bigip_ike_peer – Manage IPSec IKE Peer configuration on BIG-IP
New in version 2.8.
Synopsis
- Manage IPSec IKE Peer configuration on BIG-IP.
Parameters
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| description
string
|
Description of the IKE peer.
|
||
| name
string / required
|
Specifies the name of the IKE peer.
|
||
| partition
string
|
Default:
"Common"
|
Device partition to manage resources on.
|
|
| password
string / required
|
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable
F5_PASSWORD.
aliases: pass, pwd |
||
| phase1_auth_method
string
|
|
Specifies the authentication method for phase 1 negotiation.
When creating a new IKE peer, if this value is not specified, the default is rsa-signature.
|
|
| phase1_cert
string
|
Specifies the digital certificate to use for the RSA signature.
When creating a new IKE peer, if this value is not specified, and
phase1_auth_method is rsa-signature, the default is default.crt.
This parameter is invalid when phase1_auth_method is pre-shared-key.
|
||
| phase1_encryption_algorithm
string
|
|
Specifies the algorithm to use for IKE encryption.
IKE version v2 does not support blowfish, camellia, or cast128.
|
|
| phase1_hash_algorithm
string
|
|
Specifies the algorithm to use for IKE authentication.
|
|
| phase1_key
string
|
Specifies the public key that the digital certificate contains.
When creating a new IKE peer, if this value is not specified, and
phase1_auth_method is rsa-signature, the default is default.key.
This parameter is invalid when phase1_auth_method is pre-shared-key.
|
||
| phase1_perfect_forward_secrecy
string
|
|
Specifies the Diffie-Hellman group to use for IKE Phase 1 and Phase 2 negotiations.
|
|
| phase1_verify_peer_cert
boolean
|
|
In IKEv2, specifies whether the certificate sent by the IKE peer is verified using the Trusted Certificate Authorities, a CRL, and/or a peer certificate.
In IKEv1, specifies whether the identifier sent by the peer is verified with the credentials in the certificate, in the following manner - ASN1DN; specifies that the entire certificate subject name is compared with the identifier. Address, FQDN, or User FQDN; specifies that the certificate's subjectAltName is compared with the identifier. If the two do not match, the negotiation fails.
When creating a new IKE peer, if this value is not specified, and
phase1_auth_method is rsa-signature, the default is no.
This parameter is invalid when phase1_auth_method is pre-shared-key.
|
|
| presented_id_type
string
|
|
Specifies the identifier type that the local system uses to identify itself to the peer during IKE Phase 1 negotiations.
|
|
| presented_id_value
string
|
This is a required value when
version includes (Cv2).
Specifies a value for the identity when using a presented_id_type of override.
|
||
| preshared_key
string
|
Specifies a string that the IKE peers share for authenticating each other.
This parameter is only relevant when
phase1_auth_method is pre-shared-key.
This parameter is invalid when phase1_auth_method is rsa-signature.
|
||
| provider
dictionary
added in 2.5
|
A dict object containing connection details.
|
||
| password
string / required
|
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable
F5_PASSWORD.
aliases: pass, pwd |
||
| server
string / required
|
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
|
||
| server_port
integer
|
Default:
443
|
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
|
|
| ssh_keyfile
path
|
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
|
||
| timeout
integer
|
Default:
10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
| transport
string
|
|
Configures the transport connection to use when connecting to the remote device.
|
|
| user
string / required
|
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
|
||
| validate_certs
boolean
|
|
If
no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
|
|
| remote_address
string
|
Displays the IP address of the BIG-IP system that is remote to the system you are configuring.
|
||
| server
string / required
|
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
|
||
| server_port
integer
added in 2.2
|
Default:
443
|
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
|
|
| state
string
|
|
When
present, ensures that the resource exists.
When absent, ensures the resource is removed.
|
|
| update_password
string
|
|
always will allow to update passwords if the user chooses to do so. on_create will only set the password for newly created IKE peers.
|
|
| user
string / required
|
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
|
||
| validate_certs
boolean
added in 2.0
|
|
If
no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
|
|
| verified_id_type
string
|
|
Specifies the identifier type that the local system uses to identify the peer during IKE Phase 1 negotiation.
This is a required value when
version includes (Cv2).
When user-fqdn, value of verified_id_value must be in the form of User @ DNS domain string.
|
|
| verified_id_value
string
|
This is a required value when
version includes (Cv2).
Specifies a value for the identity when using a verified_id_type of override.
|
||
| version
list
|
|
Specifies which version of IKE is used.
If the system you are configuring is the IPsec initiator, and you select both versions, the system tries using IKEv2 for negotiation. If the remote peer does not support IKEv2, the IPsec tunnel fails. To use IKEv1 in this case, you must deselect Version 2 and try again.
If the system you are configuring is the IPsec responder, and you select both versions, the IPsec initiator system determines which IKE version to use.
When creating a new IKE peer, this value is required.
|
|
Notes
Note
- For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Create new IKE peer
bigip_ike_peer:
name: ike1
remote_address: 1.2.3.4
version:
- v1
provider:
password: secret
server: lb.mydomain.com
user: admin
delegate_to: localhost
- name: Change presented id type - keyid-tag
bigip_ike_peer:
name: ike1
presented_id_type: keyid-tag
presented_id_value: key1
provider:
password: secret
server: lb.mydomain.com
user: admin
delegate_to: localhost
- name: Remove IKE peer
bigip_ike_peer:
name: ike1
state: absent
provider:
password: secret
server: lb.mydomain.com
user: admin
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| phase1_auth_method
string
|
changed |
The new IKE Phase 1 Credentials Authentication Method value of the resource.
Sample:
rsa-signature
|
| phase1_cert
string
|
changed |
The new IKE Phase 1 Certificate Credentials.
Sample:
/Common/cert1.crt
|
| phase1_encryption_algorithm
string
|
changed |
The new IKE Phase 1 Encryption Algorithm.
Sample:
3des
|
| phase1_hash_algorithm
string
|
changed |
The new IKE Phase 1 Authentication Algorithm.
Sample:
sha256
|
| phase1_key
string
|
changed |
The new IKE Phase 1 Key Credentials.
Sample:
/Common/cert1.key
|
| phase1_perfect_forward_secrecy
string
|
changed |
The new IKE Phase 1 Perfect Forward Secrecy.
Sample:
modp1024
|
| phase1_verify_peer_cert
boolean
|
changed |
The new IKE Phase 1 Key Verify Peer Certificate setting.
Sample:
True
|
| presented_id_type
string
|
changed |
The new Presented ID Type value of the resource.
Sample:
address
|
| presented_id_value
string
|
changed |
The new Presented ID Value setting for the Presented ID Type.
Sample:
1.2.3.1
|
| remote_address
string
|
changed |
The new Remote Address value of the resource.
Sample:
1.2.2.1
|
| verified_id_type
string
|
changed |
The new Verified ID Type value of the resource.
Sample:
address
|
| verified_id_value
string
|
changed |
The new Verified ID Value setting for the Verified ID Type.
Sample:
1.2.3.1
|
| version
list
|
changed |
The new list of IKE versions.
Sample:
['v1', 'v2']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Tim Rupp (@caphrim007)
- Wojciech Wypior (@wojtek0806)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_ike_peer_module.html