edgeswitch_vlan – Manage VLANs on Ubiquiti Edgeswitch network devices

New in version 2.8.

Synopsis

This module provides declarative management of VLANs on Ubiquiti Edgeswitch network devices.

Parameters

Parameter	Choices/Defaults	Comments
aggregate -		List of VLANs definitions.
auto_exclude boolean	Choices: no yes	Each of the switch interfaces will be excluded from vlan_id unless defined in *_interfaces. This is a default setting for all switch interfaces.
auto_tag boolean	Choices: no yes	Each of the switch interfaces will be set to accept and transmit untagged frames for vlan_id unless defined in *_interfaces. This is a default setting for all switch interfaces.
auto_untag boolean	Choices: no yes	Each of the switch interfaces will be set to accept untagged frames and transmit them tagged for vlan_id unless defined in *_interfaces. This is a default setting for all switch interfaces.
excluded_interfaces -		List of interfaces that should be excluded of the VLAN. Accept range of interfaces.
name -		Name of the VLAN.
purge boolean	Choices: no ← yes	Purge VLANs not defined in the aggregate parameter.
state -	Choices: present ← absent	action on the VLAN configuration.
tagged_interfaces -		List of interfaces that should accept and transmit tagged frames for the VLAN. Accept range of interfaces.
untagged_interfaces -		List of interfaces that should accept untagged frames and transmit them tagged for the VLAN. Accept range of interfaces.
vlan_id -		ID of the VLAN. Range 1-4093.

Notes

Note

Tested against edgeswitch 1.7.4
This module use native Ubiquiti vlan syntax and does not support switchport compatibility syntax. For clarity, it is strongly advised to not use both syntaxes on the same interface.
Edgeswitch does not support deleting or changing name of VLAN 1
As auto_tag, auto_untag and auto_exclude are a kind of default setting for all interfaces, they are mutually exclusive

Examples

- name: Create vlan
  edgeswitch_vlan:
    vlan_id: 100
    name: voice
    action: present

- name: Add interfaces to VLAN
  edgeswitch_vlan:
    vlan_id: 100
    tagged_interfaces:
      - 0/1
      - 0/4-0/6

- name: setup three vlans and delete the rest
  edgeswitch_vlan:
    purge: true
    aggregate:
      - { vlan_id: 1, name: default, auto_untag: true, excluded_interfaces: 0/45-0/48 }
      - { vlan_id: 100, name: voice, auto_tag: true }
      - { vlan_id: 200, name: video, auto_exclude: true, untagged_interfaces: 0/45-0/48, tagged_interfaces: 0/49 }

- name: Delete vlan
  edgeswitch_vlan:
    vlan_id: 100
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	The list of configuration mode commands to send to the device Sample: ['vlan database', 'vlan 100', 'vlan name 100 "test vlan"', 'exit', 'interface 0/1', 'vlan pvid 50', 'vlan participation include 50,100', 'vlan tagging 100', 'vlan participation exclude 200', 'no vlan tagging 200']

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Frederic Bor (@f-bor)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/edgeswitch_vlan_module.html

Docs

Docs4dev

Title here