vyos_lag_interfaces – Manages attributes of link aggregation groups on VyOS network devices
New in version 2.9.
Synopsis
- This module manages attributes of link aggregation groups on VyOS network devices.
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
config
list
|
A list of link aggregation group configurations.
|
|||
arp_monitor
dictionary
|
ARP Link monitoring parameters.
|
|||
interval
integer
|
ARP link monitoring frequency in milliseconds.
|
|||
target
list
|
IP address to use for ARP monitoring.
|
|||
hash_policy
string
|
|
LAG or bonding transmit hash policy.
|
||
members
list
|
List of member interfaces for the LAG (bond).
|
|||
member
string
|
Name of the member interface.
|
|||
mode
string
|
|
LAG or bond mode.
|
||
name
string /
required
|
Name of the link aggregation group (LAG) or bond.
|
|||
primary
string
|
Primary device interfaces for the LAG (bond).
|
|||
state
string
|
|
The state of the configuration after module completion.
|
Notes
Note
- Tested against VyOS 1.1.8 (helium).
- This module works with connection
network_cli
. See the VyOS OS Platform Options.
Examples
# Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 # - name: Merge provided configuration with device configuration vyos_lag_interfaces: config: - name: bond2 mode: active-backup members: - member: eth2 - member: eth1 hash_policy: layer2 primary: eth2 - name: 'bond3' mode: 'active-backup' hash_policy: 'layer2+3' members: - member: eth3 primary: 'eth3' state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # "commands": [ # "set interfaces bonding bond2 hash-policy 'layer2'", # "set interfaces bonding bond2 mode 'active-backup'", # "set interfaces ethernet eth2 bond-group bond2", # "set interfaces ethernet eth1 bond-group bond2", # "set interfaces bonding bond2 primary 'eth2'", # "set interfaces bonding bond3 hash-policy 'layer2+3'", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth3 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ] # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Replace device configurations of listed LAGs with provided configurations vyos_lag_interfaces: config: - name: bond3 mode: '802.3ad' hash_policy: 'layer2' members: - member: eth3 state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # "commands": [ # "delete interfaces bonding bond3 primary", # "set interfaces bonding bond3 hash-policy 'layer2'", # "set interfaces bonding bond3 mode '802.3ad'" # ], # # "after": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode '802.3ad' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Overrides all device configuration with provided configuration vyos_lag_interfaces: config: - name: bond3 mode: active-backup members: - member: eth1 - member: eth2 - member: eth3 primary: eth3 hash_policy: layer2 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth3" # } # ], # "mode": "802.3ad", # "name": "bond3" # } # ], # # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "set interfaces bonding bond3 mode 'active-backup'", # "set interfaces ethernet eth1 bond-group bond3", # "set interfaces ethernet eth2 bond-group bond3", # "set interfaces bonding bond3 primary 'eth3'" # ], # # "after": [ # { # "name": "bond2" # }, # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # }, # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # # # After state # ------------ # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3 hash-policy 'layer2' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond3' # set interfaces ethernet eth2 bond-group 'bond3' # set interfaces ethernet eth3 bond-group 'bond3' # Using deleted # # Before state # ------------- # # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 hash-policy 'layer2' # set interfaces bonding bond2 mode 'active-backup' # set interfaces bonding bond2 primary 'eth2' # set interfaces bonding bond3 hash-policy 'layer2+3' # set interfaces bonding bond3 mode 'active-backup' # set interfaces bonding bond3 primary 'eth3' # set interfaces ethernet eth1 bond-group 'bond2' # set interfaces ethernet eth2 bond-group 'bond2' # set interfaces ethernet eth3 bond-group 'bond3' # - name: Delete LAG attributes of given interfaces (Note This won't delete the interface itself) vyos_lag_interfaces: config: - name: bond2 - name: bond3 state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # # "before": [ # { # "hash_policy": "layer2", # "members": [ # { # "member": "eth1" # }, # { # "member": "eth2" # } # ], # "mode": "active-backup", # "name": "bond2", # "primary": "eth2" # }, # { # "hash_policy": "layer2+3", # "members": [ # { # "member": "eth3" # } # ], # "mode": "active-backup", # "name": "bond3", # "primary": "eth3" # } # ], # "commands": [ # "delete interfaces bonding bond2 hash-policy", # "delete interfaces ethernet eth1 bond-group bond2", # "delete interfaces ethernet eth2 bond-group bond2", # "delete interfaces bonding bond2 mode", # "delete interfaces bonding bond2 primary", # "delete interfaces bonding bond3 hash-policy", # "delete interfaces ethernet eth3 bond-group bond3", # "delete interfaces bonding bond3 mode", # "delete interfaces bonding bond3 primary" # ], # # "after": [ # { # "name": "bond2" # }, # { # "name": "bond3" # } # ], # # After state # ------------ # vyos@vyos:~$ show configuration commands | grep bond # set interfaces bonding bond2 # set interfaces bonding bond3
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after
list
|
when changed |
The configuration as structured data after module completion.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
before
list
|
always |
The configuration as structured data prior to module invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
commands
list
|
always |
The set of commands pushed to the remote device.
Sample:
['set interfaces bonding bond2', 'set interfaces bonding bond2 hash-policy layer2']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Rohit Thakur (@rohitthakur2590)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_lag_interfaces_module.html