aci_bd_subnet – Manage Subnets (fv:Subnet)

New in version 2.4.

Synopsis

Manage Subnets on Cisco ACI fabrics.

Parameters

Parameter	Choices/Defaults	Comments
bd string		The name of the Bridge Domain. aliases: bd_name
certificate_name string		The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a `private_key` filename was provided, this defaults to the `private_key` basename, without extension. If PEM-formatted content was provided for `private_key`, this defaults to the `username` value. aliases: cert_name
description string		The description for the Subnet. aliases: descr
enable_vip boolean	Choices: no yes	Determines if the Subnet should be treated as a VIP; used when the BD is extended to multiple sites. The APIC defaults to `no` when unset during creation.
gateway string		The IPv4 or IPv6 gateway address for the Subnet. aliases: gateway_ip
host string / required		IP Address or hostname of APIC resolvable by Ansible control host. aliases: hostname
mask integer		The subnet mask for the Subnet. This is the number associated with CIDR notation. For IPv4 addresses, accepted values range between `0` and `32`. For IPv6 addresses, accepted Values range between `0` and `128`. aliases: subnet_mask
nd_prefix_policy string		The IPv6 Neighbor Discovery Prefix Policy to associate with the Subnet.
output_level string	Choices: debug info normal ←	Influence the output of this ACI module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information
password string / required		The password to use for authentication. This option is mutual exclusive with `private_key`. If `private_key` is provided too, it will be used instead.
port integer		Port number to be used for REST connection. The default value depends on parameter `use_ssl`.
preferred boolean	Choices: no yes	Determines if the Subnet is preferred over all available Subnets. Only one Subnet per Address Family (IPv4/IPv6). can be preferred in the Bridge Domain. The APIC defaults to `no` when unset during creation.
private_key string / required		Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default `certificate_name` that is used. This option is mutual exclusive with `password`. If `password` is provided too, it will be ignored. aliases: cert_key
route_profile string		The Route Profile to the associate with the Subnet.
route_profile_l3_out string		The L3 Out that contains the associated Route Profile.
scope list	Choices: private public shared	Determines the scope of the Subnet. The `private` option only allows communication with hosts in the same VRF. The `public` option allows the Subnet to be advertised outside of the ACI Fabric, and allows communication with hosts in other VRFs. The shared option limits communication to hosts in either the same VRF or the shared VRF. The value is a list of options, `private` and `public` are mutually exclusive, but both can be used with `shared`. The APIC defaults to `private` when unset during creation.
state string	Choices: absent present ← query	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects.
subnet_control string	Choices: nd_ra no_gw querier_ip unspecified	Determines the Subnet's Control State. The `querier_ip` option is used to treat the gateway_ip as an IGMP querier source IP. The `nd_ra` option is used to treat the gateway_ip address as a Neighbor Discovery Router Advertisement Prefix. The `no_gw` option is used to remove default gateway functionality from the gateway address. The APIC defaults to `nd_ra` when unset during creation.
subnet_name string		The name of the Subnet. aliases: name
tenant string		The name of the Tenant. aliases: tenant_name
timeout integer	Default: 30	The socket level timeout in seconds.
use_proxy boolean	Choices: no yes ←	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
use_ssl boolean	Choices: no yes ←	If `no`, an HTTP connection will be used instead of the default HTTPS connection.
username string	Default: "admin"	The username to use for authentication. aliases: user
validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates.

Notes

Note

The gateway parameter is the root key used to access the Subnet (not name), so the gateway is required when the state is absent or present.
The tenant and bd used must exist before using this module in your playbook. The aci_tenant module and aci_bd can be used for these.

Examples

- name: Create a tenant
  aci_tenant:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    state: present
  delegate_to: localhost

- name: Create a bridge domain
  aci_bd:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    state: present
  delegate_to: localhost

- name: Create a subnet
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: present
  delegate_to: localhost

- name: Create a subnet with options
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    subnet_name: sql
    gateway: 10.1.2.1
    mask: 23
    description: SQL Servers
    scope: public
    route_profile_l3_out: corp
    route_profile: corp_route_profile
    state: present
  delegate_to: localhost

- name: Update a subnets scope to private and shared
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    scope: [private, shared]
    state: present
  delegate_to: localhost

- name: Get all subnets
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost

- name: Get all subnets of specific gateway in specified tenant
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    gateway: 10.1.1.1
    mask: 24
    state: query
  delegate_to: localhost
  register: query_result

- name: Get specific subnet
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: query
  delegate_to: localhost
  register: query_result

- name: Delete a subnet
  aci_bd_subnet:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: production
    bd: database
    gateway: 10.1.1.1
    mask: 24
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
current list	success	The existing configuration from the APIC after the module has finished Sample: [{'fvTenant': {'attributes': {'descr': 'Production environment', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
error dictionary	failure	The error information as returned from the APIC Sample: {'code': '122', 'text': 'unknown managed object class foo'}
filter_string string	failure or debug	The filter string used for the request Sample: ?rsp-prop-include=config-only
method string	failure or debug	The HTTP method used for the request to the APIC Sample: POST
previous list	info	The original configuration from the APIC before the module has started Sample: [{'fvTenant': {'attributes': {'descr': 'Production', 'dn': 'uni/tn-production', 'name': 'production', 'nameAlias': '', 'ownerKey': '', 'ownerTag': ''}}}]
proposed dictionary	info	The assembled configuration from the user-provided parameters Sample: {'fvTenant': {'attributes': {'descr': 'Production environment', 'name': 'production'}}}
raw string	parse error	The raw output returned by the APIC REST API (xml or json) Sample: <?xml version="1.0" encoding="UTF-8"?><imdata totalCount="1"><error code="122" text="unknown managed object class foo"/></imdata>
response string	failure or debug	The HTTP response from the APIC Sample: OK (30 bytes)
sent list	info	The actual/minimal configuration pushed to the APIC Sample: {'fvTenant': {'attributes': {'descr': 'Production environment'}}}
status integer	failure or debug	The HTTP status from the APIC Sample: 200
url string	failure or debug	The HTTP url used for the request to the APIC Sample: https://10.11.12.13/api/mo/uni/tn-production.json

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by an Ansible Partner. [certified]

Authors

Jacob McGill (@jmcgill298)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/aci_bd_subnet_module.html

Docs

Docs4dev

Title here