ce_dldp – Manages global DLDP configuration on HUAWEI CloudEngine switches

New in version 2.4.

Synopsis

Manages global DLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
auth_mode -	Choices: md5 simple sha hmac-sha256 none	Specifies authentication algorithm of DLDP.
auth_pwd -		Specifies authentication password. The value is a string of 1 to 16 case-sensitive plaintexts or 24/32/48/108/128 case-sensitive encrypted characters. The string excludes a question mark (?).
enable -	Choices: enable disable	Set global DLDP enable state.
reset -	Choices: enable disable	Specify whether reset DLDP state of disabled interfaces.
time_internal -		Specifies the interval for sending Advertisement packets. The value is an integer ranging from 1 to 100, in seconds. The default interval for sending Advertisement packets is 5 seconds.
work_mode -	Choices: enhance normal	Set global DLDP work-mode.

Notes

Note

The relevant configurations will be deleted if DLDP is disabled using enable=disable.
When using auth_mode=none, it will restore the default DLDP authentication mode. By default, DLDP packets are not authenticated.
By default, the working mode of DLDP is enhance, so you are advised to use work_mode=enhance to restore default DLDP working mode.
The default interval for sending Advertisement packets is 5 seconds, so you are advised to use time_interval=5 to restore default DLDP interval.
This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is netconf.
This module also works with local connections for legacy playbooks.

Examples

- name: DLDP test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Configure global DLDP enable state"
    ce_dldp:
      enable: enable
      provider: "{{ cli }}"

  - name: "Configure DLDP work-mode and ensure global DLDP state is already enabled"
    ce_dldp:
      enable: enable
      work_mode: normal
      provider: "{{ cli }}"

  - name: "Configure advertisement message time interval in seconds and ensure global DLDP state is already enabled"
    ce_dldp:
      enable: enable
      time_interval: 6
      provider: "{{ cli }}"

  - name: "Configure a DLDP authentication mode and ensure global DLDP state is already enabled"
    ce_dldp:
      enable: enable
      auth_mode: md5
      auth_pwd: abc
      provider: "{{ cli }}"

  - name: "Reset DLDP state of disabled interfaces and ensure global DLDP state is already enabled"
    ce_dldp:
      enable: enable
      reset: enable
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of global DLDP configuration after module execution Sample: {'enable': 'enable', 'reset': 'enable', 'time_internal': '12', 'work_mode': 'normal'}
existing dictionary	always	k/v pairs of existing global DLDP configuration Sample: {'enable': 'disable', 'reset': 'disable', 'time_internal': '5', 'work_mode': 'enhance'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'enable': 'enable', 'reset': 'enable', 'time_internal': '12', 'work_mode': 'normal'}
updates list	always	command sent to the device Sample: ['dldp enable', 'dldp work-mode normal', 'dldp interval 12', 'dldp reset']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Zhijin Zhou (@QijunPan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_dldp_module.html

Docs

Docs4dev

Title here