cisco.ios.ios_route_maps – Route maps resource module

Note

This plugin is part of the cisco.ios collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_route_maps.

New in version 2.1.0: of cisco.ios

Synopsis

This module configures and manages the attributes of Route maps on Cisco IOS.

Note

This module has a corresponding action plugin.

Parameters

Parameter							Choices/Defaults	Comments
config list / elements=dictionary								A list of configurations for Route maps.
	entries list / elements=dictionary							A list of configurations entries for Route maps.
		action string					Choices: deny permit	Route map set operations
		continue_entry dictionary						Continue on a different entry within the route-map
			entry_sequence integer					Route-map entry sequence number Please refer vendor documentation for valid values
			set boolean				Choices: no yes	Set continue
		description string						Route-map comment
		match dictionary						Match values from routing table
			additional_paths dictionary					BGP Add-Path match policie BGP Add-Path advertise-set policy
				all boolean			Choices: no yes	BGP Add-Path advertise all paths
				best integer				BGP Add-Path advertise best n paths (1-3)
				best_range dictionary				BGP Add-Path advertise best paths (range m to n)
					lower_limit integer			BGP Add-Path best paths to advertise (lower limit) (1-3)
					upper_limit integer			BGP Add-Path best paths to advertise (upper limit) (1-3)
				group_best boolean			Choices: no yes	BGP Add-Path advertise group-best path
			as_path dictionary					Match BGP AS path list
				acls list / elements=integer				AS path access-list Please refer vendor documentation for valid values
				set boolean			Choices: no yes	Set AS path list
			clns dictionary					CLNS information
				address string				Match address of route or match packet
				next_hop string				Match next-hop address of route
				route_source string				Match advertising source address of route
			community dictionary					Match BGP community list
				exact_match boolean			Choices: no yes	Do exact matching of communities
				name list / elements=string				Community-list number/Community-list name Please refer vendor documentation for valid values
			extcommunity list / elements=string					Match BGP/VPN extended community list Extended community-list number Please refer vendor documentation for valid values
			interfaces list / elements=string					Match first hop interface of route
			ip dictionary					IP specific information
				address dictionary				Match address of route or match packet
					acls list / elements=string			Match entries of acl IP acl name/number Please refer vendor documentation for valid values
					prefix_lists list / elements=string			Match entries of prefix-lists IP prefix-list name
				flowspec dictionary				Match src/dest prefix component of flowspec prefix
					acls list / elements=string			Match entries of acl IP acl name/number Please refer vendor documentation for valid values
					dest_pfx boolean		Choices: no yes	Match dest prefix component of flowspec prefix
					prefix_lists list / elements=string			Match entries of prefix-lists IP prefix-list name
					src_pfx boolean		Choices: no yes	Match source prefix component of flowspec prefix
				next_hop dictionary				Match next-hop address of route
					acls list / elements=string			Match entries of acl IP acl name/number Please refer vendor documentation for valid values
					prefix_lists list / elements=string			Match entries of prefix-lists IP prefix-list name
					set boolean		Choices: no yes	Set next-hop address
				redistribution_source dictionary				route redistribution source (EIGRP only)
					acls list / elements=string			Match entries of acl IP acl name/number Please refer vendor documentation for valid values
					prefix_lists list / elements=string			Match entries of prefix-lists IP prefix-list name
					set boolean		Choices: no yes	Set redistribution-source
				route_source dictionary				Match advertising source address of route
					acls list / elements=string			Match entries of acl IP acl name/number Please refer vendor documentation for valid values
					prefix_lists list / elements=string			Match entries of prefix-lists IP prefix-list name
					redistribution_source boolean		Choices: no yes	route redistribution source (EIGRP only)
					set boolean		Choices: no yes	Set redistribution-source
			ipv6 dictionary					IPv6 specific information
				address dictionary				Match address of route or match packet
					acl string			IPv6 access-list name
					prefix_list string			IPv6 prefix-list name
				flowspec dictionary				Match next-hop address of route
					acl string			IPv6 access-list name
					dest_pfx boolean		Choices: no yes	Match dest prefix component of flowspec prefix
					prefix_list string			IPv6 prefix-list name
					src_pfx boolean		Choices: no yes	Match source prefix component of flowspec prefix
				next_hop dictionary				Match next-hop address of route
					acl string			IPv6 access-list name
					prefix_list string			IPv6 prefix-list name
				route_source dictionary				Match advertising source address of route
					acl string			IPv6 access-list name
					prefix_list string			IPv6 prefix-list name
			length dictionary					Packet length
				maximum integer				Maximum packet length Please refer vendor documentation for valid values
				minimum integer				Minimum packet length Please refer vendor documentation for valid values
			local_preference dictionary					Local preference for route
				set boolean			Choices: no yes	Set the Local preference for route
				value list / elements=string				Local preference value Please refer vendor documentation for valid values
			mdt_group dictionary					Match routes corresponding to MDT group
				acls list / elements=string				IP access-list number/IP standard access-list name Please refer vendor documentation for valid values
				set boolean			Choices: no yes	Set and Match routes corresponding to MDT group
			metric dictionary					Match metric of route
				deviation boolean			Choices: no yes	Deviation option to match metric in a range
				deviation_value integer				deviation value, 500 +- 10 creates the range 490 - 510 Please refer vendor documentation for valid values
				external boolean			Choices: no yes	Match route using external protocol metric
				value integer				Metric value Please refer vendor documentation for valid values
			mpls_label boolean				Choices: no yes	Match routes which have MPLS labels
			policy_lists list / elements=string					Match IP policy list
			route_type dictionary					Match route-type of route
				external dictionary				external route (BGP, EIGRP and OSPF type 1/2)
					set boolean		Choices: no yes	Set external route
					type_1 boolean		Choices: no yes	OSPF external type 1 route
					type_2 boolean		Choices: no yes	OSPF external type 2 route
				internal boolean			Choices: no yes	internal route (including OSPF intra/inter area)
				level_1 boolean			Choices: no yes	IS-IS level-1 route
				level_2 boolean			Choices: no yes	IS-IS level-2 route
				local boolean			Choices: no yes	locally generated route
				nssa_external dictionary				nssa-external route (OSPF type 1/2)
					set boolean		Choices: no yes	Set nssa-external route
					type_1 boolean		Choices: no yes	OSPF external type 1 route
					type_2 boolean		Choices: no yes	OSPF external type 2 route
			rpki dictionary					Match RPKI state of route
				invalid boolean			Choices: no yes	RPKI Invalid State
				not_found boolean			Choices: no yes	RPKI Not Found State
				valid boolean			Choices: no yes	RPKI Valid State
			security_group dictionary					Security Group
				destination list / elements=integer				Destination Security Group, destination Security tag Please refer vendor documentation for valid values
				source list / elements=integer				Source Security Group, source Security tag Please refer vendor documentation for valid values
			source_protocol dictionary					Match source-protocol of route
				bgp string				Border Gateway Protocol (BGP) Autonomous system number Please refer vendor documentation for valid values
				connected boolean			Choices: no yes	Connected
				eigrp integer				Enhanced Interior Gateway Routing Protocol (EIGRP) Autonomous system number Please refer vendor documentation for valid values
				isis boolean			Choices: no yes	ISO IS-IS
				lisp boolean			Choices: no yes	Locator ID Separation Protocol (LISP)
				mobile boolean			Choices: no yes	Mobile routes
				ospf integer				Open Shortest Path First (OSPF) Process ID Please refer vendor documentation for valid values
				ospfv3 integer				OSPFv3 Process ID Please refer vendor documentation for valid values
				rip boolean			Choices: no yes	Routing Information Protocol (RIP)
				static boolean			Choices: no yes	Static routes
			tag dictionary					Match tag of route
				tag_list list / elements=string				Route Tag List/Tag list name
				value list / elements=string				Tag value/Tag in Dotted Decimal eg, 10.10.10.10
			track integer					tracking object
		sequence integer						Sequence to insert to/delete from existing route-map entry Please refer vendor documentation for valid values
		set dictionary						Match source-protocol of route
			aigp_metric dictionary					accumulated metric value
				igp_metric boolean			Choices: no yes	metric value from rib
				value integer				manual value
			as_path dictionary					Prepend string for a BGP AS-path attribute
				prepend dictionary				Prepend to the as-path
					as_number list / elements=string			AS number Please refer vendor documentation for valid values
					last_as integer			Prepend last AS to the as-path Number of last-AS prepends Please refer vendor documentation for valid values
				tag boolean			Choices: no yes	Set the tag as an AS-path attribute
			automatic_tag boolean				Choices: no yes	Automatically compute TAG value
			clns string					OSI summary address Next hop address CLNS summary prefix
			comm_list string					set BGP community list (for deletion) Community-list name/number Delete matching communities
			community dictionary					BGP community attribute
				additive boolean			Choices: no yes	Add to the existing community
				gshut boolean			Choices: no yes	Graceful Shutdown (well-known community)
				internet boolean			Choices: no yes	Internet (well-known community)
				local_as boolean			Choices: no yes	Do not send outside local AS (well-known community)
				no_advertise boolean			Choices: no yes	Do not advertise to any peer (well-known community)
				no_export boolean			Choices: no yes	Do not export to next AS (well-known community)
				none boolean			Choices: no yes	No community attribute
				number string				community number community number in aa:nn format Please refer vendor documentation for valid values
			dampening dictionary					Set BGP route flap dampening parameters
				max_suppress integer				Maximum duration to suppress a stable route Please refer vendor documentation for valid values
				penalty_half_time integer				half-life time for the penalty Please refer vendor documentation for valid values
				reuse_route_val integer				Penalty to start reusing a route Please refer vendor documentation for valid values
				suppress_route_val integer				Penalty to start suppressing a route Please refer vendor documentation for valid values
			default string					Set default information Default output interface
			extcomm_list string					Set BGP/VPN extended community list (for deletion) Extended community-list number/name Delete matching extended communities
			extcommunity dictionary					BGP extended community attribute
				cost dictionary				Cost extended community
					cost_value integer			Cost Value (No-preference Cost = 2147483647) Please refer vendor documentation for valid values
					id string			Community ID Please refer vendor documentation for valid values
					igp boolean		Choices: no yes	Compare following IGP cost comparison
					pre_bestpath boolean		Choices: no yes	Compare before all other steps in bestpath calculation
				rt dictionary				Route Target extended community
					additive boolean		Choices: no yes	Add to the existing extcommunity
					address string			VPN extended community
					range dictionary			Specify a range of extended community
						lower_limit string		VPN extended community
						upper_limit string		VPN extended community
				soo string				Site-of-Origin extended community
				vpn_distinguisher dictionary				VPN Distinguisher
					additive boolean		Choices: no yes	Add to the existing extcommunity
					address string			VPN extended community
					range dictionary			Specify a range of extended community
						lower_limit string		VPN extended community
						upper_limit string		VPN extended community
			global_route boolean				Choices: no yes	Set to global routing table
			interfaces list / elements=string					Output interface
			ip dictionary					IP specific information
				address string				Specify IP address Prefix-list name to set ip address
				df integer			Choices: 0 1	Set DF bit
				global_route dictionary				global routing table
					address string			IP address of next hop
					verify_availability dictionary			Verify if nexthop is reachable
						address string		IP address of next hop
						sequence integer		Sequence to insert into next-hop list Please refer vendor documentation for valid values
						track integer		Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
				next_hop dictionary				Next hop address
					address string			IP address of next hop
					dynamic boolean		Choices: no yes	application dynamically sets next hop DHCP learned next hop
					encapsulate string			Encapsulation profile for VPN nexthop L3VPN Encapsulation profile name
					peer_address boolean		Choices: no yes	Use peer address (for BGP only)
					recursive dictionary			Recursive next-hop
						address string		IP address of recursive next hop
						global_route boolean	Choices: no yes	global routing table
						vrf string		VRF
					self boolean		Choices: no yes	Use self address (for BGP only)
					verify_availability dictionary			Verify if nexthop is reachable
						address string		IP address of next hop
						sequence integer		Sequence to insert into next-hop list Please refer vendor documentation for valid values
						set boolean	Choices: no yes	Set and Verify if nexthop is reachable
						track integer		Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
				precedence dictionary				Set precedence field
					critical boolean		Choices: no yes	Set critical precedence (5)
					flash boolean		Choices: no yes	Set flash precedence (3)
					flash_override boolean		Choices: no yes	Set flash override precedence (4)
					immediate boolean		Choices: no yes	Set immediate precedence (2)
					internet boolean		Choices: no yes	Set internetwork control precedence (6)
					network boolean		Choices: no yes	Set network control precedence (7)
					priority boolean		Choices: no yes	Set priority precedence (1)
					routine boolean		Choices: no yes	Set routine precedence (0)
					set boolean		Choices: no yes	Just set precedence field
				qos_group integer				Set QOS Group ID Please refer vendor documentation for valid values
				tos dictionary				Set type of service field
					max_reliability boolean		Choices: no yes	Set max reliable TOS (2)
					max_throughput boolean		Choices: no yes	Set max throughput TOS (4)
					min_delay boolean		Choices: no yes	Set min delay TOS (8)
					min_monetary_cost boolean		Choices: no yes	Set min monetary cost TOS (1)
					normal boolean		Choices: no yes	Set normal TOS (0)
					set boolean		Choices: no yes	Just set type of service field
				vrf dictionary				VRF
					address string			IP address of next hop
					name string			VRF name
					verify_availability dictionary			Verify if nexthop is reachable
						address string		IP address of next hop
						sequence integer		Sequence to insert into next-hop list Please refer vendor documentation for valid values
						set boolean	Choices: no yes	Set and Verify if nexthop is reachable
						track integer		Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
			ipv6 dictionary					IPv6 specific information
				address string				IPv6 address IPv6 prefix-list
				default boolean			Choices: no yes	Set default information
				global_route dictionary				global routing table
					address string			Next hop address (X:X:X:X::X)
					verify_availability dictionary			Verify if nexthop is reachable
						address string		Next hop address (X:X:X:X::X)
						sequence integer		Sequence to insert into next-hop list Please refer vendor documentation for valid values
						track integer		Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
				next_hop dictionary				IPv6 Next hop
					address string			Next hop address (X:X:X:X::X)
					encapsulate string			Encapsulation profile for VPN nexthop L3VPN Encapsulation profile name
					peer_address boolean		Choices: no yes	Use peer address (for BGP only)
					recursive string			Recursive next-hop IPv6 address of recursive next-hop
				precedence integer				Set precedence field Precedence value Please refer vendor documentation for valid values
				vrf dictionary				VRF name
					name string			VRF name
					verify_availability dictionary			Verify if nexthop is reachable
						address string		IPv6 address of next hop
						sequence integer		Sequence to insert into next-hop list Please refer vendor documentation for valid values
						track integer		Set the next hop depending on the state of a tracked object tracked object number Please refer vendor documentation for valid values
			level dictionary					Where to import route
				level_1 boolean			Choices: no yes	Import into a level-1 area
				level_1_2 boolean			Choices: no yes	Import into level-1 and level-2
				level_2 boolean			Choices: no yes	Import into level-2 sub-domain
				nssa_only boolean			Choices: no yes	Import only into OSPF NSSA areas and don't propagate
			lisp string					Locator ID Separation Protocol specific information Specify a locator-set to use in LISP route-import The name of the locator set
			local_preference integer					BGP local preference path attribute Please refer vendor documentation for valid values
			metric dictionary					Metric value for destination routing protocol
				deviation string			Choices: plus minus	Add or subtract metric
				eigrp_delay integer				EIGRP delay metric, in 10 microsecond units Please refer vendor documentation for valid values
				metric_bandwidth integer				EIGRP Effective bandwidth metric (Loading) where 255 is 100 loaded Please refer vendor documentation for valid values
				metric_reliability integer				EIGRP reliability metric where 255 is 100 reliable Please refer vendor documentation for valid values
				metric_value integer				Metric value or Bandwidth in Kbits per second Please refer vendor documentation for valid values
				mtu integer				EIGRP MTU of the path Please refer vendor documentation for valid values
			metric_type dictionary					Type of metric for destination routing protocol
				external boolean			Choices: no yes	IS-IS external metric
				internal boolean			Choices: no yes	IS-IS internal metric or Use IGP metric as the MED for BGP
				type_1 boolean			Choices: no yes	OSPF external type 1 metric
				type_2 boolean			Choices: no yes	OSPF external type 2 metric
			mpls_label boolean				Choices: no yes	Set MPLS label for prefix
			origin dictionary					BGP origin code
				igp boolean			Choices: no yes	local IGP
				incomplete boolean			Choices: no yes	unknown heritage
			tag string					Tag value for destination routing protocol Tag value A.B.C.D(dotted decimal format)/Tag value
			traffic_index integer					BGP traffic classification number for accounting Please refer vendor documentation for valid values
			vrf string					Define VRF name VPN Routing/Forwarding instance name
			weight integer					BGP weight for routing table Please refer vendor documentation for valid values
	route_map string							Route map tag/name
running_config string								This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^route-map. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string							Choices: merged ← replaced overridden deleted gathered parsed rendered	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command sh running-config \| section ^route-map executed on device. For state parsed active connection to remote host is not required.

Notes

Note

Tested against Cisco IOSv Version 15.2 on VIRL
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html

Examples

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Delete provided Route maps config
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
    state: deleted

#  Commands Fired:
#  ---------------
#
#  "commands": [
#         "no route-map test_1"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^route-map
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using deleted without any config passed (NOTE: This will delete all Route maps configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Delete all Route maps config
  cisco.ios.ios_route_maps:
    state: deleted

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no route-map test_1",
#         "no route-map test_2"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^route-map
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# router-ios#

- name: Merge provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is test route
            match:
              ip:
                next_hop:
                  prefix_lists:
                    - test_1_new
                    - test_2_new
                route_source:
                  acls:
                    - 10
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 50
                  - 100
              mpls_label: true
          - sequence: 20
            action: deny
            continue_entry:
              entry_sequence: 100
            match:
              additional_paths:
                all: true
                group_best: true
              as_path:
                acls:
                  - 100
                  - 200
              ipv6:
                address:
                  acl: test_acl_20
              route_type:
                level_1: true
              tag:
                tag_list:
                  - test_match_tag
              track: 105
      - route_map: test_2
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_ip_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 55
                  - 105
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.51.110.1
                  verify_availability:
                    address: 198.51.111.1
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: merged

#  Commands Fired:
#  ---------------
#
#   "commands": [
#      "route-map test_2 deny 10",
#      "match security-group source tag 10 20",
#      "match local-preference 55 105",
#      "match mpls-label",
#      "match ipv6 next-hop prefix-list test_new",
#      "match ipv6 route-source route_src_acl",
#      "match ipv6 address test_ip_acl",
#      "set extcommunity cost pre-bestpath 10 100",
#      "set ip df 1",
#      "set ip next-hop recursive global 198.51.110.1",
#      "set ip next-hop verify-availability 198.51.111.1 100 track 10",
#      "set ip precedence critical",
#      "set ip address prefix-list 192.0.2.1",
#      "set automatic-tag",
#      "set aigp-metric 100",
#      "route-map test_1 deny 20",
#      "continue 100",
#      "match track 105",
#      "match tag list test_match_tag",
#      "match ipv6 address test_acl_20",
#      "match route-type level-1",
#      "match as-path 200 100",
#      "match additional-paths advertise-set all group-best",
#      "route-map test_1 deny 10",
#      "description this is test route",
#      "match security-group source tag 10 20",
#      "match ip next-hop prefix-list test_2_new test_1_new",
#      "match ip route-source 10",
#      "match local-preference 100 50",
#      "match mpls-label"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Override provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is override route
            match:
              ip:
                next_hop:
                  acls:
                    - 10
                    - test1_acl
                flowspec:
                  dest_pfx: true
                  acls:
                    - test_acl_1
                    - test_acl_2
              length:
                minimum: 10
                maximum: 100
              metric:
                value: 10
                external: true
              security_group:
                source:
                  - 10
                  - 20
              mpls_label: true
            set:
              extcommunity:
                vpn_distinguisher:
                  address: 192.0.2.1:12
                  additive: true
              metric:
                metric_value: 100
                deviation: plus
                eigrp_delay: 100
                metric_reliability: 10
                metric_bandwidth: 20
                mtu: 30
      - route_map: test_override
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 15
                  - 20
              local_preference:
                value:
                  - 105
                  - 110
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.110.51.1
                  verify_availability:
                    address: 198.110.51.2
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: overridden

# Commands Fired:
# ---------------
#
#  "commands": [
#         "no route-map test_2",
#         "route-map test_override deny 10",
#         "match security-group source tag 15 20",
#         "match local-preference 110 105",
#         "match mpls-label",
#         "match ipv6 next-hop prefix-list test_new",
#         "match ipv6 route-source route_src_acl",
#         "match ipv6 address test_acl",
#         "set extcommunity cost pre-bestpath 10 100",
#         "set ip df 1",
#         "set ip next-hop recursive global 198.110.51.1",
#         "set ip next-hop verify-availability 198.110.51.2 100 track 10",
#         "set ip precedence critical",
#         "set ip address prefix-list 192.0.2.1",
#         "set automatic-tag",
#         "set aigp-metric 100",
#         "route-map test_1 deny 10",
#         "no description this is test route",
#         "description this is override route",
#         "match ip flowspec dest-pfx test_acl_1 test_acl_2",
#         "no match ip next-hop prefix-list test_2_new test_1_new",
#         "match ip next-hop test1_acl 10",
#         "no match ip route-source 10",
#         "match metric external 10",
#         "match length 10 100",
#         "no match local-preference 100 50",
#         "set extcommunity vpn-distinguisher 192.0.2.1:12 additive",
#         "set metric 100 +100 10 20 30",
#         "no route-map test_1 deny 20"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_override deny 10
#  match security-group source tag 15 20
#  match local-preference 110 105
#  match mpls-label
#  match ipv6 address test_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.110.51.2 100 track 10
#  set ip next-hop recursive global 198.110.51.1
# route-map test_1 deny 10
#  description this is override route
#  match ip flowspec dest-pfx test_acl_1 test_acl_2
#  match ip next-hop test1_acl 10
#  match security-group source tag 10 20
#  match metric external 10
#  match mpls-label
#  match length 10 100
#  set metric 100 +100 10 20 30
#  set extcommunity vpn-distinguisher 192.0.2.1:12 additive

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Replaced provided Route maps configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is replaced route
            match:
              ip:
                next_hop:
                  acls:
                    - 10
                    - test1_acl
                flowspec:
                  dest_pfx: true
                  acls:
                    - test_acl_1
                    - test_acl_2
              length:
                minimum: 10
                maximum: 100
              metric:
                value: 10
                external: true
              security_group:
                source:
                  - 10
                  - 20
              mpls_label: true
            set:
              extcommunity:
                vpn_distinguisher:
                  address: 192.0.2.1:12
                  additive: true
              metric:
                metric_value: 100
                deviation: plus
                eigrp_delay: 100
                metric_reliability: 10
                metric_bandwidth: 20
                mtu: 30
      - route_map: test_replaced
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 15
                  - 20
              local_preference:
                value:
                  - 105
                  - 110
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.110.51.1
                  verify_availability:
                    address: 198.110.51.2
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: replaced

# Commands Fired:
# ---------------
#  "commands": [
#         "route-map test_replaced deny 10",
#         "match security-group source tag 15 20",
#         "match local-preference 110 105",
#         "match mpls-label",
#         "match ipv6 next-hop prefix-list test_new",
#         "match ipv6 route-source route_src_acl",
#         "match ipv6 address test_acl",
#         "set extcommunity cost pre-bestpath 10 100",
#         "set ip df 1",
#         "set ip next-hop recursive global 198.110.51.1",
#         "set ip next-hop verify-availability 198.110.51.2 100 track 10",
#         "set ip precedence critical",
#         "set ip address prefix-list 192.0.2.1",
#         "set automatic-tag",
#         "set aigp-metric 100",
#         "route-map test_1 deny 10",
#         "no description this is test route",
#         "description this is replaced route",
#         "match ip flowspec dest-pfx test_acl_1 test_acl_2",
#         "no match ip next-hop prefix-list test_2_new test_1_new",
#         "match ip next-hop test1_acl 10",
#         "no match ip route-source 10",
#         "match metric external 10",
#         "match length 10 100",
#         "no match local-preference 100 50",
#         "set extcommunity vpn-distinguisher 192.0.2.1:12 additive",
#         "set metric 100 +100 10 20 30",
#         "no route-map test_1 deny 20"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_replaced deny 10
#  match security-group source tag 15 20
#  match local-preference 110 105
#  match mpls-label
#  match ipv6 address test_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.110.51.2 100 track 10
#  set ip next-hop recursive global 198.110.51.1
# route-map test_1 deny 10
#  description this is replaced route
#  match ip flowspec dest-pfx test_acl_1 test_acl_2
#  match ip next-hop test1_acl 10
#  match security-group source tag 10 20
#  match metric external 10
#  match mpls-label
#  match length 10 100
#  set metric 100 +100 10 20 30
#  set extcommunity vpn-distinguisher 192.0.2.1:12 additive
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Gather Route maps provided configurations
  cisco.ios.ios_route_maps:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "description": "this is test route",
#                     "match": {
#                         "ip": {
#                             "next_hop": {
#                                 "prefix_lists": [
#                                     "test_2_new",
#                                     "test_1_new"
#                                 ]
#                             },
#                             "route_source": {
#                                 "acls": [
#                                     "10"
#                                 ]
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "100",
#                                 "50"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10
#                 },
#                 {
#                     "action": "deny",
#                     "continue_entry": {
#                         "entry_sequence": 100
#                     },
#                     "match": {
#                         "additional_paths": {
#                             "all": true,
#                             "group_best": true
#                         },
#                         "as_path": {
#                             "acls": [
#                                 200,
#                                 100
#                             ]
#                         },
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_acl_20"
#                             }
#                         },
#                         "route_type": {
#                             "external": {
#                                 "set": true
#                             },
#                             "level_1": true,
#                             "nssa_external": {
#                                 "set": true
#                             }
#                         },
#                         "tag": {
#                             "tag_list": [
#                                 "test_match_tag"
#                             ]
#                         },
#                         "track": 105
#                     },
#                     "sequence": 20
#                 }
#             ],
#             "route_map": "test_1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "match": {
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_ip_acl"
#                             },
#                             "next_hop": {
#                                 "prefix_list": "test_new"
#                             },
#                             "route_source": {
#                                 "acl": "route_src_acl"
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "55",
#                                 "105"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10,
#                     "set": {
#                         "aigp_metric": {
#                             "value": 100
#                         },
#                         "automatic_tag": true,
#                         "extcommunity": {
#                             "cost": {
#                                 "cost_value": 100,
#                                 "id": "10",
#                                 "pre_bestpath": true
#                             }
#                         },
#                         "ip": {
#                             "address": "192.0.2.1",
#                             "df": 1,
#                             "next_hop": {
#                                 "recursive": {
#                                     "address": "198.51.110.1",
#                                     "global_route": true
#                                 },
#                                 "verify_availability": {
#                                     "address": "198.51.111.1",
#                                     "sequence": 100,
#                                     "track": 10
#                                 }
#                             },
#                             "precedence": {
#                                 "critical": true
#                             }
#                         }
#                     }
#                 }
#             ],
#             "route_map": "test_2"
#         }
#     ]

# After state:
# ------------
#
# router-ios#sh running-config | section ^route-map
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_route_maps:
    config:
      - route_map: test_1
        entries:
          - sequence: 10
            action: deny
            description: this is test route
            match:
              ip:
                next_hop:
                  prefix_lists:
                    - test_1_new
                    - test_2_new
                route_source:
                  acls:
                    - 10
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 50
                  - 100
              mpls_label: true
          - sequence: 20
            action: deny
            continue_entry:
              entry_sequence: 100
            match:
              additional_paths:
                all: true
                group_best: true
              as_path:
                acls:
                  - 100
                  - 200
              ipv6:
                address:
                  acl: test_acl_20
              route_type:
                level_1: true
              tag:
                tag_list:
                  - test_match_tag
              track: 105
      - route_map: test_2
        entries:
          - sequence: 10
            action: deny
            match:
              ipv6:
                address:
                  acl: test_ip_acl
                next_hop:
                  prefix_list: test_new
                route_source:
                  acl: route_src_acl
              security_group:
                source:
                  - 10
                  - 20
              local_preference:
                value:
                  - 55
                  - 105
              mpls_label: true
            set:
              aigp_metric:
                value: 100
              automatic_tag: true
              extcommunity:
                cost:
                  id: 10
                  cost_value: 100
                  pre_bestpath: true
              ip:
                address: 192.0.2.1
                df: 1
                next_hop:
                  recursive:
                    global_route: true
                    address: 198.51.110.1
                  verify_availability:
                    address: 198.51.111.1
                    sequence: 100
                    track: 10
                precedence:
                  critical: true
    state: rendered

# Module Execution Result:
# ------------------------
#
#  "rendered": [
#      "route-map test_2 deny 10",
#      "match security-group source tag 10 20",
#      "match local-preference 55 105",
#      "match mpls-label",
#      "match ipv6 next-hop prefix-list test_new",
#      "match ipv6 route-source route_src_acl",
#      "match ipv6 address test_ip_acl",
#      "set extcommunity cost pre-bestpath 10 100",
#      "set ip df 1",
#      "set ip next-hop recursive global 198.51.110.1",
#      "set ip next-hop verify-availability 198.51.111.1 100 track 10",
#      "set ip precedence critical",
#      "set ip address prefix-list 192.0.2.1",
#      "set automatic-tag",
#      "set aigp-metric 100",
#      "route-map test_1 deny 20",
#      "continue 100",
#      "match track 105",
#      "match tag list test_match_tag",
#      "match ipv6 address test_acl_20",
#      "match route-type level-1",
#      "match as-path 200 100",
#      "match additional-paths advertise-set all group-best",
#      "route-map test_1 deny 10",
#      "description this is test route",
#      "match security-group source tag 10 20",
#      "match ip next-hop prefix-list test_2_new test_1_new",
#      "match ip route-source 10",
#      "match local-preference 100 50",
#      "match mpls-label"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# route-map test_1 deny 10
#  description this is test route
#  match ip next-hop prefix-list test_2_new test_1_new
#  match ip route-source 10
#  match security-group source tag 10 20
#  match local-preference 100 50
#  match mpls-label
# route-map test_1 deny 20
#  match track  105
#  match tag list test_match_tag
#  match route-type level-1
#  match additional-paths advertise-set all group-best
#  match as-path 200 100
#  match ipv6 address test_acl_20
#  continue 100
# route-map test_2 deny 10
#  match security-group source tag 10 20
#  match local-preference 55 105
#  match mpls-label
#  match ipv6 address test_ip_acl
#  match ipv6 next-hop prefix-list test_new
#  match ipv6 route-source route_src_acl
#  set automatic-tag
#  set ip precedence critical
#  set ip address prefix-list 192.0.2.1
#  set aigp-metric 100
#  set extcommunity cost pre-bestpath 10 100
#  set ip df 1
#  set ip next-hop verify-availability 198.51.111.1 100 track 10
#  set ip next-hop recursive global 198.51.110.1

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_route_maps:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "description": "this is test route",
#                     "match": {
#                         "ip": {
#                             "next_hop": {
#                                 "prefix_lists": [
#                                     "test_2_new",
#                                     "test_1_new"
#                                 ]
#                             },
#                             "route_source": {
#                                 "acls": [
#                                     "10"
#                                 ]
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "100",
#                                 "50"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10
#                 },
#                 {
#                     "action": "deny",
#                     "continue_entry": {
#                         "entry_sequence": 100
#                     },
#                     "match": {
#                         "additional_paths": {
#                             "all": true,
#                             "group_best": true
#                         },
#                         "as_path": {
#                             "acls": [
#                                 200,
#                                 100
#                             ]
#                         },
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_acl_20"
#                             }
#                         },
#                         "route_type": {
#                             "external": {
#                                 "set": true
#                             },
#                             "level_1": true,
#                             "nssa_external": {
#                                 "set": true
#                             }
#                         },
#                         "tag": {
#                             "tag_list": [
#                                 "test_match_tag"
#                             ]
#                         },
#                         "track": 105
#                     },
#                     "sequence": 20
#                 }
#             ],
#             "route_map": "test_1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "deny",
#                     "match": {
#                         "ipv6": {
#                             "address": {
#                                 "acl": "test_ip_acl"
#                             },
#                             "next_hop": {
#                                 "prefix_list": "test_new"
#                             },
#                             "route_source": {
#                                 "acl": "route_src_acl"
#                             }
#                         },
#                         "local_preference": {
#                             "value": [
#                                 "55",
#                                 "105"
#                             ]
#                         },
#                         "mpls_label": true,
#                         "security_group": {
#                             "source": [
#                                 10,
#                                 20
#                             ]
#                         }
#                     },
#                     "sequence": 10,
#                     "set": {
#                         "aigp_metric": {
#                             "value": 100
#                         },
#                         "automatic_tag": true,
#                         "extcommunity": {
#                             "cost": {
#                                 "cost_value": 100,
#                                 "id": "10",
#                                 "pre_bestpath": true
#                             }
#                         },
#                         "ip": {
#                             "address": "192.0.2.1",
#                             "df": 1,
#                             "next_hop": {
#                                 "recursive": {
#                                     "address": "198.51.110.1",
#                                     "global_route": true
#                                 },
#                                 "verify_availability": {
#                                     "address": "198.51.111.1",
#                                     "sequence": 100,
#                                     "track": 10
#                                 }
#                             },
#                             "precedence": {
#                                 "critical": true
#                             }
#                         }
#                     }
#                 }
#             ],
#             "route_map": "test_2"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['route-map test_1 deny 10', 'description this is test route', 'match ip route-source 10', 'match track 105']

Authors

Sumit Jaiswal (@justjais)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/ios/ios_route_maps_module.html

Docs

Docs4dev

Title here

cisco.ios.ios_route_maps – Route maps resource module

Synopsis

Parameters

Notes

Examples

Return Values

Authors