Docs4dev
Docs
ansible / 2.8 / modules / ce_interface_ospf_module.html

ce_interface_ospf – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches

New in version 2.4.

Synopsis

  • Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Parameters

Parameter Choices/Defaults Comments
area
- / required
Ospf area associated with this ospf process. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295.
auth_key_id
-
Authentication key id when auth_mode is 'hmac-sha256', 'md5' or 'hmac-md5. Valid value is an integer is in the range from 1 to 255.
auth_mode
-
    Choices:
  • none
  • null
  • hmac-sha256
  • md5
  • hmac-md5
  • simple
Specifies the authentication type.
auth_text_md5
-
Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
auth_text_simple
-
Specifies a password for simple authentication. The value is a string of 1 to 8 characters.
cost
-
The cost associated with this interface. Valid values are an integer in the range from 1 to 65535.
dead_interval
-
Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer in the range from 1 to 235926000.
hello_interval
-
Time between sending successive hello packets. Valid values are an integer in the range from 1 to 65535.
interface
- / required
Full name of interface, i.e. 40GE1/0/10.
process_id
- / required
Specifies a process ID. The value is an integer ranging from 1 to 4294967295.
silent_interface
boolean
    Choices:
  • no ←
  • yes
Setting to true will prevent this interface from receiving HELLO packets. Valid values are 'true' and 'false'.
state
-
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Recommended connection is netconf.
  • This module also works with local connections for legacy playbooks.

Examples

- name: eth_trunk module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Enables OSPF and sets the cost on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      cost: 100
      provider: '{{ cli }}'

  - name: Sets the dead interval of the OSPF neighbor
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      dead_interval: 100
      provider: '{{ cli }}'

  - name: Sets the interval for sending Hello packets on an interface
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      hello_interval: 2
      provider: '{{ cli }}'

  - name: Disables an interface from receiving and sending OSPF packets
    ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      silent_interface: true
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
check to see if a change was made on the device

Sample:
True
end_state
dictionary
verbose mode
k/v pairs of configuration after module execution

Sample:
{'process_id': '1', 'area': '0.0.0.100', 'interface': '10GE1/0/30', 'cost': '100', 'dead_interval': '40', 'hello_interval': '10', 'silent_interface': 'false', 'auth_mode': 'none'}
existing
dictionary
verbose mode
k/v pairs of existing configuration

Sample:
{'process_id': '1', 'area': '0.0.0.100'}
proposed
dictionary
verbose mode
k/v pairs of parameters passed into module

Sample:
{'process_id': '1', 'area': '0.0.0.100', 'interface': '10GE1/0/30', 'cost': '100'}
updates
list
always
commands sent to the device

Sample:
['interface 10GE1/0/30', 'ospf enable 1 area 0.0.0.100', 'ospf cost 100']


Status

Authors

  • QijunPan (@QijunPan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ce_interface_ospf_module.html