On this page
fortios_wireless_controller_hotspot20_hs_profile – Configure hotspot profile in Fortinet’s FortiOS and FortiGate
New in version 2.9.
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller_hotspot20 feature and hs_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.4
Requirements
The below requirements are needed on the host that executes this module.
- fortiosapi>=0.9.8
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
host
string
|
FortiOS or FortiGate IP address.
|
|||
https
boolean
|
|
Indicates if the requests towards FortiGate must use HTTPS protocol.
|
||
password
string
|
Default:
""
|
FortiOS or FortiGate password.
|
||
ssl_verify
boolean
|
|
Ensures FortiGate certificate must be verified by a proper CA.
|
||
state
string / required
|
|
Indicates whether to create or remove the object.
|
||
username
string
|
FortiOS or FortiGate username.
|
|||
vdom
string
|
Default:
"root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
||
wireless_controller_hotspot20_hs_profile
dictionary
|
Default:
null
|
Configure hotspot profile.
|
||
access_network_asra
string
|
|
Enable/disable additional step required for access (ASRA).
|
||
access_network_esr
string
|
|
Enable/disable emergency services reachable (ESR).
|
||
access_network_internet
string
|
|
Enable/disable connectivity to the Internet.
|
||
access_network_type
string
|
|
Access network type.
|
||
access_network_uesa
string
|
|
Enable/disable unauthenticated emergency service accessible (UESA).
|
||
anqp_domain_id
integer
|
ANQP Domain ID (0-65535).
|
|||
bss_transition
string
|
|
Enable/disable basic service set (BSS) transition Support.
|
||
conn_cap
string
|
Connection capability name. Source wireless-controller.hotspot20.h2qp-conn-capability.name.
|
|||
deauth_request_timeout
integer
|
Deauthentication request timeout (in seconds).
|
|||
dgaf
string
|
|
Enable/disable downstream group-addressed forwarding (DGAF).
|
||
domain_name
string
|
Domain name.
|
|||
gas_comeback_delay
integer
|
GAS comeback delay (0 or 100 - 4000 milliseconds).
|
|||
gas_fragmentation_limit
integer
|
GAS fragmentation limit (512 - 4096).
|
|||
hessid
string
|
Homogeneous extended service set identifier (HESSID).
|
|||
ip_addr_type
string
|
IP address type name. Source wireless-controller.hotspot20.anqp-ip-address-type.name.
|
|||
l2tif
string
|
|
Enable/disable Layer 2 traffic inspection and filtering.
|
||
nai_realm
string
|
NAI realm list name. Source wireless-controller.hotspot20.anqp-nai-realm.name.
|
|||
name
string / required
|
Hotspot profile name.
|
|||
network_auth
string
|
Network authentication name. Source wireless-controller.hotspot20.anqp-network-auth-type.name.
|
|||
oper_friendly_name
string
|
Operator friendly name. Source wireless-controller.hotspot20.h2qp-operator-name.name.
|
|||
osu_provider
list
|
Manually selected list of OSU provider(s).
|
|||
name
string / required
|
OSU provider name. Source wireless-controller.hotspot20.h2qp-osu-provider.name.
|
|||
osu_ssid
string
|
Online sign up (OSU) SSID.
|
|||
pame_bi
string
|
|
Enable/disable Pre-Association Message Exchange BSSID Independent (PAME-BI).
|
||
proxy_arp
string
|
|
Enable/disable Proxy ARP.
|
||
qos_map
string
|
QoS MAP set ID. Source wireless-controller.hotspot20.qos-map.name.
|
|||
roaming_consortium
string
|
Roaming consortium list name. Source wireless-controller.hotspot20.anqp-roaming-consortium.name.
|
|||
venue_group
string
|
|
Venue group.
|
||
venue_name
string
|
Venue name. Source wireless-controller.hotspot20.anqp-venue-name.name.
|
|||
venue_type
string
|
|
Venue type.
|
||
wan_metrics
string
|
WAN metric name. Source wireless-controller.hotspot20.h2qp-wan-metric.name.
|
|||
wnm_sleep_mode
string
|
|
Enable/disable wireless network management (WNM) sleep mode.
|
Notes
Note
- Requires fortiosapi library developed by Fortinet
- Run as a local_action in your playbook
Examples
- hosts: localhost
vars:
host: "192.168.122.40"
username: "admin"
password: ""
vdom: "root"
ssl_verify: "False"
tasks:
- name: Configure hotspot profile.
fortios_wireless_controller_hotspot20_hs_profile:
host: "{{ host }}"
username: "{{ username }}"
password: "{{ password }}"
vdom: "{{ vdom }}"
https: "False"
state: "present"
wireless_controller_hotspot20_hs_profile:
access_network_asra: "enable"
access_network_esr: "enable"
access_network_internet: "enable"
access_network_type: "private-network"
access_network_uesa: "enable"
anqp_domain_id: "9"
bss_transition: "enable"
conn_cap: "<your_own_value> (source wireless-controller.hotspot20.h2qp-conn-capability.name)"
deauth_request_timeout: "12"
dgaf: "enable"
domain_name: "<your_own_value>"
gas_comeback_delay: "15"
gas_fragmentation_limit: "16"
hessid: "<your_own_value>"
ip_addr_type: "<your_own_value> (source wireless-controller.hotspot20.anqp-ip-address-type.name)"
l2tif: "enable"
nai_realm: "<your_own_value> (source wireless-controller.hotspot20.anqp-nai-realm.name)"
name: "default_name_21"
network_auth: "<your_own_value> (source wireless-controller.hotspot20.anqp-network-auth-type.name)"
oper_friendly_name: "<your_own_value> (source wireless-controller.hotspot20.h2qp-operator-name.name)"
osu_provider:
-
name: "default_name_25 (source wireless-controller.hotspot20.h2qp-osu-provider.name)"
osu_ssid: "<your_own_value>"
pame_bi: "disable"
proxy_arp: "enable"
qos_map: "<your_own_value> (source wireless-controller.hotspot20.qos-map.name)"
roaming_consortium: "<your_own_value> (source wireless-controller.hotspot20.anqp-roaming-consortium.name)"
venue_group: "unspecified"
venue_name: "<your_own_value> (source wireless-controller.hotspot20.anqp-venue-name.name)"
venue_type: "unspecified"
wan_metrics: "<your_own_value> (source wireless-controller.hotspot20.h2qp-wan-metric.name)"
wnm_sleep_mode: "enable"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
status
string
|
always |
Indication of the operation's result
Sample:
success
|
vdom
string
|
always |
Virtual domain used
Sample:
root
|
version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/fortios_wireless_controller_hotspot20_hs_profile_module.html