vyos_lldp_interfaces – Manages attributes of lldp interfaces on VyOS devices
New in version 2.9.
Synopsis
- This module manages attributes of lldp interfaces on VyOS network devices.
Parameters
Parameter | Choices/Defaults | Comments | ||||
---|---|---|---|---|---|---|
config
list
|
A list of lldp interfaces configurations.
|
|||||
enable
boolean
|
|
to disable lldp on the interface.
|
||||
location
dictionary
|
LLDP-MED location data.
|
|||||
civic_based
dictionary
|
Civic-based location data.
|
|||||
ca_info
list
|
LLDP-MED address info
|
|||||
ca_type
integer /
required
|
LLDP-MED Civic Address type.
|
|||||
ca_value
string /
required
|
LLDP-MED Civic Address value.
|
|||||
country_code
string /
required
|
Country Code
|
|||||
coordinate_based
dictionary
|
Coordinate-based location.
|
|||||
altitude
integer
|
Altitude in meters.
|
|||||
datum
string
|
|
Coordinate datum type.
|
||||
latitude
string /
required
|
Latitude.
|
|||||
longitude
string /
required
|
Longitude.
|
|||||
elin
string
|
Emergency Call Service ELIN number (between 10-25 numbers).
|
|||||
name
string /
required
|
Name of the lldp interface.
|
|||||
state
string
|
|
The state of the configuration after module completion.
|
Notes
Note
- Tested against VyOS 1.1.8 (helium).
- This module works with connection
network_cli
. See the VyOS OS Platform Options.
Examples
# Using merged # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # - name: Merge provided configuration with device configuration vyos_lldp_interfaces: config: - name: 'eth1' location: civic_based: country_code: 'US' ca_info: - ca_type: 0 ca_value: 'ENGLISH' - name: 'eth2' location: coordinate_based: altitude: 2200 datum: 'WGS84' longitude: '222.267255W' latitude: '33.524449N' state: merged # # # ------------------------- # Module Execution Result # ------------------------- # # before": [] # # "commands": [ # "set service lldp interface eth1 location civic-based country-code 'US'", # "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'", # "set service lldp interface eth1", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth2 location coordinate-based altitude '2200'", # "set service lldp interface eth2 location coordinate-based datum 'WGS84'", # "set service lldp interface eth2 location coordinate-based longitude '222.267255W'", # "set service lldp interface eth2" # # "after": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "civic_based": { # "ca_info": [ # { # "ca_type": 0, # "ca_value": "ENGLISH" # } # ], # "country_code": "US" # } # }, # "name": "eth1" # } # ], # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH' # set service lldp interface eth1 location civic-based country-code 'US' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # Using replaced # # Before state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH' # set service lldp interface eth1 location civic-based country-code 'US' # set service lldp interface eth2 location coordinate-based altitude '2200' # set service lldp interface eth2 location coordinate-based datum 'WGS84' # set service lldp interface eth2 location coordinate-based latitude '33.524449N' # set service lldp interface eth2 location coordinate-based longitude '222.267255W' # - name: Replace device configurations of listed LLDP interfaces with provided configurations vyos_lldp_interfaces: config: - name: 'eth2' location: civic_based: country_code: 'US' ca_info: - ca_type: 0 ca_value: 'ENGLISH' - name: 'eth1' location: coordinate_based: altitude: 2200 datum: 'WGS84' longitude: '222.267255W' latitude: '33.524449N' state: replaced # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth2" # }, # { # "location": { # "civic_based": { # "ca_info": [ # { # "ca_type": 0, # "ca_value": "ENGLISH" # } # ], # "country_code": "US" # } # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "set service lldp interface eth2 'disable'", # "set service lldp interface eth2 location civic-based country-code 'US'", # "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'", # "delete service lldp interface eth1 location", # "set service lldp interface eth1 'disable'", # "set service lldp interface eth1 location coordinate-based latitude '33.524449N'", # "set service lldp interface eth1 location coordinate-based altitude '2200'", # "set service lldp interface eth1 location coordinate-based datum 'WGS84'", # "set service lldp interface eth1 location coordinate-based longitude '222.267255W'" # ] # # "after": [ # { # "location": { # "civic_based": { # "ca_info": [ # { # "ca_type": 0, # "ca_value": "ENGLISH" # } # ], # "country_code": "US" # } # }, # "name": "eth2" # }, # { # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # ] # # After state: # ------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH' # set service lldp interface eth2 location civic-based country-code 'US' # Using overridden # # Before state # -------------- # # vyos@vyos:~$ show configuration commands | grep lldp # set service lldp interface eth1 'disable' # set service lldp interface eth1 location coordinate-based altitude '2200' # set service lldp interface eth1 location coordinate-based datum 'WGS84' # set service lldp interface eth1 location coordinate-based latitude '33.524449N' # set service lldp interface eth1 location coordinate-based longitude '222.267255W' # set service lldp interface eth2 'disable' # set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH' # set service lldp interface eth2 location civic-based country-code 'US' # - name: Overrides all device configuration with provided configuration vyos_lag_interfaces: config: - name: 'eth2' location: elin: 0000000911 state: overridden # # # ------------------------- # Module Execution Result # ------------------------- # # "before": [ # { # "enable": false, # "location": { # "civic_based": { # "ca_info": [ # { # "ca_type": 0, # "ca_value": "ENGLISH" # } # ], # "country_code": "US" # } # }, # "name": "eth2" # }, # { # "enable": false, # "location": { # "coordinate_based": { # "altitude": 2200, # "datum": "WGS84", # "latitude": "33.524449N", # "longitude": "222.267255W" # } # }, # "name": "eth1" # } # ] # # "commands": [ # "delete service lldp interface eth2 location", # "delete service lldp interface eth2 disable", # "set service lldp interface eth2 location elin 0000000911" # # # "after": [ # { # "location": { # "elin": 0000000911 # }, # "name": "eth2" # } # ] # # # After state # ------------ # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # Using deleted # # Before state # ------------- # # vyos@vyos# run show configuration commands | grep lldp # set service lldp interface eth2 location elin '0000000911' # - name: Delete lldp interface attributes of given interfaces. vyos_lag_interfaces: config: - name: 'eth2' state: deleted # # # ------------------------ # Module Execution Results # ------------------------ # "before": [ { "location": { "elin": 0000000911 }, "name": "eth2" } ] # "commands": [ # "commands": [ # "delete service lldp interface eth2" # ] # # "after": [] # After state # ------------ # vyos@vyos# run show configuration commands | grep lldp # set service 'lldp'
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
after
list
|
when changed |
The configuration as structured data after module completion.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
before
list
|
always |
The configuration as structured data prior to module invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
commands
list
|
always |
The set of commands pushed to the remote device.
Sample:
["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Rohit Thakur (@rohitthakur2590)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_lldp_interfaces_module.html