onyx_traffic_class – Configures Traffic Class
New in version 2.9.
Synopsis
- This module provides declarative management of Traffic Class configuration on Mellanox ONYX network devices.
Parameters
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
congestion_control
-
|
configure congestion control on interface.
|
||
control
- /
required
|
|
congestion control type.
|
|
max_threshold
- /
required
|
Set maximum-threshold value (in KBs) for marking traffic-class queue.
|
||
min_threshold
- /
required
|
Set minimum-threshold value (in KBs) for marking traffic-class queue.
|
||
threshold_mode
- /
required
|
|
congestion control threshold mode.
|
|
dcb
-
|
configure dcb control on interface.
|
||
mode
- /
required
|
|
dcb control mode.
|
|
weight
-
|
Relevant only for wrr mode.
|
||
interfaces
- /
required
|
list of interfaces name.
|
||
state
-
|
|
enable congestion control on interface.
|
|
tc
- /
required
|
traffic class, range 0-7.
|
Examples
- name: configure traffic class onyx_traffic_class: interfaces: - Eth1/1 - Eth1/2 tc: 3 congestion_control: control: ecn threshold_mode: absolute min_threshold: 500 max_threshold: 1500 dcb: mode: strict
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands
list
|
always |
The list of configuration mode commands to send to the device.
Sample:
['interface ethernet 1/15 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface ethernet 1/16 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface mlag-port-channel 7 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface port-channel 1 traffic-class 3 congestion-control ecn minimum-absolute 150 maximum-absolute 1500', 'interface ethernet 1/15 traffic-class 3 dcb ets strict', 'interface ethernet 1/16 traffic-class 3 dcb ets strict', 'interface mlag-port-channel 7 traffic-class 3 dcb ets strict', 'interface port-channel 1 traffic-class 3 dcb ets strict']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Anas Badaha (@anasb)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/onyx_traffic_class_module.html