eos_config – Manage Arista EOS configuration sections
New in version 2.1.
Synopsis
- Arista EOS configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with EOS configuration sections in a deterministic way. This module works with either CLI or eAPI transports.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
after
-
|
The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with
before this allows the playbook designer to append a set of commands to be executed after the command set.
|
||
auth_pass
-
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli and
become: yes with
become_pass .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
Specifies the password to use if required to enter privileged mode on the remote device. If
authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead.
|
||
authorize
boolean
|
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli and
become: yes .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead.
|
|
backup
boolean
added in 2.2
|
|
This argument will cause the module to create a full backup of the current
running-config from the remote device before any changes are made. The backup file is written to the
backup folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
|
|
before
-
|
The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system.
|
||
defaults
boolean
added in 2.2
|
|
The
defaults argument will influence how the running-config is collected from the device. When the value is set to true, the command used to collect the running-config is append with the all keyword. When the value is set to false, the command is issued without the all keyword
|
|
diff_against
-
added in 2.4
|
|
When using the
ansible-playbook --diff command line argument the module can generate diffs against different sources.
When this option is configure as
startup, the module will return the diff of the running-config against the startup-config.
When this option is configured as
intended, the module will return the diff of the running-config against the configuration provided in the
intended_config argument.
When this option is configured as
running, the module will return the before and after diff of the running-config with respect to any changes made to the device configuration.
When this option is configured as
session , the diff returned will be based on the configuration session.
|
|
diff_ignore_lines
-
added in 2.4
|
Use this argument to specify one or more lines that should be ignored during the diff. This is used for lines in the configuration that are automatically updated by the system. This argument takes a list of regular expressions or exact line matches.
|
||
force
boolean
|
|
The force argument instructs the module to not consider the current devices running-config. When set to true, this will cause the module to push the contents of
src into the device without first checking if already configured.
Note this argument should be considered deprecated. To achieve the equivalent, set the
match=none which is idempotent. This argument will be removed in Ansible 2.6.
|
|
intended_config
string
added in 2.4
|
The
intended_config provides the master configuration that the node should conform to and is used to check the final running-config against. This argument will not modify any settings on the remote device and is strictly used to check the compliance of the current device's configuration against. When specifying this argument, the task should also modify the
diff_against value and set it to
intended.
|
||
lines
-
|
The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser.
aliases: commands |
||
match
-
|
|
Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to
line, commands are matched line by line. If match is set to
strict, command lines are matched with respect to position. If match is set to
exact, command lines must be an equal match. Finally, if match is set to
none, the module will not attempt to compare the source configuration with the running configuration on the remote device.
|
|
parents
-
|
The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands.
|
||
provider
-
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
A dict object containing connection details.
|
||
auth_pass
-
|
Specifies the password to use if required to enter privileged mode on the remote device. If
authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead.
|
||
authorize
boolean
|
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead.
|
|
host
- /
required
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
-
|
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either
cli or
eapi transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead.
|
||
port
-
|
Default:
"0 (use common port)"
|
Specifies the port to use when building the connection to the remote device. This value applies to either
cli or
eapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
|
|
ssh_keyfile
-
|
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for
cli transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead.
|
||
timeout
-
|
Default:
10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
transport
- /
required
|
|
Configures the transport connection to use when connecting to the remote device.
|
|
use_proxy
boolean
added in 2.5
|
|
If
no , the environment variables
http_proxy and
https_proxy will be ignored.
|
|
use_ssl
boolean
|
|
Configures the
transport to use SSL if set to true only when the
transport=eapi . If the transport argument is not eapi, this value is ignored.
|
|
username
-
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead.
|
||
validate_certs
boolean
|
|
If
no , SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored.
|
|
replace
-
|
|
Instructs the module on the way to perform the configuration on the device. If the replace argument is set to
line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to
block then the entire command block is pushed to the device in configuration mode if any line is not correct.
|
|
running_config
string
added in 2.4
|
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The
running_config argument allows the implementer to pass in the configuration to use as the base config for this module.
aliases: config |
||
save
boolean
added in 2.2
|
|
The
save argument instructs the module to save the running-config to startup-config. This operation is performed after any changes are made to the current running config. If no changes are made, the configuration is still saved to the startup config. This option will always cause the module to return changed.
This option is deprecated as of Ansible 2.4 and will be removed in Ansible 2.8, use
save_when instead.
|
|
save_when
-
added in 2.4
|
|
When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default. Using this argument will change that before. If the argument is set to
always, then the running-config will always be copied to the startup-config and the
modified flag will always be set to True. If the argument is set to
modified, then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config. If the argument is set to
never, the running-config will never be copied to the startup-config. If the argument is set to
changed, then the running-config will only be copied to the startup-config if the task has made a change.
changed was added in Ansible 2.5.
|
|
src
-
added in 2.2
|
The
src argument provides a path to the configuration file to load into the remote system. The path can either be a full system path to the configuration file if the value starts with / or relative to the root of the implemented role or playbook. This argument is mutually exclusive with the
lines and
parents arguments. It can be a Jinja2 template as well. src file must have same indentation as a live switch config. Arista EOS device config has 3 spaces indentation.
|
Notes
Note
- Tested against EOS 4.15
- Abbreviated commands are NOT idempotent, see Network FAQ.
- For information on using CLI, eAPI and privileged mode see the EOS Platform Options guide
- For more information on using Ansible to manage network devices see the Ansible Network Guide
- For more information on using Ansible to manage Arista EOS devices see the Arista integration page.
Examples
- name: configure top level settings eos_config: lines: hostname {{ inventory_hostname }} - name: diff against a provided master config eos_config: diff_against: config config: "{{ lookup('file', 'master.cfg') }}" - name: load an acl into the device eos_config: lines: - 10 permit ip 192.0.2.1/32 any log - 20 permit ip 192.0.2.2/32 any log - 30 permit ip 192.0.2.3/32 any log - 40 permit ip 192.0.2.4/32 any log parents: ip access-list test before: no ip access-list test replace: block - name: load configuration from file eos_config: src: eos.cfg - name: diff the running config against a master config eos_config: diff_against: intended intended_config: "{{ lookup('file', 'master.cfg') }}" - name: for idempotency, use full-form commands eos_config: lines: # - shut - shutdown # parents: int eth1 parents: interface Ethernet1
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
backup_path
string
|
when backup is yes |
The full path to the backup file
Sample:
/playbooks/ansible/backup/eos_config.2016-07-16@22:28:34
|
commands
list
|
always |
The set of commands that will be pushed to the remote device
Sample:
['hostname switch01', 'interface Ethernet1', 'no shutdown']
|
updates
list
|
always |
The set of commands that will be pushed to the remote device
Sample:
['hostname switch01', 'interface Ethernet1', 'no shutdown']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Peter Sprygada (@privateip)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/eos_config_module.html