pn_igmp_snooping – CLI command to modify igmp-snooping
New in version 2.8.
Synopsis
- This module can be used to modify Internet Group Management Protocol (IGMP) snooping.
Parameters
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| pn_cliswitch
string
|
Target switch to run the CLI on.
|
|
| pn_enable
boolean
|
|
enable or disable IGMP snooping.
|
| pn_enable_vlans
string
|
enable per VLAN IGMP snooping.
|
|
| pn_igmpv2_vlans
string
|
VLANs on which to use IGMPv2 protocol.
|
|
| pn_igmpv3_vlans
string
|
VLANs on which to use IGMPv3 protocol.
|
|
| pn_no_snoop_linklocal_vlans
string
|
Remove snooping of link-local groups(224.0.0.0/24) on these vlans.
|
|
| pn_query_interval
string
|
IGMP query interval in seconds.
|
|
| pn_query_max_response_time
string
|
maximum response time, in seconds, advertised in IGMP queries.
|
|
| pn_scope
-
|
|
IGMP snooping scope - fabric or local.
|
| pn_snoop_linklocal_vlans
string
|
Allow snooping of link-local groups(224.0.0.0/24) on these vlans.
|
|
| pn_vxlan
boolean
|
|
enable or disable IGMP snooping on vxlans.
|
| state
string / required
|
|
State the action to perform. Use update to modify the igmp-snooping.
|
Examples
- name: 'Modify IGMP Snooping'
pn_igmp_snooping:
pn_cliswitch: 'sw01'
state: 'update'
pn_vxlan: True
pn_enable_vlans: '1-399,401-4092'
pn_no_snoop_linklocal_vlans: 'none'
pn_igmpv3_vlans: '1-399,401-4092'
- name: 'Modify IGMP Snooping'
pn_igmp_snooping:
pn_cliswitch: 'sw01'
state: 'update'
pn_vxlan: False
pn_enable_vlans: '1-399'
pn_no_snoop_linklocal_vlans: 'none'
pn_igmpv3_vlans: '1-399'
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| changed
boolean
|
always |
indicates whether the CLI caused changes on the target.
|
| command
string
|
always |
the CLI command run on the target node.
|
| stderr
list
|
on error |
set of error responses from the igmp-snooping command.
|
| stdout
list
|
always |
set of responses from the igmp-snooping command.
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Pluribus Networks (@rajaspachipulusu17)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/pn_igmp_snooping_module.html