cisco.ios.ios_bgp_global – Global BGP resource module

Note

This plugin is part of the cisco.ios collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_bgp_global.

New in version 1.3.0: of cisco.ios

Synopsis

This module configures and manages the attributes of global bgp on Cisco IOS.

Note

This module has a corresponding action plugin.

Parameters

Parameter							Choices/Defaults	Comments
config dictionary								A list of configurations for global bgp.
	aggregate_address dictionary							Configure BGP aggregate entries
		address string						Aggregate address
		advertise_map string						Set condition to advertise attribute
		as_confed_set boolean					Choices: no yes	Generate AS confed set path information
		as_set boolean					Choices: no yes	Generate AS set path information
		attribute_map string						Set attributes of aggregate
		netmask string						Aggregate mask
		summary_only boolean					Choices: no yes	Filter more specific routes from updates
		suppress_map string						Conditionally filter more specific routes from updates
	as_number string / required							Autonomous system number.
	auto_summary boolean						Choices: no yes	Enable automatic network number summarization
	bgp dictionary							Enable address family and enter its config mode
		additional_paths dictionary						Additional paths in the BGP table
			install boolean				Choices: no yes	Additional paths to install into RIB
			receive boolean				Choices: no yes	Receive additional paths from neighbors
			select dictionary					Selection criteria to pick the paths
				all boolean			Choices: no yes	Select all available paths
				best integer				Select best N paths (2-3).
				best_external boolean			Choices: no yes	Select best-external path
				group_best boolean			Choices: no yes	Select group-best path
			send boolean				Choices: no yes	Send additional paths to neighbors
		advertise_best_external boolean					Choices: no yes	Advertise best external path to internal peers
		aggregate_timer integer						Configure Aggregation Timer Please refer vendor documentation for valid values
		always_compare_med boolean					Choices: no yes	Allow comparing MED from different neighbors
		asnotation boolean					Choices: no yes	Change the default asplain notation asdot notation
		bestpath list / elements=dictionary						Change the default bestpath selection
			aigp boolean				Choices: no yes	if both paths doesn't have aigp ignore on bestpath comparision ignore
			compare_routerid boolean				Choices: no yes	Compare router-id for identical EBGP paths
			cost_community boolean				Choices: no yes	cost community
			igp_metric boolean				Choices: no yes	igp metric Ignore igp metric in bestpath selection
			med dictionary					MED attribute
				confed boolean			Choices: no yes	Compare MED among confederation paths
				missing_as_worst boolean			Choices: no yes	Treat missing MED as the least preferred one
		client_to_client dictionary						Configure client to client route reflection
			all boolean				Choices: no yes	inter-cluster and intra-cluster (default)
			intra_cluster string					intra cluster reflection intra-cluster reflection for cluster-id
			set boolean				Choices: no yes	set reflection of routes allowed
		cluster_id boolean					Choices: no yes	Configure Route-Reflector Cluster-id (peers may reset) A.B.C.D/Please refer vendor documentation for valid Route-Reflector Cluster-id
		confederation dictionary						AS confederation parameters
			identifier string					Set routing domain confederation AS AS number
			peers string					Peer ASs in BGP confederation AS number
		consistency_checker dictionary						Consistency-checker
			auto_repair dictionary					Auto-Repair
				interval integer				Set the bgp consistency checker Please refer vendor documentation for valid values
				set boolean			Choices: no yes	Enable Auto-Repair
			error_message dictionary					Log Error-Msg
				interval integer				Set the bgp consistency checker Please refer vendor documentation for valid values
				set boolean			Choices: no yes	Enable Error-Msg
		dampening dictionary						Enable route-flap dampening
			max_suppress integer					Maximum duration to suppress a stable route Please refer vendor documentation for valid values
			penalty_half_time integer					Half-life time for the penalty Please refer vendor documentation for valid values
			reuse_route_val integer					Value to start reusing a route Please refer vendor documentation for valid values
			route_map string					Route-map to specify criteria for dampening
			suppress_route_val integer					Value to start suppressing a route Please refer vendor documentation for valid values
		deterministic_med boolean					Choices: no yes	Pick the best-MED path among paths advertised from the neighboring AS
		dmzlink_bw boolean					Choices: no yes	Use DMZ Link Bandwidth as weight for BGP multipaths
		enforce_first_as boolean					Choices: no yes	Enforce the first AS for EBGP routes(default)
		enhanced_error boolean					Choices: no yes	Enabled BGP Enhanced error handling
		fast_external_fallover boolean					Choices: no yes	Immediately reset session if a link to a directly connected external peer goes down
		graceful_restart dictionary						Graceful restart capability parameters
			extended boolean				Choices: no yes	Enable Graceful-Restart Extension
			restart_time integer					Set the max time needed to restart and come back up Please refer vendor documentation for valid values
			set boolean				Choices: no yes	Set Graceful-Restart
			stalepath_time integer					Set the max time to hold onto restarting peer's stale paths Please refer vendor documentation for valid values
		graceful_shutdown dictionary						Graceful shutdown capability parameters
			community string					Set Community for Gshut routes community number/community number in aa:nn format
			local_preference integer					Set Local Preference for Gshut routes Please refer vendor documentation for valid values
			neighbors dictionary					Gracefully shut down all neigbors
				activate boolean			Choices: no yes	Activate graceful shutdown of all neigbors
				time integer				time in seconds Please refer vendor documentation for valid values
			vrfs dictionary					Gracefully shut down all vrf neigbors
				activate boolean			Choices: no yes	Activate graceful shutdown of all neigbors
				time integer				time in seconds Please refer vendor documentation for valid values
		inject_map dictionary						Routemap which specifies prefixes to inject
			copy_attributes boolean				Choices: no yes	Copy attributes from aggregate
			exist_map_name string					route-map name
			name string					route-map name
		listen dictionary						Neighbor subnet range listener
			limit integer					Set the max limit for the dynamic subnet range neighbors Please refer vendor documentation for valid values
			range dictionary					Subnet network range
				ipv4_with_subnet string				IPv4 subnet range(A.B.C.D/nn)
				ipv6_with_subnet string				IPv6 subnet range(X:X:X:X::X/<0-128>)
				peer_group string				Member of the peer-group
		log_neighbor_changes boolean					Choices: no yes	Log neighbor up/down and reset reason
		maxas_limit integer						Allow AS-PATH attribute from any neighbor imposing a limit on number of ASes Please refer vendor documentation for valid values
		maxcommunity_limit integer						Allow COMMUNITY attribute from any neighbor imposing a limit on number of communities Please refer vendor documentation for valid values
		maxextcommunity_limit integer						Allow EXTENDED COMMUNITY attribute from any neighbor imposing a limit on number of extended communities Please refer vendor documentation for valid values
		nexthop dictionary						Nexthop tracking commands
			route_map string					Route map for valid nexthops
			trigger dictionary					nexthop trackings
				delay integer				Set the delay to tigger nexthop tracking Please refer vendor documentation for valid values
				enable boolean			Choices: no yes	Enable nexthop tracking
		nopeerup_delay list / elements=dictionary						Set how long BGP will wait for the first peer to come up before beginning the update delay or graceful restart timers (in seconds)
			cold_boot integer					How long to wait for the first peer to come up upon a cold boot Please refer vendor documentation for valid values
			nsf_switchover integer					How long to wait for the first peer, post NSF switchover Please refer vendor documentation for valid values
			post_boot integer					How long to wait for the first peer to come up once the system is already booted and all peers go down Please refer vendor documentation for valid values
			user_initiated integer					How long to wait for the first peer, post a manual clear of BGP peers by the admin user Please refer vendor documentation for valid values
		recursion boolean					Choices: no yes	recursion rule for the nexthops recursion via host for the nexthops
		redistribute_internal boolean					Choices: no yes	Allow redistribution of iBGP into IGPs (dangerous)
		refresh dictionary						refresh
			max_eor_time integer					Configure refresh max-eor time Please refer vendor documentation for valid values
			stalepath_time integer					Configure refresh stale-path time Please refer vendor documentation for valid values
		regexp boolean					Choices: no yes	Select regular expression engine Enable bounded-execution-time regular expression engine
		route_map boolean					Choices: no yes	route-map control commands Have route-map set commands take priority over BGP commands such as next-hop unchanged
		router_id dictionary						Override configured router identifier (peers will reset)
			address string					Manually configured router identifier(A.B.C.D)
			interface string					Use IPv4 address on interface
			vrf boolean				Choices: no yes	vrf-specific router id configuration Automatically assign per-vrf bgp router id
		scan_time integer						Configure background scanner interval Please refer vendor documentation for valid values
		slow_peer dictionary						Configure slow-peer
			detection dictionary					Slow-peer detection
				set boolean			Choices: no yes	Slow-peer detection
				threshold integer				Set the slow-peer detection threshold Please refer vendor documentation for valid values
			split_update_group dictionary					Configure slow-peer split-update-group
				dynamic boolean			Choices: no yes	Dynamically split the slow peer to slow-update group
				permanent integer				Keep the slow-peer permanently in slow-update group
		snmp boolean					Choices: no yes	BGP SNMP options BGP SNMP trap options Use cbgpPeer2Type as part of index for traps
		soft_reconfig_backup boolean					Choices: no yes	Use soft-reconfiguration inbound only when route-refresh is not negotiated
		sso boolean					Choices: no yes	Stateful Switchover Enable SSO only for Route-Refresh capable peers
		suppress_inactive boolean					Choices: no yes	Suppress routes that are not in the routing table
		transport boolean					Choices: no yes	Global enable/disable transport session parameters Transport path MTU discovery
		update_delay integer						Set the max initial delay for sending update Please refer vendor documentation for valid values
		update_group boolean					Choices: no yes	Manage peers in bgp update groups Split update groups based on Policy Keep peers with as-override in different update groups
		upgrade_cli dictionary						Upgrade to hierarchical AFI mode
			af_mode boolean				Choices: no yes	Upgrade to AFI mode
			set boolean				Choices: no yes	enable upgrade to hierarchical AFI mode
	bmp dictionary							BGP Monitoring Protocol)
		buffer_size integer						BMP Buffer Size Please refer vendor documentation for valid values
		initial_refresh dictionary						Initial Refresh options
			delay integer					Delay before Initial Refresh
			skip boolean				Choices: no yes	skip all refreshes
		server integer						Server Information Please refer vendor documentation for valid values
	default_information boolean						Choices: no yes	Control distribution of default information Distribute a default route
	default_metric integer							Set metric of redistributed routes Please refer vendor documentation for valid values
	distance dictionary							Define an administrative distance
		admin dictionary						Administrative distance
			acl string					IP Standard access list number IP Standard expanded access list number Standard access-list name
			address string					IP Source address (A.B.C.D)
			distance integer					Administrative distance Please refer vendor documentation for valid values
			wildcard_bit string					Wildcard bits (A.B.C.D)
		bgp dictionary						BGP distance
			routes_external integer					Distance for routes external to the AS Please refer vendor documentation for valid values
			routes_internal integer					Distance for routes internal to the AS Please refer vendor documentation for valid values
			routes_local integer					Distance for local routes Please refer vendor documentation for valid values
		mbgp dictionary						MBGP distance
			routes_external integer					Distance for routes external to the AS Please refer vendor documentation for valid values
			routes_internal integer					Distance for routes internal to the AS Please refer vendor documentation for valid values
			routes_local integer					Distance for local routes Please refer vendor documentation for valid values
	distribute_list dictionary							Filter networks in routing updates
		acl string						IP access list number/name
		in boolean					Choices: no yes	Filter incoming routing updates
		interface string						interface details
		out boolean					Choices: no yes	Filter outgoing routing updates
	maximum_paths dictionary							Forward packets over multiple paths
		eibgp integer						Both eBGP and iBGP paths as multipath
		ibgp integer						iBGP-multipath
		paths integer						Number of paths
	maximum_secondary_paths dictionary							Maximum secondary paths
		eibgp integer						Both eBGP and iBGP paths as secondary multipath
		ibgp integer						iBGP-secondary-multipath
		paths integer						Number of secondary paths
	neighbor list / elements=dictionary							Specify a neighbor router
		activate boolean					Choices: no yes	Enable the Address Family for this Neighbor
		additional_paths dictionary						Negotiate additional paths capabilities with this neighbor
			disable boolean				Choices: no yes	Disable additional paths for this neighbor
			receive boolean				Choices: no yes	Receive additional paths from neighbors
			send boolean				Choices: no yes	Send additional paths to neighbors
		address string						Neighbor address (A.B.C.D)
		advertise dictionary						Advertise to this neighbor
			additional_paths dictionary					Advertise additional paths
				all boolean			Choices: no yes	Select all available paths
				best integer				Select best N paths (2-3).
				group_best boolean			Choices: no yes	Select group-best path
			best_external boolean				Choices: no yes	Advertise best-external (at RRs best-internal) path
			diverse_path dictionary					Advertise additional paths
				backup boolean			Choices: no yes	Diverse path can be backup path
				mpath boolean			Choices: no yes	Diverse path can be multipath
		advertise_map dictionary						specify route-map for conditional advertisement
			exist_map string					advertise prefix only if prefix is in the condition exists condition route-map name
			name string					advertise route-map name
			non_exist_map string					advertise prefix only if prefix in the condition does not exist condition route-map name
		advertisement_interval integer						Minimum interval between sending BGP routing updates
		aigp dictionary						AIGP on neighbor
			enable boolean				Choices: no yes	Enable AIGP
			send dictionary					Cost community or MED carrying AIGP VALUE
				cost_community dictionary				Cost extended community carrying AIGP Value
					id integer			Community ID Please refer vendor documentation for valid values
					poi dictionary			Point of Insertion
						igp_cost boolean	Choices: no yes	Point of Insertion After IGP
						pre_bestpath boolean	Choices: no yes	Point of Insertion At Beginning
						transitive boolean	Choices: no yes	Cost community is Transitive
				med boolean			Choices: no yes	Med carrying AIGP Value
		allow_policy boolean					Choices: no yes	Enable the policy support for this IBGP Neighbor
		allowas_in integer						Accept as-path with my AS present in it
		as_override boolean					Choices: no yes	Override matching AS-number while sending update Maintain Split Horizon while sending update
		bmp_activate dictionary						Activate the BMP monitoring for a BGP peer
			all boolean				Choices: no yes	Activate BMP monitoring for all servers
			server integer					Activate BMP for server BMP Server Number Please refer vendor documentation for valid values
		capability dictionary						Advertise capability to the peer Advertise ORF capability to the peer Advertise prefixlist ORF capability to this neighbor
			both boolean				Choices: no yes	Capability to SEND and RECEIVE the ORF to/from this neighbor
			receive boolean				Choices: no yes	Capability to RECEIVE the ORF from this neighbor
			send boolean				Choices: no yes	Capability to SEND the ORF to this neighbor
		cluster_id string						Configure Route-Reflector Cluster-id (peers may reset) Route-Reflector Cluster-id as 32 bit quantity, or Route-Reflector Cluster-id in IP address format (A.B.C.D)
		default_originate dictionary						Originate default route to this neighbor
			route_map string					Route-map to specify criteria to originate default
			set boolean				Choices: no yes	Originate default route to this neighbor
		description string						Neighbor specific description
		disable_connected_check boolean					Choices: no yes	one-hop away EBGP peer using loopback address
		distribute_list dictionary						Filter updates to/from this neighbor
			acl string					IP access list number/name
			in boolean				Choices: no yes	Filter incoming updates
			out boolean				Choices: no yes	Filter outgoing updates
		dmzlink_bw boolean					Choices: no yes	Propagate the DMZ link bandwidth
		ebgp_multihop dictionary						Allow EBGP neighbors not on directly connected networks
			enable boolean				Choices: no yes	Allow EBGP neighbors not on directly connected networks
			hop_count integer					Maximum hop count Please refer vendor documentation for valid values
		fall_over dictionary						Session fall on peer route lost
			bfd dictionary					Use BFD to detect failure
				multi_hop boolean			Choices: no yes	Force BFD multi-hop to detect failure
				set boolean			Choices: no yes	set bfd
				single_hop boolean			Choices: no yes	Force BFD single-hop to detect failure
			route_map string					Route map for peer route
		filter_list dictionary						Establish BGP filters
			in boolean				Choices: no yes	Filter incoming updates
			out boolean				Choices: no yes	Filter outgoing updates
			path_acl string					AS path access list
		ha_mode dictionary						high availability mode
			disable boolean				Choices: no yes	disable graceful-restart
			set boolean				Choices: no yes	set ha-mode and graceful-restart for this peer
		inherit string						Inherit a template Inherit a peer-session template and Template name
		ipv6_adddress string						Neighbor ipv6 address (X:X:X:X::X)
		local_as dictionary						Specify a local-as number
			dual_as boolean				Choices: no yes	Accept either real AS or local AS from the ebgp peer
			no_prepend dictionary					Do not prepend local-as to updates from ebgp peers
				replace_as boolean			Choices: no yes	Replace real AS with local AS in the EBGP updates
				set boolean			Choices: no yes	Set prepend
			number integer					AS number used as local AS Please refer vendor documentation for valid values
			set boolean				Choices: no yes	set local-as number
		log_neighbor_changes dictionary						Log neighbor up/down and reset reason
			disable boolean				Choices: no yes	disable Log neighbor up/down and reset
			set boolean				Choices: no yes	set Log neighbor up/down and reset
		maximum_prefix dictionary						Maximum number of prefixes accepted from this peer
			max_no integer					maximum no. of prefix limit
			restart integer					Restart bgp connection after limit is exceeded
			threshold_val integer					Threshold value (%) at which to generate a warning msg
			warning_only boolean				Choices: no yes	Only give warning message when limit is exceeded
		next_hop_self dictionary						Disable the next hop calculation for this neighbor
			all boolean				Choices: no yes	Enable next-hop-self for both eBGP and iBGP received paths
			set boolean				Choices: no yes	Enable next-hop-self
		next_hop_unchanged dictionary						Propagate next hop unchanged for iBGP paths to this neighbor Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
			allpaths boolean				Choices: no yes	Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
			set boolean				Choices: no yes	Enable next-hop-unchanged
		password string						Set a password
		path_attribute dictionary						BGP optional attribute filtering
			discard dictionary					Discard matching path-attribute for this neighbor
				in boolean			Choices: no yes	Perform inbound path-attribute filtering
				range dictionary				path attribute range
					end integer			path attribute range end value Please refer vendor documentation for valid values
					start integer			path attribute range start value Please refer vendor documentation for valid values
				type integer				path attribute type Please refer vendor documentation for valid values
			treat_as_withdraw dictionary					Treat-as-withdraw matching path-attribute for this neighbor
				in boolean			Choices: no yes	Perform inbound path-attribute filtering
				range dictionary				path attribute range
					end integer			path attribute range end value Please refer vendor documentation for valid values
					start integer			path attribute range start value Please refer vendor documentation for valid values
				type integer				path attribute type Please refer vendor documentation for valid values
		peer_group string						Member of the peer-group
		remote_as integer						Specify a BGP neighbor AS of remote neighbor
		remove_private_as dictionary						Remove private AS number from outbound updates
			all boolean				Choices: no yes	Remove all private AS numbers
			replace_as boolean				Choices: no yes	Replace all private AS numbers with local AS
			set boolean				Choices: no yes	Remove private AS number
		route_map dictionary						Apply route map to neighbor
			in boolean				Choices: no yes	Apply map to incoming routes
			name string					Replace all private AS numbers with local AS
			out boolean				Choices: no yes	Apply map to outbound routes
		route_reflector_client boolean					Choices: no yes	Configure a neighbor as Route Reflector client
		route_server_client dictionary						Configure a neighbor as Route Server client
			context string					Specify Route Server context for neighbor Route Server context name
			set boolean				Choices: no yes	Set Route Server client
		send_community dictionary						Send Community attribute to this neighbor
			both boolean				Choices: no yes	Send Standard and Extended Community attributes
			extended boolean				Choices: no yes	Send Extended Community attribute
			set boolean				Choices: no yes	Set send Community attribute to this neighbor
			standard boolean				Choices: no yes	Send Standard Community attribute
		send_label dictionary						Send NLRI + MPLS Label to this peer
			explicit_null boolean				Choices: no yes	Advertise Explicit Null label in place of Implicit Null
			set boolean				Choices: no yes	Set send NLRI + MPLS Label to this peer
		shutdown dictionary						Administratively shut down this neighbor
			graceful integer					Gracefully shut down this neighbor time in seconds Please refer vendor documentation for valid values
			set boolean				Choices: no yes	shut down
		slow_peer dictionary						Configure slow-peer
			detection dictionary					Configure slow-peer
				disable boolean			Choices: no yes	Disable slow-peer detection
				enable boolean			Choices: no yes	Enable slow-peer detection
				threshold integer				Set the slow-peer detection threshold
			split_update_group dictionary					Configure slow-peer split-update-group
				dynamic dictionary				Dynamically split the slow peer to slow-update group
					disable boolean		Choices: no yes	Disable slow-peer detection
					enable boolean		Choices: no yes	Enable slow-peer detection
					permanent boolean		Choices: no yes	Keep the slow-peer permanently in slow-update group
				static boolean			Choices: no yes	Static slow-peer
		soft_reconfiguration boolean					Choices: no yes	Per neighbor soft reconfiguration Allow inbound soft reconfiguration for this neighbor
		tag string						Neighbor tag
		timers dictionary						BGP per neighbor timers
			holdtime integer					Holdtime
			interval integer					Keepalive interval
			min_holdtime integer					Minimum hold time from neighbor
		translate_update dictionary						Translate Update to MBGP format
			nlri dictionary					Specify type of nlri to translate to
				multicast boolean			Choices: no yes	Translate Update to multicast nlri
				unicast boolean			Choices: no yes	Process Update as unicast nlri
			set boolean				Choices: no yes	Set Translate Update
		transport dictionary						Transport options
			connection_mode dictionary					Specify passive or active connection
				active boolean			Choices: no yes	Actively establish the TCP session
				passive boolean			Choices: no yes	Passively establish the TCP session
			multi_session boolean				Choices: no yes	Use Multi-session for transport
			path_mtu_discovery dictionary					Use transport path MTU discovery
				disable boolean			Choices: no yes	disable
				set boolean			Choices: no yes	Use path MTU discovery
		ttl_security integer						BGP ttl security check maximum number of hops Please refer vendor documentation for valid values
		unsuppress_map string						Route-map to selectively unsuppress suppressed routes Name of route map
		version integer						Set the BGP version to match a neighbor Neighbor's BGP version Please refer vendor documentation for valid values
		weight integer						Set default weight for routes from this neighbor
	redistribute list / elements=dictionary							Redistribute information from another routing protocol
		application dictionary						Application
			metric integer					Metric for redistributed routes
			name string					Application name
			route_map string					Route map reference
		bgp dictionary						Border Gateway Protocol (BGP)
			as_number string					Autonomous system number
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		connected dictionary						Connected
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		eigrp dictionary						Enhanced Interior Gateway Routing Protocol (EIGRP)
			as_number string					Autonomous system number
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		isis dictionary						ISO IS-IS
			area_tag string					ISO routing area tag
			clns boolean				Choices: no yes	Redistribution of OSI dynamic routes
			ip boolean				Choices: no yes	Redistribution of IP dynamic routes
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		iso_igrp dictionary						IGRP for OSI networks
			area_tag string					ISO routing area tag
			route_map string					Route map reference
		lisp dictionary						Locator ID Separation Protocol (LISP)
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		mobile dictionary						Mobile routes
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		odr dictionary						On Demand stub Routes
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		ospf dictionary						Open Shortest Path First (OSPF)
			match dictionary					On Demand stub Routes
				external boolean			Choices: no yes	Redistribute OSPF external routes
				internal boolean			Choices: no yes	Redistribute OSPF internal routes
				nssa_external boolean			Choices: no yes	Redistribute OSPF NSSA external routes
				type_1 boolean			Choices: no yes	Redistribute NSSA external type 1 routes
				type_2 boolean			Choices: no yes	Redistribute NSSA external type 2 routes
			metric integer					Metric for redistributed routes
			process_id integer					Process ID
			route_map string					Route map reference
			vrf string					VPN Routing/Forwarding Instance
		ospfv3 dictionary						OSPFv3
			match dictionary					On Demand stub Routes
				external boolean			Choices: no yes	Redistribute OSPF external routes
				internal boolean			Choices: no yes	Redistribute OSPF internal routes
				nssa_external boolean			Choices: no yes	Redistribute OSPF NSSA external routes
				type_1 boolean			Choices: no yes	Redistribute NSSA external type 1 routes
				type_2 boolean			Choices: no yes	Redistribute NSSA external type 2 routes
			metric integer					Metric for redistributed routes
			process_id integer					Process ID
			route_map string					Route map reference
		rip dictionary						Routing Information Protocol (RIP)
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		static dictionary						Static routes
			clns boolean				Choices: no yes	Redistribution of OSI static routes
			ip boolean				Choices: no yes	Redistribution of IP static routes
			metric integer					Metric for redistributed routes
			route_map string					Route map reference
		vrf dictionary						Specify a source VRF
			global boolean				Choices: no yes	global VRF
			name string					Source VRF name
	route_server_context dictionary							Enter route server context command mode
		address_family dictionary						Enter address family command mode
			afi string				Choices: ipv4 ipv6	Address family
			import_map string					Import matching routes using a route map Name of route map
			modifier string				Choices: multicast unicast	Address Family modifier
		description string						Textual description of the router server context
		name string						Name of route server context
	scope dictionary							Enter scope command mode
		global boolean					Choices: no yes	Global scope
		vrf string						VRF scope VPN Routing/Forwarding instance name
	synchronization boolean						Choices: no yes	Perform IGP synchronization
	table_map dictionary							Map external entry attributes into routing table
		filter boolean					Choices: no yes	Selective route download
		name string						route-map name
	template dictionary							Enter template command mode
		peer_policy string						Template configuration for policy parameters
		peer_session string						Template configuration for session parameters
	timers dictionary							Adjust routing timers BGP timers
		holdtime integer						Holdtime
		keepalive integer						Keepalive interval
		min_holdtime integer						Minimum hold time from neighbor
running_config string								This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^router bgp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string							Choices: merged ← replaced deleted purged gathered rendered parsed	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command show running-config \| include ip route\|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Notes

Note

Tested against Cisco IOSv Version 15.2 on VIRL

Examples

# Using merged

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp

- name: Merge provided configuration with device configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - compare_routerid: true
        nopeerup_delay:
          - post_boot: 10
        dampening:
          penalty_half_time: 1
          reuse_route_val: 1
          suppress_route_val: 1
          max_suppress: 1
        graceful_shutdown:
          neighbors:
            time: 50
          community: 100
          local_preference: 100
      neighbor:
        - address: 198.51.100.1
          description:  merge neighbor
          remote_as: 100
          aigp:
            send:
              cost_community:
                id: 100
                poi:
                  igp_cost: true
                  transitive: true
          route_map:
            name: test-route
            out: true
    state: merged

# Commands fired:
# ---------------
#
#  "commands": [
#         "router bgp 65000",
#         "bgp dampening 1 1 1 1",
#         "bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "bgp advertise-best-external",
#         "bgp nopeerup-delay post-boot 10",
#         "bgp bestpath compare-routerid",
#         "neighbor 198.51.100.1 remote-as 100",
#         "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "neighbor 198.51.100.1 description merge neighbor",
#         "neighbor 198.51.100.1 route-map test-route out"
#     ]

# After state:
# ------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


# Using replaced

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: Replaces device configuration of listed global BGP with provided configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - med:
              confed: true
        log_neighbor_changes: true
        nopeerup_delay:
          - post_boot: 10
            cold_boot: 20
      neighbor:
        - address: 192.0.2.1
          description:  replace neighbor
          remote_as: 100
          slow_peer:
            detection:
              disable: true
    state: replaced

# Commands fired:
# ---------------
#
#  "commands": [
#     "router bgp 65000"
#     "no bgp dampening 1 1 1 1"
#     "no timers bgp 100 200 150"
#     "no bgp bestpath compare-routerid"
#     "bgp bestpath med confed"
#     "bgp nopeerup-delay cold-boot 20"
#     "no neighbor 198.51.100.1 remote-as 100"
#     "neighbor 192.0.2.1 remote-as 100"
#     "no bgp graceful-shutdown all neighbors 50 local-preference 100 community 100"
#     "no neighbor 198.51.100.1 route-map test-route out"
#     "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive"
#     "no neighbor 198.51.100.1 description merge neighbor"
#     "neighbor 192.0.2.1 slow-peer detection disable"
#     "neighbor 192.0.2.1 description replace neighbor"
# ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay cold-boot 20
#  bgp nopeerup-delay post-boot 10
#  bgp bestpath med confed
#  bgp advertise-best-external
#  redistribute connected metric 10
#  neighbor 192.0.2.1 remote-as 100
#  neighbor 192.0.2.1 description replace neighbor
#  neighbor 192.0.2.1 slow-peer detection disable

# Using Deleted

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out

- name: "Delete global BGP (Note: This won't delete the configured global BGP)"
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
    state: deleted

# Commands fired:
# ---------------
#  "commands": [
#         "router bgp 65000",
#         "no bgp dampening 1 1 1 1",
#         "no bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "no bgp advertise-best-external",
#         "no bgp bestpath compare-routerid",
#         "no bgp nopeerup-delay post-boot 10",
#         "no neighbor 198.51.100.1 remote-as 100",
#         "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "no neighbor 198.51.100.1 description merge neighbor",
#         "no neighbor 198.51.100.1 route-map test-route out"
#     ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000


# Using Deleted without any config passed
#"(NOTE: This will delete all of configured global BGP)"

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: "Delete global BGP without config"
  cisco.ios.ios_bgp_global:
    state: deleted

# Commands fired:
# ---------------
#  "commands": [
#         "router bgp 65000",
#         "no bgp dampening 1 1 1 1",
#         "no bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#         "no bgp advertise-best-external",
#         "no bgp bestpath compare-routerid",
#         "no bgp nopeerup-delay post-boot 10",
#         "no neighbor 198.51.100.1 remote-as 100",
#         "no neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#         "no neighbor 198.51.100.1 description merge neighbor",
#         "no neighbor 198.51.100.1 route-map test-route out"
#     ]


# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000

# Using Purged
#"(NOTE: This WILL delete the configured global BGP)"

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: 'Delete the configured global BGP (Note: This WILL delete the the configured
    global BGP)'
  cisco.ios.ios_bgp_global:
    state: purged

# Commands fired:
# ---------------
#  "commands": [
#         "no router bgp 65000",
#     ]

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp

# Using Gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out


- name: Gather listed global BGP with provided configurations
  cisco.ios.ios_bgp_global:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
#  "gathered": {
#         "as_number": "65000",
#         "bgp": {
#             "advertise_best_external": true,
#             "bestpath": [
#                 {
#                     "compare_routerid": true
#                 }
#             ],
#             "dampening": {
#                 "max_suppress": 1,
#                 "penalty_half_time": 1,
#                 "reuse_route_val": 1,
#                 "suppress_route_val": 1
#             },
#             "graceful_shutdown": {
#                 "community": "100",
#                 "local_preference": 100,
#                 "neighbors": {
#                     "time": 50
#                 }
#             },
#             "nopeerup_delay": [
#                 {
#                     "post_boot": 10
#                 }
#             ]
#         },
#         "neighbor": [
#             {
#                 "address": "198.51.100.1",
#                 "aigp": {
#                     "send": {
#                         "cost_community": {
#                             "id": 100,
#                             "poi": {
#                                 "igp_cost": true,
#                                 "transitive": true
#                             }
#                         }
#                     }
#                 },
#                 "description": "merge neighbor",
#                 "remote_as": 100,
#                 "route_map": {
#                     "name": "test-route",
#                     "out": true
#                 }
#             }
#         ]
#     }

# Using Rendered

- name: Rendered the provided configuration with the existing running configuration
  cisco.ios.ios_bgp_global:
    config:
      as_number: 65000
      bgp:
        advertise_best_external: true
        bestpath:
          - compare_routerid: true
        nopeerup_delay:
          - post_boot: 10
        dampening:
          penalty_half_time: 1
          reuse_route_val: 1
          suppress_route_val: 1
          max_suppress: 1
        graceful_shutdown:
          neighbors:
            time: 50
          community: 100
          local_preference: 100
      neighbor:
        - address: 198.51.100.1
          description:  merge neighbor
          remote_as: 100
          aigp:
            send:
              cost_community:
                id: 100
                poi:
                  igp_cost: true
                  transitive: true
          route_map:
            name: test-route
            out: true
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#       "router bgp 65000",
#       "bgp dampening 1 1 1 1",
#       "bgp graceful-shutdown all neighbors 50 community 100 local-preference 100",
#       "bgp advertise-best-external",
#       "bgp nopeerup-delay post-boot 10",
#       "bgp bestpath compare-routerid",
#       "neighbor 198.51.100.1 remote-as 100",
#       "neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive",
#       "neighbor 198.51.100.1 description merge neighbor",
#       "neighbor 198.51.100.1 route-map test-route out"
#  ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router bgp 65000
#  bgp nopeerup-delay post-boot 10
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  bgp bestpath compare-routerid
#  bgp dampening 1 1 1 1
#  bgp advertise-best-external
#  neighbor 198.51.100.1 remote-as 100
#  neighbor 198.51.100.1 description merge neighbor
#  neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#  neighbor 198.51.100.1 route-map test-route out

- name: Parse the commands for provided configuration
  cisco.ios.ios_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
#  "parsed": {
#         "as_number": "65000",
#         "bgp": {
#             "advertise_best_external": true,
#             "bestpath": [
#                 {
#                     "compare_routerid": true
#                 }
#             ],
#             "dampening": {
#                 "max_suppress": 1,
#                 "penalty_half_time": 1,
#                 "reuse_route_val": 1,
#                 "suppress_route_val": 1
#             },
#             "graceful_shutdown": {
#                 "community": "100",
#                 "local_preference": 100,
#                 "neighbors": {
#                     "time": 50
#                 }
#             },
#             "nopeerup_delay": [
#                 {
#                     "post_boot": 10
#                 }
#             ]
#         },
#         "neighbor": [
#             {
#                 "address": "198.51.100.1",
#                 "aigp": {
#                     "send": {
#                         "cost_community": {
#                             "id": 100,
#                             "poi": {
#                                 "igp_cost": true,
#                                 "transitive": true
#                             }
#                         }
#                     }
#                 },
#                 "description": "merge neighbor",
#                 "remote_as": 100,
#                 "route_map": {
#                     "name": "test-route",
#                     "out": true
#                 }
#             }
#         ]
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device Sample: ['router bgp 65000', 'bgp nopeerup-delay post-boot 10', 'bgp advertise-best-external']

Authors

Sumit Jaiswal (@justjais)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/ios/ios_bgp_global_module.html

Docs

Docs4dev

Title here

cisco.ios.ios_bgp_global – Global BGP resource module

Synopsis

Parameters

Notes

Examples

Return Values

Authors