aci_static_binding_to_epg – Bind static paths to EPGs (fv:RsPathAtt)

New in version 2.5.

Synopsis

Bind static paths to EPGs on Cisco ACI fabrics.

Parameters

Parameter	Choices/Defaults	Comments
ap -		Name of an existing application network profile, that will contain the EPGs. aliases: app_profile, app_profile_name
certificate_name -		The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. It defaults to the `private_key` basename, without extension. aliases: cert_name
deploy_immediacy -	Choices: immediate lazy	The Deployement Immediacy of Static EPG on PC, VPC or Interface. The APIC defaults to `lazy` when unset during creation.
description - added in 2.7		Description for the static path to EPG binding. aliases: descr
encap_id integer		The encapsulation ID associating the `epg` with the interface path. This acts as the secondary `encap_id` when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between `1` and `4096`. aliases: vlan, vlan_id
epg -		The name of the end point group. aliases: epg_name
extpaths integer		The `extpaths` integer value part of the tDn. `extpaths` is only used if `interface_type` is `fex`. Usually something like `1011`.
host - / required		IP Address or hostname of APIC resolvable by Ansible control host. aliases: hostname
interface -		The `interface` string value part of the tDn. Usually a policy group like `test-IntPolGrp` or an interface of the following format `1/7` depending on `interface_type`.
interface_mode -	Choices: 802.1p access native regular tagged trunk untagged	Determines how layer 2 tags will be read from and added to frames. Values `802.1p` and `native` are identical. Values `access` and `untagged` are identical. Values `regular`, `tagged` and `trunk` are identical. The APIC defaults to `trunk` when unset during creation. aliases: interface_mode_name, mode
interface_type -	Choices: fex port_channel switch_port ← vpc	The type of interface for the static EPG deployement.
leafs -		The switch ID(s) that the `interface` belongs to. When `interface_type` is `switch_port`, `port_channel`, or `fex`, then `leafs` is a string of the leaf ID. When `interface_type` is `vpc`, then `leafs` is a list with both leaf IDs. The `leafs` value is usually something like '101' or '101-102' depending on `connection_type`. aliases: leaves, nodes, paths, switches
output_level -	Choices: debug info normal ←	Influence the output of this ACI module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information
password - / required		The password to use for authentication. This option is mutual exclusive with `private_key`. If `private_key` is provided too, it will be used instead.
pod_id integer		The pod number part of the tDn. `pod_id` is usually an integer below `10`. aliases: pod, pod_number
port -		Port number to be used for REST connection. The default value depends on parameter `use_ssl`.
primary_encap_id integer		Determines the primary encapsulation ID associating the `epg` with the interface path when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between `1` and `4096`. aliases: primary_vlan, primary_vlan_id
private_key - / required		PEM formatted file that contains your private key to be used for signature-based authentication. The name of the key (without extension) is used as the certificate name in ACI, unless `certificate_name` is specified. This option is mutual exclusive with `password`. If `password` is provided too, it will be ignored. aliases: cert_key
state -	Choices: absent present ← query	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects.
tenant -		Name of an existing tenant. aliases: tenant_name
timeout integer	Default: 30	The socket level timeout in seconds.
use_proxy boolean	Choices: no yes ←	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
use_ssl boolean	Choices: no yes ←	If `no`, an HTTP connection will be used instead of the default HTTPS connection.
username -	Default: "admin"	The username to use for authentication. aliases: user
validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates.

Notes

Note

The tenant, ap, epg used must exist before using this module in your playbook. The aci_tenant, aci_ap, aci_epg modules can be used for this.
More information about the internal APIC classes fv:RsPathAtt from the APIC Management Information Model reference.

Examples

- name: Deploy Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    encap_id: 222
    deploy_immediacy: lazy
    interface_mode: untagged
    interface_type: switch_port
    pod_id: 1
    leafs: 101
    interface: '1/7'
    state: present
  delegate_to: localhost

- name: Remove Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    interface_type: switch_port
    pod: 1
    leafs: 101
    interface: '1/7'
    state: absent
  delegate_to: localhost

- name: Get specific Static Path binding for given EPG
  aci_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    interface_type: switch_port
    pod: 1
    leafs: 101
    interface: '1/7'
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
current list	success	The existing configuration from the APIC after the module has finished Sample: [{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error dictionary	failure	The error information as returned from the APIC Sample: {'code': '122', 'text': 'unknown managed object class foo'}
filter_string string	failure or debug	The filter string used for the request Sample: ?rsp-prop-include=config-only
method string	failure or debug	The HTTP method used for the request to the APIC Sample: POST
previous list	info	The original configuration from the APIC before the module has started Sample: [{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed dictionary	info	The assembled configuration from the user-provided parameters Sample: {'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw string	parse error	The raw output returned by the APIC REST API (xml or json) Sample: <?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response string	failure or debug	The HTTP response from the APIC Sample: OK (30 bytes)
sent list	info	The actual/minimal configuration pushed to the APIC Sample: {'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status integer	failure or debug	The HTTP status from the APIC Sample: 200
url string	failure or debug	The HTTP url used for the request to the APIC Sample: https://10.11.12.13/api/mo/uni/tn-production.json

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors

Bruno Calogero (@brunocalogero)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/aci_static_binding_to_epg_module.html

Docs

Docs4dev

Title here

aci_static_binding_to_epg – Bind static paths to EPGs (fv:RsPathAtt)

Synopsis

Parameters

Notes

See Also

Examples

Return Values

Status

Authors