vyos_l3_interfaces – Manages L3 interface attributes of VyOS network devices
New in version 2.9.
Synopsis
- This module manages the L3 interface attributes on VyOS network devices.
Parameters
| Parameter | Choices/Defaults | Comments | |||
|---|---|---|---|---|---|
| config
list / elements=dictionary
|
The provided L3 interfaces configuration.
|
||||
| ipv4
list / elements=dictionary
|
List of IPv4 addresses of the interface.
|
||||
| address
string
|
IPv4 address of the interface.
|
||||
| ipv6
list / elements=dictionary
|
List of IPv6 addresses of the interface.
|
||||
| address
string
|
IPv6 address of the interface.
|
||||
| name
string / required
|
Full name of the interface, e.g. eth0, eth1.
|
||||
| vifs
list / elements=dictionary
|
Virtual sub-interfaces L3 configurations.
|
||||
| ipv4
list / elements=dictionary
|
List of IPv4 addresses of the virtual interface.
|
||||
| address
string
|
IPv4 address of the virtual interface.
|
||||
| ipv6
list / elements=dictionary
|
List of IPv6 addresses of the virtual interface.
|
||||
| address
string
|
IPv6 address of the virtual interface.
|
||||
| vlan_id
integer
|
Identifier for the virtual sub-interface.
|
||||
| state
string
|
|
The state of the configuration after module completion.
|
|||
Notes
Note
- Tested against VyOS 1.1.8 (helium).
- This module works with connection
network_cli. See the VyOS OS Platform Options.
Examples
# Using merged
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102
- name: Merge provided configuration with device configuration
vyos_l3_interfaces:
config:
- name: eth2
ipv4:
- address: 192.0.2.10/28
- address: 198.51.100.40/27
ipv6:
- address: 2001:db8:100::2/32
- address: 2001:db8:400::10/32
- name: eth3
ipv4:
- address: 203.0.113.65/26
vifs:
- vlan_id: 101
ipv4:
- address: 192.0.2.71/28
- address: 198.51.100.131/25
- vlan_id: 102
ipv6:
- address: 2001:db8:1000::5/38
- address: 2001:db8:1400::3/38
state: merged
# After state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 address '192.0.2.10/28'
# set interfaces ethernet eth2 address '198.51.100.40/27'
# set interfaces ethernet eth2 address '2001:db8:100::2/32'
# set interfaces ethernet eth2 address '2001:db8:400::10/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '203.0.113.65/26'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '192.0.2.71/28'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1000::5/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1400::3/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
# Using replaced
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
#
- name: Replace device configurations of listed interfaces with provided configurations
vyos_l3_interfaces:
config:
- name: eth2
ipv4:
- address: 192.0.2.10/24
- name: eth3
ipv6:
- address: 2001:db8::11/32
state: replaced
# After state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 address '2001:db8::11/32'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102
# Using overridden
#
# Before state
# --------------
#
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
- name: Overrides all device configuration with provided configuration
vyos_l3_interfaces:
config:
- name: eth0
ipv4:
- address: dhcp
ipv6:
- address: dhcpv6
state: overridden
# After state
# ------------
#
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 address 'dhcpv6'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102
# Using deleted
#
# Before state
# -------------
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
- name: Delete L3 attributes of given interfaces (Note - This won't delete the interface itself)
vyos_l3_interfaces:
config:
- name: eth1
- name: eth2
- name: eth3
state: deleted
# After state
# ------------
# vyos@vyos-appliance:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
# set interfaces ethernet eth1 smp_affinity 'auto'
# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
# set interfaces ethernet eth2 smp_affinity 'auto'
# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
# set interfaces ethernet eth3 smp_affinity 'auto'
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after
list
|
when changed |
The configuration as structured data after module completion.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| before
list
|
always |
The configuration as structured data prior to module invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| commands
list
|
always |
The set of commands pushed to the remote device.
Sample:
['set interfaces ethernet eth1 192.0.2.14/2', 'set interfaces ethernet eth3 vif 101 address 198.51.100.130/25']
|
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Nilashish Chakraborty (@NilashishC)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/vyos_l3_interfaces_module.html