arista.eos.eos_ospf_interfaces – OSPF Interfaces Resource Module.
Note
This plugin is part of the arista.eos collection (version 2.2.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install arista.eos.
To use it in a playbook, specify: arista.eos.eos_ospf_interfaces.
New in version 1.1.0: of arista.eos
Synopsis
- This module manages OSPF configuration of interfaces on devices running Arista EOS.
Note
This module has a corresponding action plugin.
Parameters
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config
list / elements=dictionary
|
A list of OSPF configuration for interfaces.
|
|||||
| address_family
list / elements=dictionary
|
OSPF settings on the interfaces in address-family context.
|
|||||
| afi
string / required
|
|
Address Family Identifier (AFI) for OSPF settings on the interfaces.
|
||||
| area
dictionary
|
Area associated with interface.
Valid only when afi = ipv4.
|
|||||
| area_id
string / required
|
Area ID as a decimal or IP address format.
|
|||||
| authentication_key
dictionary
|
Configure the authentication key for the interface.
Valid only when afi = ipv4.
|
|||||
| encryption
string
|
0 Specifies an UNENCRYPTED authentication key will follow.
7 Specifies a proprietry encryption type.`
|
|||||
| key
string
|
password (up to 8 chars).
|
|||||
| authentication_v2
dictionary
|
Authentication settings on the interface.
Valid only when afi = ipv4.
|
|||||
| message_digest
boolean
|
|
Use message-digest authentication.
|
||||
| set
boolean
|
|
Enable authentication on the interface.
|
||||
| authentication_v3
dictionary
|
Authentication settings on the interface.
Valid only when afi = ipv6.
|
|||||
| algorithm
string
|
|
Encryption alsgorithm.
|
||||
| key
string
|
128 bit MD5 key or 140 bit SHA1 key.
|
|||||
| keytype
string
|
Specifies if an unencrypted/hidden follows.
0 denotes unencrypted key.
7 denotes hidden key.
|
|||||
| passphrase
string
|
Passphrase String for deriving keys for authentication and encryption.
|
|||||
| spi
integer
|
IPsec Security Parameter Index.
|
|||||
| bfd
boolean
|
|
Enable BFD.
|
||||
| cost
integer
|
metric associated with interface.
|
|||||
| dead_interval
integer
|
Time interval to detect a dead router.
|
|||||
| encryption_v3
dictionary
|
Authentication settings on the interface.
Valid only when afi = ipv6.
|
|||||
| algorithm
string
|
|
algorithm.
|
||||
| encryption
string
|
|
encryption type.
|
||||
| key
string
|
key
|
|||||
| keytype
string
|
Specifies if an unencrypted/hidden follows.
0 denotes unencrypted key.
7 denotes hidden key.
|
|||||
| passphrase
string
|
Passphrase String for deriving keys for authentication and encryption.
|
|||||
| spi
integer
|
IPsec Security Parameter Index.
|
|||||
| hello_interval
integer
|
Timer interval between transmission of hello packets.
|
|||||
| ip_params
list / elements=dictionary
|
Specify parameters for IPv4/IPv6.
Valid only when afi = ipv6.
|
|||||
| afi
string / required
|
|
Address Family Identifier (AFI) for OSPF settings on the interfaces.
|
||||
| area
dictionary
|
Area associated with interface.
Valid only when afi = ipv4.
|
|||||
| area_id
string / required
|
Area ID as a decimal or IP address format.
|
|||||
| bfd
boolean
|
|
Enable BFD.
|
||||
| cost
integer
|
metric associated with interface.
|
|||||
| dead_interval
integer
|
Time interval to detect a dead router.
|
|||||
| hello_interval
integer
|
Timer interval between transmission of hello packets.
|
|||||
| mtu_ignore
boolean
|
|
if True, Disable MTU check for Database Description packets.
|
||||
| network
string
|
Interface type.
|
|||||
| passive_interface
boolean
|
|
Suppress routing updates in an interface.
|
||||
| priority
integer
|
Interface priority.
|
|||||
| retransmit_interval
integer
|
LSA retransmission interval.
|
|||||
| transmit_delay
integer
|
LSA transmission delay.
|
|||||
| message_digest_key
dictionary
|
Message digest authentication password (key) settings.
|
|||||
| encryption
string
|
0 Specifies an UNENCRYPTED ospf password (key) will follow.
7 Specifies a proprietry encryption type.
|
|||||
| key
string
|
Authentication key (upto 16 chars).
|
|||||
| key_id
integer
|
Key ID.
|
|||||
| mtu_ignore
boolean
|
|
if True, Disable MTU check for Database Description packets.
|
||||
| network
string
|
Interface type.
|
|||||
| passive_interface
boolean
|
|
Suppress routing updates in an interface.
Valid only when afi = ipv6.
|
||||
| priority
integer
|
Interface priority.
|
|||||
| retransmit_interval
integer
|
LSA retransmission interval.
|
|||||
| shutdown
boolean
|
|
Shutdown OSPF on this interface.
|
||||
| transmit_delay
integer
|
LSA transmission delay.
|
|||||
| name
string
|
Name/Identifier of the interface.
|
|||||
| running_config
string
|
This option is used only with state parsed.
The value of this option should be the output received from the EOS device by executing the command show running-config | section interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
|
|||||
| state
string
|
|
The state the configuration should be left in.
|
||||
Examples
# Using merged
# Before state
# veos(config)#show running-config | section interface | ospf
# veos(config)#
- name: Merge provided configuration with device configuration
arista.eos.eos_ospf_interfaces:
config:
- name: "Vlan1"
address_family:
- afi: "ipv4"
area:
area_id: "0.0.0.50"
cost: 500
mtu_ignore: True
- afi: "ipv6"
dead_interval: 44
ip_params:
- afi: "ipv6"
mtu_ignore: True
network: "point-to-point"
state: merged
# After State
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ip ospf cost 500
# ip ospf mtu-ignore
# ip ospf area 0.0.0.50
# ospfv3 dead-interval 44
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# veos(config)#
#
#
# Module Execution:
#
# "after": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.50"
# },
# "cost": 500,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "dead_interval": 44,
# "ip_params": [
# {
# "afi": "ipv6",
# "mtu_ignore": True,
# "network": "point-to-point"
# }
# ]
# }
# ],
# "name": "Vlan1"
# }
# ],
# "before": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# }
# ],
# "changed": True,
# "commands": [
# "interface Vlan1",
# "ip ospf area 0.0.0.50",
# "ip ospf cost 500",
# "ip ospf mtu-ignore",
# "ospfv3 dead-interval 44",
# "ospfv3 ipv6 mtu-ignore",
# "ospfv3 ipv6 network point-to-point"
# ],
#
# Using replaced
#---------------
# Before State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ip ospf cost 500
# ip ospf dead-interval 29
# ip ospf hello-interval 66
# ip ospf mtu-ignore
# ip ospf area 0.0.0.50
# ospfv3 cost 106
# ospfv3 hello-interval 77
# ospfv3 dead-interval 44
# ospfv3 transmit-delay 100
# ospfv3 ipv4 priority 45
# ospfv3 ipv4 area 0.0.0.5
# ospfv3 ipv6 passive-interface
# ospfv3 ipv6 retransmit-interval 115
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
# veos(config)#
- name: Replace device configuration with provided configuration
arista.eos.eos_ospf_interfaces:
config:
- name: "Vlan1"
address_family:
- afi: "ipv6"
cost: 44
bfd: True
ip_params:
- afi: "ipv6"
mtu_ignore: True
network: "point-to-point"
dead_interval: 56
state: replaced
# After State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ospfv3 bfd
# ospfv3 cost 44
# no ospfv3 ipv6 passive-interface
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
# veos(config)#
#
# Module Execution:
#
# "after": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "bfd": True,
# "cost": 44,
# "ip_params": [
# {
# "afi": "ipv6",
# "mtu_ignore": True,
# "network": "point-to-point"
# }
# ]
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
# "before": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.50"
# },
# "cost": 500,
# "dead_interval": 29,
# "hello_interval": 66,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "cost": 106,
# "dead_interval": 44,
# "hello_interval": 77,
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.5"
# },
# "priority": 45
# },
# {
# "afi": "ipv6",
# "mtu_ignore": True,
# "network": "point-to-point",
# "passive_interface": True,
# "retransmit_interval": 115
# }
# ],
# "transmit_delay": 100
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
# "changed": True,
# "commands": [
# "interface Vlan1",
# "no ip ospf cost 500",
# "no ip ospf dead-interval 29",
# "no ip ospf hello-interval 66",
# "no ip ospf mtu-ignore",
# "no ip ospf area 0.0.0.50",
# "ospfv3 cost 44",
# "ospfv3 bfd",
# "ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==",
# "no ospfv3 ipv4 priority 45",
# "no ospfv3 ipv4 area 0.0.0.5",
# "ospfv3 ipv6 dead-interval 56",
# "no ospfv3 ipv6 passive-interface",
# "no ospfv3 ipv6 retransmit-interval 115",
# "no ospfv3 hello-interval 77",
# "no ospfv3 dead-interval 44",
# "no ospfv3 transmit-delay 100"
# ],
#
# Using overidden:
# ----------------
# Before State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ip ospf dead-interval 29
# ip ospf hello-interval 66
# ip ospf mtu-ignore
# ospfv3 bfd
# ospfv3 cost 106
# ospfv3 hello-interval 77
# ospfv3 transmit-delay 100
# ospfv3 ipv4 priority 45
# ospfv3 ipv4 area 0.0.0.5
# ospfv3 ipv6 passive-interface
# ospfv3 ipv6 dead-interval 56
# ospfv3 ipv6 retransmit-interval 115
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
# veos(config)#
- name: Override device configuration with provided configuration
arista.eos.eos_ospf_interfaces:
config:
- name: "Vlan1"
address_family:
- afi: "ipv6"
cost: 44
bfd: True
ip_params:
- afi: "ipv6"
mtu_ignore: True
network: "point-to-point"
dead_interval: 56
state: overridden
# After State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ospfv3 bfd
# ospfv3 cost 44
# no ospfv3 ipv6 passive-interface
# ospfv3 ipv6 dead-interval 56
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# veos(config)#
#
#
# Module Execution:
#
# "after": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "bfd": True,
# "cost": 44,
# "ip_params": [
# {
# "afi": "ipv6",
# "dead_interval": 56,
# "mtu_ignore": True,
# "network": "point-to-point"
# }
# ]
# }
# ],
# "name": "Vlan1"
# },
# {
# "name": "Vlan2"
# }
# ],
# "before": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "dead_interval": 29,
# "hello_interval": 66,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "bfd": True,
# "cost": 106,
# "hello_interval": 77,
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.5"
# },
# "priority": 45
# },
# {
# "afi": "ipv6",
# "dead_interval": 56,
# "mtu_ignore": True,
# "network": "point-to-point",
# "passive_interface": True,
# "retransmit_interval": 115
# }
# ],
# "transmit_delay": 100
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
# "changed": True,
# "commands": [
# "interface Vlan2",
# "no ospfv3 ipv4 hello-interval 45",
# "no ospfv3 ipv4 retransmit-interval 100",
# "no ospfv3 ipv4 area 0.0.0.6",
# "interface Vlan1",
# "no ip ospf dead-interval 29",
# "no ip ospf hello-interval 66",
# "no ip ospf mtu-ignore",
# "ospfv3 cost 44",
# "ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==",
# "no ospfv3 ipv4 priority 45",
# "no ospfv3 ipv4 area 0.0.0.5",
# "no ospfv3 ipv6 passive-interface",
# "no ospfv3 ipv6 retransmit-interval 115",
# "no ospfv3 hello-interval 77",
# "no ospfv3 transmit-delay 100"
# ],
#
# Using deleted:
#--------------
# before State:
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
# ip ospf dead-interval 29
# ip ospf hello-interval 66
# ip ospf mtu-ignore
# ospfv3 bfd
# ospfv3 cost 106
# ospfv3 hello-interval 77
# ospfv3 transmit-delay 100
# ospfv3 ipv4 priority 45
# ospfv3 ipv4 area 0.0.0.5
# ospfv3 ipv6 passive-interface
# ospfv3 ipv6 dead-interval 56
# ospfv3 ipv6 retransmit-interval 115
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
# veos(config)#
- name: Delete device configuration
arista.eos.eos_ospf_interfaces:
config:
- name: "Vlan1"
state: deleted
# After State:
# veos#show running-config | section interface | ospf
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
#
# Module Execution:
#
# "after": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
# "before": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "dead_interval": 29,
# "hello_interval": 66,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "bfd": True,
# "cost": 106,
# "hello_interval": 77,
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.5"
# },
# "priority": 45
# },
# {
# "afi": "ipv6",
# "dead_interval": 56,
# "mtu_ignore": True,
# "network": "point-to-point",
# "passive_interface": True,
# "retransmit_interval": 115
# }
# ],
# "transmit_delay": 100
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
# "changed": True,
# "commands": [
# "interface Vlan1",
# "no ip ospf dead-interval 29",
# "no ip ospf hello-interval 66",
# "no ip ospf mtu-ignore",
# "no ospfv3 bfd",
# "no ospfv3 cost 106",
# "no ospfv3 hello-interval 77",
# "no ospfv3 transmit-delay 100",
# "no ospfv3 ipv4 priority 45",
# "no ospfv3 ipv4 area 0.0.0.5",
# "no ospfv3 ipv6 passive-interface",
# "no ospfv3 ipv6 dead-interval 56",
# "no ospfv3 ipv6 retransmit-interval 115",
# "no ospfv3 ipv6 network point-to-point",
# "no ospfv3 ipv6 mtu-ignore"
# ],
#
# Using parsed:
# ------------
# parsed.cfg:
# ----------
# interface Vlan1
# ip ospf dead-interval 29
# ip ospf hello-interval 66
# ip ospf mtu-ignore
# ip ospf cost 500
# ospfv3 bfd
# ospfv3 cost 106
# ospfv3 hello-interval 77
# ospfv3 transmit-delay 100
# ospfv3 ipv4 priority 45
# ospfv3 ipv4 area 0.0.0.5
# ospfv3 ipv6 passive-interface
# ospfv3 ipv6 dead-interval 56
# ospfv3 ipv6 retransmit-interval 115
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
#
- name: parse configs
arista.eos.eos_ospf_interfaces:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# Module Execution:
# "parsed": [
# {
# "address_family": [
# {
# "afi": "ipv4",
# "cost": 500,
# "dead_interval": 29,
# "hello_interval": 66,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "bfd": True,
# "cost": 106,
# "hello_interval": 77,
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.5"
# },
# "priority": 45
# },
# {
# "afi": "ipv6",
# "dead_interval": 56,
# "mtu_ignore": True,
# "network": "point-to-point",
# "passive_interface": True,
# "retransmit_interval": 115
# }
# ],
# "transmit_delay": 100
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ]
# Using gathered:
# Device COnfig:
# veos#show running-config | section interface | ospf
# interface Vlan1
# ip ospf cost 500
# ip ospf dead-interval 29
# ip ospf hello-interval 66
# ip ospf mtu-ignore
# ip ospf area 0.0.0.50
# ospfv3 cost 106
# ospfv3 hello-interval 77
# ospfv3 transmit-delay 100
# ospfv3 ipv4 priority 45
# ospfv3 ipv4 area 0.0.0.5
# ospfv3 ipv6 passive-interface
# ospfv3 ipv6 dead-interval 56
# ospfv3 ipv6 retransmit-interval 115
# ospfv3 ipv6 network point-to-point
# ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
# ospfv3 ipv4 hello-interval 45
# ospfv3 ipv4 retransmit-interval 100
# ospfv3 ipv4 area 0.0.0.6
# veos#
- name: gather configs
arista.eos.eos_ospf_interfaces:
state: gathered
# Module Execution:
#
# "gathered": [
# {
# "name": "Ethernet1"
# },
# {
# "name": "Ethernet2"
# },
# {
# "name": "Management1"
# },
# {
# "address_family": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.50"
# },
# "cost": 500,
# "dead_interval": 29,
# "hello_interval": 66,
# "mtu_ignore": True
# },
# {
# "afi": "ipv6",
# "cost": 106,
# "hello_interval": 77,
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.5"
# },
# "priority": 45
# },
# {
# "afi": "ipv6",
# "dead_interval": 56,
# "mtu_ignore": True,
# "network": "point-to-point",
# "passive_interface": True,
# "retransmit_interval": 115
# }
# ],
# "transmit_delay": 100
# }
# ],
# "name": "Vlan1"
# },
# {
# "address_family": [
# {
# "afi": "ipv6",
# "ip_params": [
# {
# "afi": "ipv4",
# "area": {
# "area_id": "0.0.0.6"
# },
# "hello_interval": 45,
# "retransmit_interval": 100
# }
# ]
# }
# ],
# "name": "Vlan2"
# }
# ],
#
# Using rendered:
# --------------
- name: Render provided configuration
arista.eos.eos_ospf_interfaces:
config:
- name: "Vlan1"
address_family:
- afi: "ipv4"
dead_interval: 29
mtu_ignore: True
hello_interval: 66
- afi: "ipv6"
hello_interval: 77
cost : 106
transmit_delay: 100
ip_params:
- afi: "ipv6"
retransmit_interval: 115
dead_interval: 56
passive_interface: True
- afi: "ipv4"
area:
area_id: "0.0.0.5"
priority: 45
- name: "Vlan2"
address_family:
- afi: "ipv6"
ip_params:
- afi: "ipv4"
area:
area_id: "0.0.0.6"
hello_interval: 45
retransmit_interval: 100
- afi: "ipv4"
message_digest_key:
key_id: 200
encryption: 7
key: "hkdfhtu=="
state: rendered
# Module Execution:
#
# "rendered": [
# "interface Vlan1",
# "ip ospf dead-interval 29",
# "ip ospf mtu-ignore",
# "ip ospf hello-interval 66",
# "ospfv3 hello-interval 77",
# "ospfv3 cost 106",
# "ospfv3 transmit-delay 100",
# "ospfv3 ipv4 area 0.0.0.5",
# "ospfv3 ipv4 priority 45",
# "ospfv3 ipv6 retransmit-interval 115",
# "ospfv3 ipv6 dead-interval 56",
# "ospfv3 ipv6 passive-interface",
# "interface Vlan2",
# "ip ospf message-digest-key 200 md5 7 hkdfhtu==",
# "ospfv3 ipv4 area 0.0.0.6",
# "ospfv3 ipv4 hello-interval 45",
# "ospfv3 ipv4 retransmit-interval 100"
# ]
#
Authors
- Gomathi Selvi Srinivasan (@GomathiselviS)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_ospf_interfaces_module.html