcenter_password
     portgroup_name: vlan-123-portrgoup
     switch_name: dvSwitch
     vlan_id: 123
     num_ports: 120
     portgroup_type: earlyBinding
     state: present
     network_policy:
       promiscuous: yes
       forged_transmits: yes
       mac_changes: yes
     port_policy:
       block_override: yes
       ipfix_override: yes
       live_port_move: yes
       network_rp_override: yes
       port_config_reset_at_disconnect: yes
       security_override: yes
       shaping_override: yes
       traffic_filter_override: yes
       uplink_teaming_override: yes
       vendor_config_override: yes
       vlan_override: yes

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Community, see here.

Author

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.6/modules/vmware_dvs_portgroup_module.html