eos_interface – Manage Interface on Arista EOS network devices
New in version 2.5.
DEPRECATED
Removed in Ansible: | |
---|---|
version: 2.13 | |
Why: | Updated modules released with more functionality |
Alternative: | eos_interfaces |
Synopsis
- This module provides declarative management of Interfaces on Arista EOS network devices.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
aggregate
list
|
List of Interfaces definitions. Each of the entry in aggregate list should define name of interface
name and other options as required.
|
||
auth_pass
string
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli and
become: yes with
become_pass .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
Specifies the password to use if required to enter privileged mode on the remote device. If
authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead.
|
||
authorize
boolean
|
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli and
become: yes .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead.
|
|
delay
integer
|
Default:
10
|
Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are
state with values
up /
down ,
tx_rate and
rx_rate.
|
|
description
string
|
Description of Interface upto 240 characters.
|
||
enabled
boolean
|
|
Interface link status. If the value is
True the interface state will be enabled, else if value is
False interface will be in disable (shutdown) state.
|
|
mtu
string
|
Set maximum transmission unit size in bytes of transmit packet for the interface given in
name option.
|
||
name
string /
required
|
Name of the Interface to be configured on remote device. The name of interface should be in expanded format and not abbreviated.
|
||
neighbors
list
|
Check the operational state of given interface
name for LLDP neighbor.
The following suboptions are available.
|
||
host
-
|
LLDP neighbor host for given interface
name .
|
||
port
-
|
LLDP neighbor port to which given interface
name is connected.
|
||
provider
dictionary
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli .
This option is only required if you are using eAPI.
For more information please see the
EOS Platform Options guide.
A dict object containing connection details.
|
||
auth_pass
string
|
Specifies the password to use if required to enter privileged mode on the remote device. If
authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTH_PASS will be used instead.
|
||
authorize
boolean
|
|
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_AUTHORIZE will be used instead.
|
|
host
string /
required
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
||
password
string
|
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either
cli or
eapi transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead.
|
||
port
integer
|
Default:
0
|
Specifies the port to use when building the connection to the remote device. This value applies to either
cli or
eapi.
The port value will default to the appropriate transport common port if none is provided in the task (cli=22, http=80, https=443).
|
|
ssh_keyfile
path
|
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for
cli transports. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead.
|
||
timeout
integer
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
||
transport
string /
required
|
|
Configures the transport connection to use when connecting to the remote device.
|
|
use_proxy
boolean
added in 2.5
|
|
If
no , the environment variables
http_proxy and
https_proxy will be ignored.
|
|
use_ssl
boolean
|
|
Configures the
transport to use SSL if set to
yes only when the
transport=eapi . If the transport argument is not eapi, this value is ignored.
|
|
username
string
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead.
|
||
validate_certs
boolean
|
|
If
no , SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored.
|
|
rx_rate
string
|
Receiver rate in bits per second (bps) for the interface given in
name option.
This is state check parameter only.
Supports conditionals, see
Conditionals in Networking Modules
|
||
speed
string
|
This option configures autoneg and speed/duplex/flowcontrol for the interface given in
name option.
|
||
state
string
|
|
State of the Interface configuration,
up means present and operationally up and
down means present and operationally
down
|
|
tx_rate
string
|
Transmit rate in bits per second (bps) for the interface given in
name option.
This is state check parameter only.
Supports conditionals, see
Conditionals in Networking Modules
|
Notes
Note
- Tested against EOS 4.15
- For information on using CLI, eAPI and privileged mode see the EOS Platform Options guide
- For more information on using Ansible to manage network devices see the Ansible Network Guide
- For more information on using Ansible to manage Arista EOS devices see the Arista integration page.
Examples
- name: configure interface eos_interface: name: ethernet1 description: test-interface speed: 100full mtu: 512 - name: remove interface eos_interface: name: ethernet1 state: absent - name: make interface up eos_interface: name: ethernet1 enabled: True - name: make interface down eos_interface: name: ethernet1 enabled: False - name: Check intent arguments eos_interface: name: ethernet1 state: up tx_rate: ge(0) rx_rate: le(0) - name: Check neighbors intent arguments eos_interface: name: ethernet1 neighbors: - port: eth0 host: netdev - name: Configure interface in disabled state and check if the operational state is disabled or not eos_interface: name: ethernet1 enabled: False state: down - name: Add interface using aggregate eos_interface: aggregate: - { name: ethernet1, mtu: 256, description: test-interface-1 } - { name: ethernet2, mtu: 516, description: test-interface-2 } speed: 100full state: present - name: Delete interface using aggregate eos_interface: aggregate: - name: loopback9 - name: loopback10 state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands
list
|
always, except for the platforms that use Netconf transport to manage the device. |
The list of configuration mode commands to send to the device.
Sample:
['interface ethernet1', 'description test-interface', 'speed 100full', 'mtu 512']
|
Status
- This module will be removed in version 2.13. [deprecated]
- For more information see DEPRECATED.
Authors
- Ganesh Nalawade (@ganeshrn)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/eos_interface_module.html