slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices
New in version 2.6.
Synopsis
- This module provides declarative management of Layer-2 interface on Extreme slxos devices.
Parameters
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| access_vlan
-
|
Configure given VLAN in access port. If mode=access, used as the access VLAN ID.
|
|
| aggregate
-
|
List of Layer-2 interface definitions.
|
|
| mode
-
|
|
Mode in which interface needs to be configured.
|
| name
- / required
|
Full name of the interface excluding any logical unit number, i.e. Ethernet 0/1.
aliases: interface |
|
| native_vlan
-
|
Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID.
|
|
| state
-
|
|
Manage the state of the Layer-2 Interface configuration.
|
| trunk_allowed_vlans
-
|
List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
|
|
| trunk_vlans
-
|
List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk.
|
Examples
- name: Ensure Ethernet 0/5 is in its default l2 interface state
slxos_l2_interface:
name: Ethernet 0/5
state: unconfigured
- name: Ensure Ethernet 0/5 is configured for access vlan 20
slxos_l2_interface:
name: Ethernet 0/5
mode: access
access_vlan: 20
- name: Ensure Ethernet 0/5 only has vlans 5-10 as trunk vlans
slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
native_vlan: 10
trunk_vlans: 5-10
- name: Ensure Ethernet 0/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
native_vlan: 10
trunk_vlans: 2-50
- name: Ensure these VLANs are not being tagged on the trunk
slxos_l2_interface:
name: Ethernet 0/5
mode: trunk
trunk_vlans: 51-4094
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| commands
list
|
always, except for the platforms that use Netconf transport to manage the device. |
The list of configuration mode commands to send to the device
Sample:
['interface Ethernet 0/5', 'switchport access vlan 20']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Matthew Stone (@bigmstone)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/slxos_l2_interface_module.html