ss_3par_cpg – Manage HPE StoreServ 3PAR CPG
New in version 2.8.
Synopsis
- Create and delete CPG on HPE 3PAR.
Requirements
The below requirements are needed on the host that executes this module.
- hpe3par_sdk >= 1.0.2. Install using ‘pip install hpe3par_sdk’
- WSAPI service should be enabled on the 3PAR storage array.
Parameters
Parameter | Choices/Defaults | Comments |
---|---|---|
cpg_name
string /
required
|
Name of the CPG.
|
|
disk_type
string
|
|
Specifies that physical disks must have the specified device type.
|
domain
string
|
Specifies the name of the domain in which the object will reside.
|
|
growth_increment
string
|
Specifies the growth increment(in MiB, GiB or TiB) the amount of logical disk storage created on each auto-grow operation.
|
|
growth_limit
string
|
Specifies that the autogrow operation is limited to the specified storage amount that sets the growth limit(in MiB, GiB or TiB).
|
|
growth_warning
string
|
Specifies that the threshold(in MiB, GiB or TiB) of used logical disk space when exceeded results in a warning alert.
|
|
high_availability
string
|
|
Specifies that the layout must support the failure of one port pair, one cage, or one magazine.
|
raid_type
string
|
|
Specifies the RAID type for the logical disk.
|
secure
boolean
|
|
Specifies whether the certificate needs to be validated while communicating.
|
set_size
integer
|
Specifies the set size in the number of chunklets.
|
|
state
string /
required
|
|
Whether the specified CPG should exist or not.
|
storage_system_ip
string /
required
|
The storage system IP address.
|
|
storage_system_password
string /
required
|
The storage system password.
|
|
storage_system_username
string /
required
|
The storage system user name.
|
Notes
Note
- check_mode not supported
Examples
- name: Create CPG sample_cpg ss_3par_cpg: storage_system_ip: 10.10.10.1 storage_system_username: username storage_system_password: password state: present cpg_name: sample_cpg domain: sample_domain growth_increment: 32000 MiB growth_limit: 64000 MiB growth_warning: 48000 MiB raid_type: R6 set_size: 8 high_availability: MAG disk_type: FC secure: no - name: Delete CPG sample_cpg ss_3par_cpg: storage_system_ip: 10.10.10.1 storage_system_username: username storage_system_password: password state: absent cpg_name: sample_cpg secure: no
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Farhan Nomani (@farhan7500)
- Gautham P Hegde (@gautamphegde)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ss_3par_cpg_module.html