arista.eos.eos_ospfv2 – OSPFv2 resource module

Note

This plugin is part of the arista.eos collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospfv2.

New in version 1.0.0: of arista.eos

Synopsis

This module configures and manages the attributes of ospfv2 on Arista EOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter							Choices/Defaults	Comments
config dictionary								A list of configurations for ospfv2.
	processes list / elements=dictionary							A list of dictionary specifying the ospfv2 processes.
		adjacency dictionary						Configure adjacency options for OSPF instance.
			exchange_start dictionary					Configure exchange-start options for OSPF instance.
				threshold integer				Number of peers to bring up simultaneously.
		areas list / elements=dictionary						Specifies the configuration for OSPF areas
			area_id string					Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
			default_cost integer					Specify the cost for default summary route in stub/NSSA area.
			filter dictionary					Specify the filter for incoming summary LSAs.
				address string				IP address.
				prefix_list string				Specify list to filter for incoming LSAs.
				subnet_address string				IP address with mask length
				subnet_mask string				IP subnet mask
			not_so_stubby dictionary					Configures NSSA parameters.
				default_information_originate dictionary				Originate default Type 7 LSA.
					metric integer			Metric for default route.
					metric_type integer			Metric type for default route.
					nssa_only boolean		Choices: no yes	Limit default advertisement to this NSSA area.
				lsa boolean			Choices: no yes	lsa parameters
				no_summary boolean			Choices: no yes	Filter all type-3 LSAs in the nssa area.
				nssa_only boolean			Choices: no yes	Disable Type-7 LSA p-bit setting
				set boolean			Choices: no yes	Set config up to not-so-stubby
			nssa dictionary					Configures NSSA parameters.
				default_information_originate dictionary				Originate default Type 7 LSA.
					metric integer			Metric for default route.
					metric_type integer			Metric type for default route.
					nssa_only boolean		Choices: no yes	Limit default advertisement to this NSSA area.
				no_summary boolean			Choices: no yes	Filter all type-3 LSAs in the nssa area.
				nssa_only boolean			Choices: no yes	Disable Type-7 LSA p-bit setting
				set boolean			Choices: no yes	Set config up to nssa
			range dictionary					Configure route summarization.
				address string				IP address.
				advertise boolean			Choices: no yes	Enable Advertisement of the range.
				cost integer				Configures the metric.
				subnet_address string				IP address with mask length
				subnet_mask string				IP subnet mask
			stub dictionary					Stub area.
				no_summary boolean			Choices: no yes	If False , Filter all type-3 LSAs in the stub area.
				set boolean			Choices: no yes	When true sets the stub config alone.
		auto_cost dictionary						Set auto-cost.
			reference_bandwidth integer					reference bandwidth in megabits per sec.
		bfd dictionary						Enable BFD.
			all_interfaces boolean				Choices: no yes	Enable BFD on all interfaces.
		default_information dictionary						Control distribution of default information.
			always boolean				Choices: no yes	Always advertise default route.
			metric integer					Metric for default route.
			metric_type integer					Metric type for default route.
			originate boolean				Choices: no yes	Distribute a default route.
			route_map string					Specify which route-map to use.
		default_metric integer						Configure the default metric for redistributed routes
		distance dictionary						Specifies the administrative distance for routes.
			external integer					Routes external to the area
			inter_area integer					Routes from other areas
			intra_area integer					Routes with in an area
		distribute_list dictionary						Specifies the list of routes to be filtered.
			prefix_list string					prefix list to be filtered
			route_map string					route map to be filtered
		dn_bit_ignore boolean					Choices: no yes	If True, Disable dn-bit check for Type-3 LSAs in non-default VRFs.
		fips_restrictions string						Use FIPS compliant algorithms
		graceful_restart dictionary						Enable graceful restart mode.
			grace_period integer					Specify maximum time to wait for graceful-restart to complete.
			set boolean				Choices: no yes	When true sets the grace_fulrestart config alone.
		graceful_restart_helper boolean					Choices: no yes	If True, Enable graceful restart helper.
		log_adjacency_changes dictionary						To configure link-state changes and transitions of OSPFv2 neighbors.
			detail boolean				Choices: no yes	If true , configures the switch to log all link-state changes.
		max_lsa dictionary						Specifies the switch behavior on reaching max lsa count.
			count integer					maximum count of lsas.
			ignore_count integer					No. of times the switch can shut down temporarily on warning
			ignore_time integer					time in minutes, for which the switch shoud be shutdown on max-lsa warning
			reset_time integer					Time in minutes, after which the shutdown counter resets.
			threshold integer					percentage of <count> , when a warning should be raised.
			warning boolean				Choices: no yes	Only give warning message when limit is exceeded
		max_metric dictionary						Set maximum metric.
			router_lsa dictionary					Maximum metric in self-originated router-LSAs.
				external_lsa dictionary				Override external-lsa metric with max-metric value.
					max_metric_value integer			Set max metric value for external LSAs.
					set boolean		Choices: no yes	Set external-lsa attribute.
				include_stub boolean			Choices: no yes	Set maximum metric for stub links in router-LSAs.
				on_startup dictionary				Set maximum metric temporarily after reboot.
					wait_period integer			Wait period in seconds after startup.
				set boolean			Choices: no yes	Set router-lsa attribute.
				summary_lsa dictionary				Override summary-lsa metric with max-metric value.
					max_metric_value integer			Set max metric value for external LSAs.
					set boolean		Choices: no yes	Set external-lsa attribute.
		maximum_paths integer						Maximum number of next-hops in an ECMP route.
		mpls_ldp boolean					Choices: no yes	mpls ldp sync configuration.
		networks list / elements=dictionary						Configure routing for a network.
			area string					Configure OSPF area.
			mask string					Network Wildcard Mask.
			network_address string					Network Address.
			prefix string					Prefix.
		passive_interface dictionary						Include interface but without actively running OSPF.
			default boolean				Choices: no yes	If True, Set all interfaces to passive by default
			interface_list string					Interface range.
		point_to_point boolean					Choices: no yes	Configure Point-to-point specific features.
		process_id integer						ID of OSPFV2 process.
		redistribute list / elements=dictionary						Specifies the routes to be redistributed
			isis_level string					ISIS levels.
			route_map string					Specify which route map to use.
			routes string					Route types (BGP,isis,connected etc)
		retransmission_threshold integer						Configure threshold for retransmission.
		rfc1583compatibility boolean					Choices: no yes	Specifies different methods for calculating summary route metrics.
		router_id string						32-bit number assigned to a router running OSPFv2.
		shutdown boolean					Choices: no yes	Disable the OSPF instance.
		summary_address dictionary						Summary route configuration.
			address string					IP summary address.
			attribute_map string					Set attributes of summary route.
			mask string					Summary Mask.
			not_advertise boolean				Choices: no yes	Do not advertise summary route.
			prefix string					Prefix.
			tag integer					Set tag.
		timers list / elements=dictionary						Configure OSPF timers.
			lsa dictionary					Configure OSPF LSA timers.
				rx dictionary				Configure OSPF LSA receiving timers
					min_interval integer			Configure OSPF LSA arrival timer.
				tx dictionary				Configure OSPF LSA transmission timers.
					delay dictionary			Configure OSPF LSA transmission delay.
						initial integer		Delay to generate first occurrence of LSA in msecs.
						max integer		Maximum delay between originating the same LSA in msecs.
						min integer		Min delay between originating the same LSA in msecs.
			out_delay integer					Configure out-delay timer.
			pacing integer					Configure OSPF packet pacing.
			spf dictionary					Configure SPF timers
				initial integer				Initial SPF schedule delay in msecs.
				max integer				Max wait time between two SPFs in msecs.
				min integer				Min Hold time between two SPFs in msecs
				seconds integer				Seconds.
			throttle dictionary					Configure throttle timers(valid only for eos version < 4.23).
				attr string				throttle attribute.
				initial integer				Initial schedule delay in msecs.
				max integer				Max wait time
				min integer				Min Hold time
		traffic_engineering boolean					Choices: no yes	Enter traffic engineering config mode
		vrf string						VRF name .
running_config string								This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config \| section ospf. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string							Choices: deleted merged ← overridden replaced gathered rendered parsed	The state the configuration should be left in.

Notes

Note

Tested against Arista EOS 4.23.0F
This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state:
# ------------
# localhost#show running-config | section ospf
# localhost#

  - name: replace Ospf configs
    arista.eos.eos_ospfv2:
      config:
        - processes:
            - process_id: 1
              adjacency:
                exchange_start:
                    threshold: 20045623
              areas:
                - filter:
                    address: "10.1.1.0/24"
                  id: "0.0.0.2"
                - id: "0.0.0.50"
                  range:
                    address: "172.20.0.0/16"
                    cost: 34
              default_information:
                metric: 100
                metric_type: 1
                originate: True
              distance:
                intra_area: 85
              max_lsa:
                count: 8000
                ignore_count: 3
                ignore_time: 6
                reset_time: 20
                threshold: 40
              networks:
                - area: "0.0.0.0"
                  prefix: 10.10.2.0/24
                - area: "0.0.0.0"
                  prefix: "10.10.3.0/24"
              redistribute:
                - routes: "static"
              router_id: "170.21.0.4"
            - process_id: 2
              vrf: "vrf01"
              areas:
                - id: "0.0.0.9"
                  default_cost: 20
              max_lsa:
                count: 8000
                ignore_count: 3
                ignore_time: 6
                reset_time: 20
                threshold: 40
              networks:
                - area: "0.0.0.0"
                  prefix: 10.10.2.0/24
                - area: "0.0.0.0"
                  prefix: "10.10.3.0/24"
              redistribute:
                - routes: "static"
              router_id: "170.21.0.4"
            - process_id: 2
              vrf: "vrf01"
              areas:
                - id: "0.0.0.9"
                  default_cost: 20
              max_lsa:
                count: 8000
                ignore_count: 3
                ignore_time: 6
                reset_time: 20
                threshold: 40
            - process_id: 3
              vrf: "vrf02"
              redistribute:
                - routes: "connected"

# After state:
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
#
# router ospf 2 vrf vrf01
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
# localhost#
#
# "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]
#


# Using replaced:
# --------------

# Before State:

# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
# localhost#
#
# "before": [
#         {
#             "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]
#
  - name: replace Ospf configs
    arista.eos.eos_ospfv2:
          config:
            - processes:
                - process_id: 2
                  vrf: "vrf01"
                  point_to_point: True
                  redistribute:
                    - routes: "isis"
                      isis_level: "level-1"

          state: replaced

# After State:
# -----------
#         "router ospf 2 vrf vrf01",
#         "no area 0.0.0.9 default-cost 20",
#         "no max-lsa  8000 40 ignore-time 6  ignore-count 3  reset-time 20",
#         "point-to-point routes",
#         "redistribute isis level-1"
#
# "after": [
#         {
#             "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "isis_level": "level-1",
#                             "routes": "isis"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]
#

# Using overridden:
# ----------------

# Before State:
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    redistribute isis level-1
#    max-lsa 12000
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
# localhost#
#
# "before": [
#         {
#             "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "isis_level": "level-1",
#                             "routes": "isis"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]

  - name: override Ospf configs
    arista.eos.eos_ospfv2:
          config:
            - processes:
                - process_id: 2
                  vrf: "vrf01"
                  redistribute:
                    - routes: "connected"

          state: override

# After State:

# "no router ospf 1",
# "no router ospf 3",
# "router ospf 2 vrf vrf01",
# "no max-lsa  12000",
# "no redistribute isis level-1",
# "redistribute connected"
#
# "after": [
#         {
#             "processes": [
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 }
#             ]
#         }
#     ]

# Using Deleted:

# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    redistribute connected
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
# localhost#
#
# "before": [
#         {
#             "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]

  - name: Delete Ospf configs
    arista.eos.eos_ospfv2:
          config:
            - processes:
                - process_id: 1

          state: deleted

# After State:
# Commands:
# "no router ospf 1"

# "after": [
#         {
#             "processes": [
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]

# Using gathered:
# localhost#show running-config | section ospf
# router ospf 2 vrf vrf01
#    redistribute connected
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
# localhost#

  - name: replace Ospf configs
    arista.eos.eos_ospfv2:
          state: gathered

# "gathered": [
#         {
#             "processes": [
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 8000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf01"
#                 },
#                 {
#                     "max_lsa": {
#                         "count": 12000
#                     },
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]

# Using parsed:
# ------------

# parsed.cfg
# router ospf 1
#    adjacency exchange-start threshold 20045623
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50  range 172.20.0.0/16 cost 34
#    default-information originate  metric 100 metric-type 1
#    distance ospf intra-area 85
#    max-lsa  80000 40 ignore-count 3  ignore-time 6  reset-time 20
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    redistribute static
#    router-id 170.21.0.4
# router ospf 2 vrf vrf01,
#    area 0.0.0.9 default-cost 20
#    max-lsa  80000 40 ignore-count 3  ignore-time 6  reset-time 20
# router ospf 3 vrf vrf02
#    redistribute static

  - name: Parse Ospf configs
    arista.eos.eos_ospfv2:
          running_config: "{{ lookup('file', './parsed.cfg') }}"
          state: parsed

# "parsed": [
#         {
#             "processes": [
#                 {
#                     "adjacency": {
#                         "exchange_start": {
#                             "threshold": 20045623
#                         }
#                     },
#                     "areas": [
#                         {
#                             "filter": {
#                                 "address": "10.1.1.0/24"
#                             },
#                             "id": "0.0.0.2"
#                         },
#                         {
#                             "id": "0.0.0.50",
#                             "range": {
#                                 "address": "172.20.0.0/16",
#                                 "cost": 34
#                             }
#                         }
#                     ],
#                     "default_information": {
#                         "metric": 100,
#                         "metric_type": 1,
#                         "originate": true
#                     },
#                     "distance": {
#                         "intra_area": 85
#                     },
#                     "max_lsa": {
#                         "count": 80000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "networks": [
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.2.0/24"
#                         },
#                         {
#                             "area": "0.0.0.0",
#                             "prefix": "10.10.3.0/24"
#                         }
#                     ],
#                     "process_id": 1,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "router_id": "170.21.0.4"
#                 },
#                 {
#                     "areas": [
#                         {
#                             "default_cost": 20,
#                             "id": "0.0.0.9"
#                         }
#                     ],
#                     "max_lsa": {
#                         "count": 80000,
#                         "ignore_count": 3,
#                         "ignore_time": 6,
#                         "reset_time": 20,
#                         "threshold": 40
#                     },
#                     "process_id": 2,
#                     "vrf": "vrf01,"
#                 },
#                 {
#                     "process_id": 3,
#                     "redistribute": [
#                         {
#                             "routes": "static"
#                         }
#                     ],
#                     "vrf": "vrf02"
#                 }
#             ]
#         }
#     ]

# Using rendered:
# --------------

  - name: replace Ospf configs
    arista.eos.eos_ospfv2:
          config:
            - processes:
              - process_id: 1
                adjacency:
                  exchange_start:
                    threshold: 20045623
                areas:
                - filter:
                    address: 10.1.1.0/24
                  id: 0.0.0.2
                - id: 0.0.0.50
                  range:
                    address: 172.20.0.0/16
                    cost: 34
                default_information:
                  metric: 100
                  metric_type: 1
                  originate: true
                distance:
                  intra_area: 85
                max_lsa:
                  count: 8000
                  ignore_count: 3
                  ignore_time: 6
                  reset_time: 20
                  threshold: 40
                networks:
                - area: 0.0.0.0
                  prefix: 10.10.2.0/24
                - area: 0.0.0.0
                  prefix: 10.10.3.0/24
                redistribute:
                - routes: static
                router_id: 170.21.0.4
          state: rendered

# "rendered": [
#         "router ospf 1",
#         "adjacency exchange-start threshold 20045623",
#         "area 0.0.0.2 filter 10.1.1.0/24",
#         "area 0.0.0.50  range 172.20.0.0/16 cost 34",
#         "default-information originate metric 100 metric-type 1",
#         "distance ospf intra-area 85",
#         "max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20",
#         "network 10.10.2.0/24 area 0.0.0.0",
#         "network 10.10.3.0/24 area 0.0.0.0",
#         "redistribute static",
#         "router-id 170.21.0.4"
#     ]
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['router ospf 1', 'adjacency exchange-start threshold 20045623', 'area 0.0.0.2 filter 10.1.1.0/24', 'area 0.0.0.50 range 172.20.0.0/16 cost 34', 'default-information originate metric 100 metric-type 1', 'distance ospf intra-area 85', 'max-lsa 8000 40 ignore-count 3 ignore-time 6 reset-time 20', 'network 10.10.2.0/24 area 0.0.0.0', 'network 10.10.3.0/24 area 0.0.0.0', 'redistribute static', 'router-id 170.21.0.4']

Authors

Gomathi Selvi Srinivasan (@GomathiselviS)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/arista/eos/eos_ospfv2_module.html

Docs

Docs4dev

Title here

arista.eos.eos_ospfv2 – OSPFv2 resource module

Synopsis

Parameters

Notes

Examples

Return Values

Authors