ss_3par_cpg – Manage HPE StoreServ 3PAR CPG
New in version 2.8.
Synopsis
- Create and delete CPG on HPE 3PAR.
Requirements
The below requirements are needed on the host that executes this module.
- hpe3par_sdk >= 1.0.2. Install using ‘pip install hpe3par_sdk’
- WSAPI service should be enabled on the 3PAR storage array.
Parameters
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| cpg_name
string / required
|
Name of the CPG.
|
|
| disk_type
string
|
|
Specifies that physical disks must have the specified device type.
|
| domain
string
|
Specifies the name of the domain in which the object will reside.
|
|
| growth_increment
string
|
Specifies the growth increment(in MiB, GiB or TiB) the amount of logical disk storage created on each auto-grow operation.
|
|
| growth_limit
string
|
Specifies that the autogrow operation is limited to the specified storage amount that sets the growth limit(in MiB, GiB or TiB).
|
|
| growth_warning
string
|
Specifies that the threshold(in MiB, GiB or TiB) of used logical disk space when exceeded results in a warning alert.
|
|
| high_availability
string
|
|
Specifies that the layout must support the failure of one port pair, one cage, or one magazine.
|
| raid_type
string
|
|
Specifies the RAID type for the logical disk.
|
| secure
boolean
|
|
Specifies whether the certificate needs to be validated while communicating.
|
| set_size
integer
|
Specifies the set size in the number of chunklets.
|
|
| state
string / required
|
|
Whether the specified CPG should exist or not.
|
| storage_system_ip
string / required
|
The storage system IP address.
|
|
| storage_system_password
string / required
|
The storage system password.
|
|
| storage_system_username
string / required
|
The storage system user name.
|
Notes
Note
- check_mode not supported
Examples
- name: Create CPG sample_cpg
ss_3par_cpg:
storage_system_ip: 10.10.10.1
storage_system_username: username
storage_system_password: password
state: present
cpg_name: sample_cpg
domain: sample_domain
growth_increment: 32000 MiB
growth_limit: 64000 MiB
growth_warning: 48000 MiB
raid_type: R6
set_size: 8
high_availability: MAG
disk_type: FC
secure: no
- name: Delete CPG sample_cpg
ss_3par_cpg:
storage_system_ip: 10.10.10.1
storage_system_username: username
storage_system_password: password
state: absent
cpg_name: sample_cpg
secure: no
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Farhan Nomani (@farhan7500)
- Gautham P Hegde (@gautamphegde)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/ss_3par_cpg_module.html