iosxr_lldp_interfaces – Manage Link Layer Discovery Protocol (LLDP) attributes of interfaces on IOS-XR devices
New in version 2.9.
Synopsis
- This module manages Link Layer Discovery Protocol (LLDP) attributes of interfaces on IOS-XR devices.
Parameters
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| config
list / elements=dictionary
|
A dictionary of LLDP interfaces options.
|
|||
| destination
dictionary
|
Specifies LLDP destination configuration on the interface.
|
|||
| mac_address
string
|
|
Specifies the LLDP destination mac address on the interface.
|
||
| name
string
|
Name/Identifier of the interface or Ether-Bundle.
|
|||
| receive
boolean
|
|
Enable/disable LLDP RX on an interface.
|
||
| transmit
boolean
|
|
Enable/disable LLDP TX on an interface.
|
||
| state
string
|
|
The state of the configuration after module completion.
|
||
Notes
Note
- Tested against IOS-XR 6.1.3.
- This module works with connection
network_cli. See the IOS-XR Platform Options.
Examples
# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:40:23.104 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
- name: Merge provided configuration with running configuration
iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
destination:
mac_address: ieee-nearest-non-tmpr-bridge
transmit: False
- name: GigabitEthernet0/0/0/2
destination:
mac_address: ieee-nearest-bridge
receive: False
state: merged
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
# "commands": [
# "interface GigabitEthernet0/0/0/2",
# "lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "lldp transmit disable",
# "interface GigabitEthernet0/0/0/1",
# "lldp receive disable",
# "lldp destination mac-address ieee-nearest-bridge"
# ]
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
# Using replaced
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 12:49:51.517 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: Replace existing LLDP configurations of specified interfaces with provided configuration
iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
destination:
mac_address: ieee-nearest-non-tmpr-bridge
state: replaced
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# "commands": [
# "interface GigabitEthernet0/0/0/1",
# "no lldp receive disable",
# "lldp destination mac-address ieee-nearest-non-tmpr-bridge"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:02:57.062 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
# Using overridden
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:15:40.465 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: Override the LLDP configurations of all the interfaces with provided configurations
iosxr_lldp_interfaces:
config:
- name: GigabitEthernet0/0/0/1
transmit: False
state: overridden
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
# "commands": [
# "interface GigabitEthernet0/0/0/2",
# "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "no lldp transmit disable",
# "interface GigabitEthernet0/0/0/1",
# "no lldp destination mac-address ieee-nearest-bridge",
# "no lldp receive disable",
# "lldp transmit disable"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1",
# "transmit": false
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:22:25.604 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# transmit disable
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
# Using deleted
#
#
# -------------
# Before state
# -------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:26:21.498 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# lldp
# receive disable
# destination mac-address
# ieee-nearest-bridge
# !
# !
# !
# interface preconfigure GigabitEthernet0/0/0/2
# lldp
# transmit disable
# destination mac-address
# ieee-nearest-non-tmpr-bridge
# !
# !
# !
#
#
- name: Delete LLDP configurations of all interfaces (Note - This won't delete the interfaces themselves)
iosxr_lldp_interfaces:
state: deleted
#
#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#
# "before": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-bridge"
# },
# "name": "GigabitEthernet0/0/0/1",
# "receive": false
# },
# {
# "destination": {
# "mac_address": "ieee-nearest-non-tmpr-bridge"
# },
# "name": "GigabitEthernet0/0/0/2",
# "transmit": false
# }
# ]
#
#
# "commands": [
# "interface GigabitEthernet0/0/0/1",
# "no lldp destination mac-address ieee-nearest-bridge",
# "no lldp receive disable",
# "interface GigabitEthernet0/0/0/2",
# "no lldp destination mac-address ieee-nearest-non-tmpr-bridge",
# "no lldp transmit disable"
# ]
#
#
# "after": [
# {
# "name": "TenGigE0/0/0/0"
# },
# {
# "name": "GigabitEthernet0/0/0/1"
# },
# {
# "name": "GigabitEthernet0/0/0/2"
# }
# ]
#
#
# ------------
# After state
# ------------
#
#
# RP/0/RP0/CPU0:ios#sh run int
# Mon Aug 12 13:30:14.618 UTC
# interface TenGigE0/0/0/0
# ipv4 address 192.0.2.11 255.255.255.192
# !
# interface preconfigure GigabitEthernet0/0/0/1
# !
# interface preconfigure GigabitEthernet0/0/0/2
# !
#
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after
list
|
when changed |
The configuration as structured data after module completion.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| before
list
|
always |
The configuration as structured data prior to module invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| commands
list
|
always |
The set of commands pushed to the remote device.
Sample:
['interface GigabitEthernet0/0/0/1', 'lldp destination mac-address ieee-nearest-non-tmpr-bridge', 'no lldp transmit disable']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Nilashish Chakraborty (@nilashishc)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/iosxr_lldp_interfaces_module.html