bigip_profile_http2 – Manage HTTP2 profiles on a BIG-IP
New in version 2.8.
Synopsis
- Manage HTTP2 profiles on a BIG-IP.
Parameters
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| activation_modes
list
|
|
Specifies what will cause an incoming connection to be handled as a HTTP/2 connection.
The
alpn and always are mutually exclusive.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
|
|
| description
string
|
Description of the profile.
|
||
| enforce_tls_requirements
boolean
|
|
Specifies whether the system requires TLS for communications between specified senders and recipients.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
|
|
| frame_size
integer
|
Specifies the size of data frames, in bytes, that HTTP/2 sends to the client.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
The valid value range in bytes is 1024 - 16384.
|
||
| header_table_size
integer
|
Specifies the size of the header table, in bytes.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
The valid value range in bytes is 0 - 65535.
|
||
| idle_timeout
integer
|
Specifies the number of seconds that an HTTP/2 connection is idly left open before being shut down.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
|
||
| insert_header
boolean
|
|
Specifies whether an HTTP header indicating the use of HTTP/2 should be inserted into the request that goes to the server.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
|
|
| insert_header_name
string
|
Specifies the name of the HTTP header controlled by
insert_header parameter.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
|
||
| name
string / required
|
Specifies the name of the profile.
|
||
| parent
string
|
Default:
"/Common/http2"
|
Specifies the profile from which this profile inherits settings.
When creating a new profile, if this parameter is not specified, the default is the system-supplied http2 profile.
|
|
| partition
string
|
Default:
"Common"
|
Device partition to manage resources on.
|
|
| password
string / required
|
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable
F5_PASSWORD.
aliases: pass, pwd |
||
| provider
dictionary
added in 2.5
|
A dict object containing connection details.
|
||
| password
string / required
|
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable
F5_PASSWORD.
aliases: pass, pwd |
||
| server
string / required
|
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
|
||
| server_port
integer
|
Default:
443
|
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
|
|
| ssh_keyfile
path
|
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
|
||
| timeout
integer
|
Default:
10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
| transport
string
|
|
Configures the transport connection to use when connecting to the remote device.
|
|
| user
string / required
|
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
|
||
| validate_certs
boolean
|
|
If
no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
|
|
| receive_window
integer
|
Specifies the way that the HTTP/2 profile performs flow control.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
The valid value range in kilobytes is 16 - 128.
|
||
| server
string / required
|
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
|
||
| server_port
integer
added in 2.2
|
Default:
443
|
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
|
|
| state
string
|
|
When
present, ensures that the profile exists.
When absent, ensures the profile is removed.
|
|
| streams
integer
|
Specifies the number of outstanding concurrent requests that are allowed on a single HTTP/2 connection.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
The valid value range is 1 - 256.
|
||
| user
string / required
|
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
|
||
| validate_certs
boolean
added in 2.0
|
|
If
no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
|
|
| write_size
integer
|
Specifies the total size of combined data frames, in bytes, that HTTP/2 sends in a single write.
When creating a new profile, if this parameter is not specified, the default is provided by the parent profile.
The valid value range in bytes is 2048 - 32768.
|
||
Notes
Note
- For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Create HTTP2 profile
bigip_profile_http2:
name: my_profile
insert_header: yes
insert_header_name: FOO
state: present
provider:
user: admin
password: secret
server: lb.mydomain.com
delegate_to: localhost
- name: Remove HTTP profile
bigip_profile_http2:
name: my_profile
state: absent
provider:
server: lb.mydomain.com
user: admin
password: secret
delegate_to: localhost
- name: Add HTTP profile set activation modes
bigip_profile_http:
name: my_profile
activation_modes:
- always
provider:
password: secret
server: lb.mydomain.com
user: admin
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| activation_modes
list
|
changed |
Specifies HTTP/2 connection handling modes
Sample:
['always']
|
| description
string
|
changed |
Description of the profile.
Sample:
My profile
|
| enforce_tls_requirements
boolean
|
changed |
pecifies whether the system requires TLS for communications.
Sample:
True
|
| frame_size
integer
|
changed |
The size of the data frames
Sample:
30
|
| insert_header_name
string
|
changed |
Specifies the name of the HTTP2 header
Sample:
X-HTTP2
|
| streams
integer
|
changed |
The number of outstanding concurrent requests allowed on a single HTTP/2 connection
Sample:
30
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Wojciech Wypior (@wojtek0806)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_profile_http2_module.html