cisco.iosxr.iosxr_ospfv3 – ospfv3 resource module

Note

This plugin is part of the cisco.iosxr collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ospfv3.

New in version 1.1.0: of cisco.iosxr

Synopsis

This module manages global ospfv3 configuration on devices running Cisco IOS-XR

Note

This module has a corresponding action plugin.

Parameters

Parameter										Choices/Defaults	Comments
config dictionary											A list of ospfv3 process configuration
	processes list / elements=dictionary										A list of ospfv3 instances configuration
		address_family_unicast boolean								Choices: no yes	Enable unicast topology for ipv4 address family
		areas list / elements=dictionary									Configure ospfv3 areas' properties
			area_id string / required								Area ID as IP address or integer
			authentication dictionary								Enable authentication
				disable boolean						Choices: no ← yes	Do not authenticate OSPFv3 packets
				ipsec dictionary							Specify IPSec AH authentication attributes
					algorithim_type string					Choices: md5 sha1	Specify the type of algorithim
					clear_key string						Specify key in cleartext form
					key string						Specify key
					password_key string						Specify key in encrypted form
					spi integer						Specify the Security Parameter Index value
			bfd dictionary								Configure BFD parameters
				fast_detect dictionary							Configure fast detection
					set boolean					Choices: no yes	Enable fast detection only
					strict_mode boolean					Choices: no yes	Hold down neighbor session until BFD session is up
				minimum_interval integer							Hello interval in milli-seconds
				multiplier integer							Detect multiplier
			cost integer								Interface cost
			database_filter dictionary								Filter LSAs during synchronization and flooding
				all_outgoing_lsa boolean						Choices: no yes	Filter all outgoing LSA
			dead_interval integer								Interval after which a neighbor is declared dead
			default_cost integer								Set the summary default-cost of a NSSA/stub area. Stub's advertised external route metric
			demand_circuit boolean							Choices: no yes	Enable/Disable ospfv3 demand circuit
			distrinbute_rib_prefix_list_name string								Filter LSAs during synchronization and flooding
			encryption dictionary								Encrypt and authenticate OSPFv3 packets
				disable boolean						Choices: no ← yes	Do not encrypt OSPFv3 packets
				ipsec dictionary							Specify IPSec ESP encryption and authentication
					esp dictionary						Specify encryption parameters
						aes dictionary					This specify the aes algorithim
							algorithim_type string			Choices: 192 256	Specify the bit encryption for aes algorithim
							clear_key string				Specify AES key in cleartext form
							key string				Cleartext AES key
							password_key string				Specify AES key in encrypted form
						des dictionary					This specify the des algorithim
							clear_key string				Specify AES key in cleartext form
							key string				Cleartext AES key
							password_key string				Specify AES key in encrypted form
						null_encryption dictionary					Specify null encryption attributes
							authentication dictionary				Specify authentication parameters
								algorithim_type string		Choices: md5 sha1	Specify the type of algorithim
								clear_key string			Specify key in cleartext form
								key string			Specify key
								password_key string			Specify key in encrypted form
						triple_des dictionary					This specify the triple DES algorithim
							clear_key string				Specify 3DES key in cleartext form
							key string				Cleartext 3DES key
							password_key string				Specify 3DES key in encrypted form
					spi integer						Specify the Security Parameter Index value
			fast_reroute dictionary								Specify IP Fast Reroute
				disabled boolean						Choices: no yes	Disable IP fast reroute
				per_link dictionary							Specify per-prefix computation
					information_type string					Choices: exclude lfa_candidate	Specify per-link LFA exclusion or FRR LFA candidate information
					interface dictionary						Specify Per-link LFA exclusion information
						bundle_ether list / elements=integer					Specify Aggregated Ethernet interface(s)
						bvi list / elements=integer					Specify Bridge-Group Virtual Interface
						fast_ethernet list / elements=string					Specify FastEthernet/IEEE 802.3 interface(s)
						fiftygige list / elements=string					Specify FiftyGigE/IEEE 802.3 interface(s)
						fortygige list / elements=string					Specify FortyGigE/IEEE 802.3 interface(s)
						fourhundredgige list / elements=string					Specify FourHundredGigE/IEEE 802.3 interface(s)
						gigabitethernet list / elements=string					Specify GigabitEthernet/IEEE 802.3 interface(s)
						hundredgige list / elements=string					Specify HundredGigE/IEEE 802.3 interface(s)
						mgmteth list / elements=string					Specify MgmtEth/IEEE 802.3 interface(s)
						multilink list / elements=string					Specify Multilink network interface(s)
						nve list / elements=integer					Specify Network Virtualization Endpoint Interface(s)
						pos_int list / elements=integer					Specify Aggregated pos interface(s)
						pw_ether list / elements=integer					Specify PWHE Ethernet Interface
						pw_iw list / elements=integer					Specify PWHE VC11 IP Interworking Interface
						serial list / elements=string					Specify Serial network interface(s)
						srp list / elements=string					Specify SRP interface(s)
						tengige list / elements=string					Specify TenGigabitEthernet/IEEE 802.3 interface(s)
						tunnel_ip list / elements=integer					Specify GRE/IPinIP Tunnel Interface(s)
						tunnel_ipsec list / elements=integer					Specify IPSec Tunnel interface(s)
						tunnel_mpls integer					MPLS Transport Protocol Tunnel interface
						tunnel_mte list / elements=integer					Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
						twentyfivegige list / elements=string					Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
						twohundredgige list / elements=string					Specify TwoHundredGigE/IEEE 802.3 interface(s)
					use_candidate_only boolean					Choices: no yes	Enable/Disable backup selection from candidate-list only
				per_prefix dictionary							Specify per-prefix computation
					information_type string					Choices: exclude lfa_candidate	Specify per_prefix LFA exclusion or FRR LFA candidate information
					interface dictionary						Specify Per-link LFA exclusion information
						bundle_ether list / elements=integer					Specify Aggregated Ethernet interface(s)
						bvi list / elements=integer					Specify Bridge-Group Virtual Interface
						fast_ethernet list / elements=string					Specify FastEthernet/IEEE 802.3 interface(s)
						fiftygige list / elements=string					Specify FiftyGigE/IEEE 802.3 interface(s)
						fortygige list / elements=string					Specify FortyGigE/IEEE 802.3 interface(s)
						fourhundredgige list / elements=string					Specify FourHundredGigE/IEEE 802.3 interface(s)
						gigabitethernet list / elements=string					Specify GigabitEthernet/IEEE 802.3 interface(s)
						hundredgige list / elements=string					Specify HundredGigE/IEEE 802.3 interface(s)
						mgmteth list / elements=string					Specify MgmtEth/IEEE 802.3 interface(s)
						multilink list / elements=string					Specify Multilink network interface(s)
						nve list / elements=integer					Specify Network Virtualization Endpoint Interface(s)
						pos_int list / elements=integer					Specify Aggregated pos interface(s)
						pw_ether list / elements=integer					Specify PWHE Ethernet Interface
						pw_iw list / elements=integer					Specify PWHE VC11 IP Interworking Interface
						serial list / elements=string					Specify Serial network interface(s)
						srp list / elements=string					Specify SRP interface(s)
						tengige list / elements=string					Specify TenGigabitEthernet/IEEE 802.3 interface(s)
						tunnel_ip list / elements=integer					Specify GRE/IPinIP Tunnel Interface(s)
						tunnel_ipsec list / elements=integer					Specify IPSec Tunnel interface(s)
						tunnel_mpls integer					MPLS Transport Protocol Tunnel interface
						tunnel_mte list / elements=integer					Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
						twentyfivegige list / elements=string					Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
						twohundredgige list / elements=string					Specify TwoHundredGigE/IEEE 802.3 interface(s)
					use_candidate_only boolean					Choices: no yes	Enable/Disable backup selection from candidate-list only
			flood_reduction boolean							Choices: no yes	Enable/Disable flood reduction
			hello_interval integer								Specify Time between HELLO packets
			instance_id integer								Specify instance ID
			mpls_ldp_sync boolean							Choices: no yes	Enable/Disable MPLS LDP Sync
			mtu_ignore boolean							Choices: no yes	Enable/Disable ignoring of MTU in DBD packets
			network string							Choices: broadcast non-broadcast point-to-multipoint point-to-point	Specify Network type
			nssa dictionary								NSSA settings for the area
				default_information_originate dictionary							Originate default Type 7 LSA
					metric integer						ospfv3 default metric
					metric_type integer						Metric type for default routes
					set boolean					Choices: no yes	Set nssa to default information originate
				no_redistribution boolean						Choices: no yes	Do not send redistributed LSAs into NSSA area
				no_summary boolean						Choices: no yes	Do not send summary LSAs into NSSA area
				set boolean						Choices: no yes	Configure area as NSSA
				translate dictionary							Translate LSA
					type7 dictionary						Translate from Type 7 to Type 5
						always boolean / required				Choices: no yes	Always translate LSAs
			packet_size integer								Specify limit size of OSPFv3 packets
			passive boolean							Choices: no yes	Enable/Disable routing updates on an interface
			prefix_suppression boolean							Choices: no yes	Hide all transit addresses on this interface
			priority integer								Specify Router priority
			ranges list / elements=dictionary								Summarize routes matching address/mask (border routers only)
				address string / required							IP in Prefix format (X:X::X/length)
				advertise boolean						Choices: no yes	Advertise this range (default)
				cost integer							Specify user specified metric for this range
				not_advertise boolean						Choices: no yes	DoNotAdvertise this range
			retransmit_interval integer								Specify Delay between LSA retransmissions
			stub dictionary								Settings for configuring the area as a stub
				no_summary boolean						Choices: no yes	Do not send summary LSA into stub area
				set boolean						Choices: no yes	Configure the area as a stub
			transmit_delay integer								Specify estimated time needed to send link-state update packet
			virtual_link list / elements=dictionary								Define a virtual link
				authentication dictionary							Enable authentication
					disable boolean					Choices: no ← yes	Do not authenticate OSPFv3 packets
					ipsec dictionary						Specify IPSec AH authentication attributes
						algorithim_type string				Choices: md5 sha1	Specify the type of algorithim
						clear_key string					Specify key in cleartext form
						key string					Specify key
						password_key string					Specify key in encrypted form
						spi integer					Specify the Security Parameter Index value
				dead_interval integer							Interval after which a neighbor is declared dead
				encryption dictionary							Encrypt and authenticate OSPFv3 packets
					disable boolean					Choices: no ← yes	Do not encrypt OSPFv3 packets
					ipsec dictionary						Specify IPSec ESP encryption and authentication
						esp dictionary					Specify encryption parameters
							aes dictionary				This specify the aes algorithim
								algorithim_type string		Choices: 192 256	Specify the bit encryption for aes algorithim
								clear_key string			Specify AES key in cleartext form
								key string			Cleartext AES key
								password_key string			Specify AES key in encrypted form
							des dictionary				This specify the des algorithim
								clear_key string			Specify AES key in cleartext form
								key string			Cleartext AES key
								password_key string			Specify AES key in encrypted form
							null_encryption dictionary				Specify null encryption attributes
								authentication dictionary			Specify authentication parameters
									algorithim_type string	Choices: md5 sha1	Specify the type of algorithim
									clear_key string		Specify key in cleartext form
									key string		Specify key
									password_key string		Specify key in encrypted form
							triple_des dictionary				This specify the triple DES algorithim
								clear_key string			Specify 3DES key in cleartext form
								key string			Cleartext 3DES key
								password_key string			Specify 3DES key in encrypted form
						spi integer					Specify the Security Parameter Index value
				hello_interval integer							Time between HELLO packets
				id string / required							Router-ID of virtual link neighbor (A.B.C.D)
				retransmit_interval integer							Delay between LSA retransmissions
				transmit_delay integer							Link state transmit delay
		authentication dictionary									Enable authentication
			disable boolean							Choices: no ← yes	Do not authenticate OSPFv3 packets
			ipsec dictionary								Specify IPSec AH authentication attributes
				algorithim_type string						Choices: md5 sha1	Specify the type of algorithim
				clear_key string							Specify key in cleartext form
				key string							Specify key
				password_key string							Specify key in encrypted form
				spi integer							Specify the Security Parameter Index value
		auto_cost dictionary									Calculate ospfv3 interface cost according to bandwidth
			disable boolean							Choices: no yes	Assign ospfv3 cost based on interface type
			reference_bandwidth integer								Specify reference bandwidth in megabits per sec
		bfd dictionary									Configure BFD parameters
			fast_detect dictionary								Configure fast detection
				set boolean						Choices: no yes	Enable fast detection only
				strict_mode boolean						Choices: no yes	Hold down neighbor session until BFD session is up
			minimum_interval integer								Hello interval in milli-seconds
			multiplier integer								Detect multiplier
		capability dictionary									Enable specific OSPFv3 feature
			type7 dictionary								Specify type7 nssa capability
				prefer boolean						Choices: no yes	Prefer type7 externals over type5
				translate boolean						Choices: no yes	Translate type7 to type5
		cost integer									Specify Interface cost
		database_filter dictionary									Filter LSAs during synchronization and flooding
			all_outgoing_lsa boolean							Choices: no yes	Filter all outgoing LSA
		dead_interval integer									Interval after which a neighbor is declared dead
		default_information_originate dictionary									Control distribution of default information
			always boolean							Choices: no yes	Always advertise default route
			metric integer								ospfv3 default metric
			metric_type integer								ospfv3 metric type for default routes
			route_policy string								Apply route-policy to default-information origination
			set boolean							Choices: no yes	Enable distribution of default route
			tag integer								Set tag for default route
		default_metric integer									Set metric of redistributed routes
		demand_circuit boolean								Choices: no yes	Enable/Disable ospfv3 demand circuit
		distance dictionary									Define an administrative distance
			admin_distance integer								Administrative distance
			ospfv3_distance dictionary								ospfv3 administrative distance
				external integer							Distance for external routes
				inter_area integer							Distance for inter-area routes
				intra_area integer							Distance for intra-area routes
		distribute_list dictionary									Filter prefixes to/from RIB
			prefix_list list / elements=string								Filter prefixes based on an IPv6 prefix-list
				in boolean						Choices: no yes	Filter prefixes installed to RIB
				name string							Specify Prefix-list name
				out boolean						Choices: no yes	Filter prefixes redistributed from RIB
		encryption dictionary									Encrypt and authenticate OSPFv3 packets
			disable boolean							Choices: no ← yes	Do not encrypt OSPFv3 packets
			ipsec dictionary								Specify IPSec ESP encryption and authentication
				esp dictionary							Specify encryption parameters
					aes dictionary						This specify the aes algorithim
						algorithim_type string				Choices: 192 256	Specify the bit encryption for aes algorithim
						clear_key string					Specify AES key in cleartext form
						key string					Cleartext AES key
						password_key string					Specify AES key in encrypted form
					des dictionary						This specify the des algorithim
						clear_key string					Specify AES key in cleartext form
						key string					Cleartext AES key
						password_key string					Specify AES key in encrypted form
					null_encryption dictionary						Specify null encryption attributes
						authentication dictionary					Specify authentication parameters
							algorithim_type string			Choices: md5 sha1	Specify the type of algorithim
							clear_key string				Specify key in cleartext form
							key string				Specify key
							password_key string				Specify key in encrypted form
					triple_des dictionary						This specify the triple DES algorithim
						clear_key string					Specify 3DES key in cleartext form
						key string					Cleartext 3DES key
						password_key string					Specify 3DES key in encrypted form
				spi integer							Specify the Security Parameter Index value
		fast_reroute dictionary									Specify IP Fast Reroute
			disabled boolean							Choices: no yes	Disable IP fast reroute
			per_link dictionary								Specify per-prefix computation
				information_type string						Choices: exclude lfa_candidate	Specify per-link LFA exclusion or FRR LFA candidate information
				interface dictionary							Specify Per-link LFA exclusion information
					bundle_ether list / elements=integer						Specify Aggregated Ethernet interface(s)
					bvi list / elements=integer						Specify Bridge-Group Virtual Interface
					fast_ethernet list / elements=string						Specify FastEthernet/IEEE 802.3 interface(s)
					fiftygige list / elements=string						Specify FiftyGigE/IEEE 802.3 interface(s)
					fortygige list / elements=string						Specify FortyGigE/IEEE 802.3 interface(s)
					fourhundredgige list / elements=string						Specify FourHundredGigE/IEEE 802.3 interface(s)
					gigabitethernet list / elements=string						Specify GigabitEthernet/IEEE 802.3 interface(s)
					hundredgige list / elements=string						Specify HundredGigE/IEEE 802.3 interface(s)
					mgmteth list / elements=string						Specify MgmtEth/IEEE 802.3 interface(s)
					multilink list / elements=string						Specify Multilink network interface(s)
					nve list / elements=integer						Specify Network Virtualization Endpoint Interface(s)
					pos_int list / elements=integer						Specify Aggregated pos interface(s)
					pw_ether list / elements=integer						Specify PWHE Ethernet Interface
					pw_iw list / elements=integer						Specify PWHE VC11 IP Interworking Interface
					serial list / elements=string						Specify Serial network interface(s)
					srp list / elements=string						Specify SRP interface(s)
					tengige list / elements=string						Specify TenGigabitEthernet/IEEE 802.3 interface(s)
					tunnel_ip list / elements=integer						Specify GRE/IPinIP Tunnel Interface(s)
					tunnel_ipsec list / elements=integer						Specify IPSec Tunnel interface(s)
					tunnel_mpls integer						MPLS Transport Protocol Tunnel interface
					tunnel_mte list / elements=integer						Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
					twentyfivegige list / elements=string						Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
					twohundredgige list / elements=string						Specify TwoHundredGigE/IEEE 802.3 interface(s)
				use_candidate_only boolean						Choices: no yes	Enable/Disable backup selection from candidate-list only
			per_prefix dictionary								Specify per-prefix computation
				information_type string						Choices: exclude lfa_candidate	Specify per_prefix LFA exclusion or FRR LFA candidate information
				interface dictionary							Specify Per-link LFA exclusion information
					bundle_ether list / elements=integer						Specify Aggregated Ethernet interface(s)
					bvi list / elements=integer						Specify Bridge-Group Virtual Interface
					fast_ethernet list / elements=string						Specify FastEthernet/IEEE 802.3 interface(s)
					fiftygige list / elements=string						Specify FiftyGigE/IEEE 802.3 interface(s)
					fortygige list / elements=string						Specify FortyGigE/IEEE 802.3 interface(s)
					fourhundredgige list / elements=string						Specify FourHundredGigE/IEEE 802.3 interface(s)
					gigabitethernet list / elements=string						Specify GigabitEthernet/IEEE 802.3 interface(s)
					hundredgige list / elements=string						Specify HundredGigE/IEEE 802.3 interface(s)
					mgmteth list / elements=string						Specify MgmtEth/IEEE 802.3 interface(s)
					multilink list / elements=string						Specify Multilink network interface(s)
					nve list / elements=integer						Specify Network Virtualization Endpoint Interface(s)
					post_int list / elements=integer						Specify Aggregated pos interface(s)
					pw_ether list / elements=integer						Specify PWHE Ethernet Interface
					pw_iw list / elements=integer						Specify PWHE VC11 IP Interworking Interface
					serial list / elements=string						Specify Serial network interface(s)
					srp list / elements=string						Specify SRP interface(s)
					tengige list / elements=string						Specify TenGigabitEthernet/IEEE 802.3 interface(s)
					tunnel_ip list / elements=integer						Specify GRE/IPinIP Tunnel Interface(s)
					tunnel_ipsec list / elements=integer						Specify IPSec Tunnel interface(s)
					tunnel_mpls integer						MPLS Transport Protocol Tunnel interface
					tunnel_mte list / elements=integer						Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
					twentyfivegige list / elements=string						Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
					twohundredgige list / elements=string						Specify TwoHundredGigE/IEEE 802.3 interface(s)
				use_candidate_only boolean						Choices: no yes	Enable/Disable backup selection from candidate-list only
		flood_reduction boolean								Choices: no yes	Enable/Disable flood reduction
		graceful_restart dictionary									Enable Graceful-Restart
			helper_disable boolean							Choices: no yes	Disable router's helper support level
			max_interval integer								Maximum route lifetime following restart
			min_interval integer								Minimum interval between Graceful Restarts
			set boolean							Choices: no yes	Set graceful restart
		hello_interval integer									Specify Time between HELLO packets
		ignore_mospf_type6_lsa boolean								Choices: no yes	Ignore MOSPF Type 6 LSA
		instance_id integer									Specify instance ID
		log_adjacency_changes dictionary									Log adjacency state changes
			detail boolean							Choices: no yes	Log all state changes
			disable boolean							Choices: no yes	Disable log adjacency changes
			set boolean							Choices: no yes	Set log adjacency
		maximum dictionary									Set OSPFv3 limits
			interfaces integer								Specify limit for number of interfaces
			paths integer								Specify limit for number of paths
			redistributed_prefixes integer								Specify limit for number of redistributed prefixes
		mpls_ldp_sync boolean								Choices: no yes	Enable/Disable MPLS LDP Sync
		mtu_ignore boolean								Choices: no yes	Enable/Disable ignoring of MTU in DBD packets
		network string								Choices: broadcast non-broadcast point-to-multipoint point-to-point	Specify Network type
		nsr boolean								Choices: no yes	Enable/Disable NSR for all VRFs in this process
		packet_size integer									Specify limit size of OSPFv3 packets
		passive boolean								Choices: no yes	Enable/Disable routing updates on an interface
		prefix_suppression boolean								Choices: no yes	Hide all transit addresses on this interface
		priority integer									Specify Router priority
		process_id string / required									The OSPFv3 Process ID
		protocol_shutdown boolean								Choices: no yes	Gracefully shutdown the OSPFv3 protocol
		redistribute dictionary									Redistribute information from another routing Protocol
			application list / elements=dictionary								Specify application routes
				id string / required							OnePK Application name
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set application route
				tag integer							Set tag for routes redistributed into OSPFv3
			bgp list / elements=dictionary								Specify bgp routes
				id integer / required							BGP process name
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				preserved_med string							Specify preserve med of BGP routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set bgp route number
				tag integer							Set tag for routes redistributed into OSPFv3
			connected dictionary								Specify connected routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set connected route
				tag integer							Set tag for routes redistributed into OSPFv3
			eigrp list / elements=dictionary								Specify eigrp routes
				id integer / required							EIGRP process name
				match string						Choices: external internal	Redistribution of EIGRP routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set bgp route number
				tag integer							Set tag for routes redistributed into OSPFv3
			isis list / elements=dictionary								Specify IS-IS routes
				id string / required							IS-IS name
				level string						Choices: level-1 level-1-2 level-2	Specify IS-IS level routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set IS-IS route number
				tag integer							Set tag for routes redistributed into OSPFv3
			mobile dictionary								Specify mobile routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set mobile route number
				tag integer							Set tag for routes redistributed into OSPFv3
			ospfv3 list / elements=dictionary								Specify ospfv3 routes
				id string / required							OSPFv3 process name
				match dictionary							Redistribution of OSPFv3 routes
					external integer					Choices: 1 2	Redistribute OSPFv3 external routes
					internal boolean					Choices: no yes	Redistribute OSPFv3 internal routes
					nssa_external integer					Choices: 1 2	Redistribute NSSA OSPFv3 external routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set ospfv3 route number
				tag integer							Set tag for routes redistributed into OSPFv3
			static dictionary								Specify static routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set static route
				tag integer							Set tag for routes redistributed into OSPFv3
			subscriber dictionary								Specify subscriber routes
				metric integer							Specify metric for redistributed routes
				metric_type integer							Specify OSPFv3 exterior metric type for redistributed routes
				route_policy string							Apply route policy to redistribution
				set boolean						Choices: no yes	Set static route
				tag integer							Set tag for routes redistributed into OSPFv3
		retransmit_interval integer									Delay between LSA retransmissions
		router_id string									ospfv3 router-id in IPv4 address format (A.B.C.D)
		spf_prefix_priority dictionary									Specify SPF configuration
			disable boolean							Choices: no yes	Disable SPF prefix priority
			route_policy list / elements=dictionary								Specify the route-policy to prioritize route install
				name string							Specify name of the policy
				value string							Specify parameter values for the policy ()
		stub_router dictionary									Enter stub router configuration submode
			router_lsa dictionary								Modify self originated router LSAs
				advertise_with string						Choices: max-metric r-bit v6-bit	Advertise LSAs with specified type
				always boolean						Choices: no yes	Force ospfv3 stub router mode unconditionally
				external_lsa dictionary							Override External LSA metric in stub router mode
					metric integer						Metric to use while in stub router mode
					set boolean					Choices: no yes	Set external lsa
				include_stub boolean						Choices: no yes	Set maximum metric for stub links in stub router mode
				on_proc_migration integer							Enter stub router mode on ospfv3 process migration
				on_proc_restart integer							Enter stub router mode on ospfv3 process restart
				on_startup dictionary							Enter stub router mode on startup
					time integer						Time in seconds to stay in stub router mode
					wait_for_bgp boolean					Choices: no yes	Exit stub router mode when BGP converges
				on_switchover integer							Enter stub router mode on RP switchover
				summary_lsa dictionary							Override Summary LSA metric in stub router mode
					metric integer						Metric to use while in stub router mode
					set boolean					Choices: no yes	Enable summary LSA
		summary_prefix list / elements=dictionary									Configure IP address summaries
			not_advertise boolean							Choices: no yes	Suppress routes that match the specified prefix/mask pair
			prefix string / required								IP summary address/mask (A.B.C.D/prefix)
			tag integer								Set tag
		timers dictionary									Adjust routing timers
			lsa_arrival integer								Specify LSA arrival timers
			pacing dictionary								Specify pacing timers
				flood integer							Flood pacing timer
				lsa_group integer							LSA group pacing timer
				retransmission integer							LSA group pacing timer
			throttle dictionary								Adjust throttle timers
				lsa dictionary							Specify LSA throttle timers
					all_lsa_initial integer						Delay to generate first occurrence of LSA in milliseconds
					all_lsa_minimum integer						Minimum delay between originating the same LSA in milliseconds
				spf dictionary							Specify SPF throttle timers
					spf_initial integer						Delay to generate first occurrence of SPF in ms
					spf_minimum integer						Minimum delay between originating the same SPF in ms
		trace dictionary									Specify OSPF tracing options
			size string								Delete existing buffer and create one with N entries
			value integer								Specify trace entry
		transmit_delay integer									Estimated time needed to send link-state update packet
running_config string											This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config router ospfv3. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string										Choices: merged ← replaced overridden deleted gathered rendered parsed	The state the configuration should be left in

Notes

Note

This module works with connection network_cli. See the IOS-XR Platform Options

Examples

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# Thu Jun 11 15:54:44.569 UTC
# % No such configuration item(s)
#

- name: Merge provided OSPFv3 configuration with the existing configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#    ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# ------------
# After state
# ------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !



# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Replace OSPFv3 routes configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
            - area_id: 20
              cost: 2
              default_cost: 2
        - process_id: 26
          authentication:
            disable: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 27",
#         "area 20 default-cost 2",
#         "area 20 cost 2"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#do show running-config router ospfv3
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !


- name: Override existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
            - area_id: 20
              cost: 2
              default_cost: 2
              authentication:
                disable: true
        - process_id: 26
          areas:
            - area_id: 10
              hello_interval: 2
              authentication:
                disable: true
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
#  "commands": [
#         "router ospfv3 10",
#         "no area 11 default-cost 5",
#         "no area 11 cost 11",
#         "no area 22 default-cost 6",
#         "router ospfv3 30",
#         "no cost 2",
#         "no priority 1",
#         "no default-metric 10",
#         "no router-id 2.2.2.2",
#         "no demand-circuit",
#         "no packet-size 577",
#         "no transmit-delay 2",
#         "no dead-interval 2",
#         "no hello-interval 1",
#         "no retransmit-interval 2",
#         "no mtu-ignore",
#         "no area 11 default-cost 5",
#         "no area 22 default-cost 6",
#         "router ospfv3 26",
#         "area 10 hello-interval 4"
#     ]
#
#  "after": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !



# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/RP0/CPU0:anton#show running-config router ospfv3
# router ospfv3 10
#  area 11
#  !
#  area 22
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#   hello-interval 4
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#   cost 2
#   default-cost 2
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  area 11
#  !
#  area 22
#  !
# !

- name: Deleted existing OSPFv3 configurations from the device
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
      - process_id: '10'
      - process_id: '26'
      - process_id: '27'
      - process_id: '30'
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#         "processes": [
#             {
#                 "process_id": "10"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 4
#                     }
#                 ],
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     },
#                     {
#                         "area_id": "20",
#                         "cost": 2,
#                         "default_cost": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "process_id": "30"
#             }
#         ]
#     },
#
#  "commands": [
#         "router ospfv3 26",
#         "no authentication disable",
#         "no area 10 hello-interval 4",
#         "router ospfv3 27",
#         "no area 10 hello-interval 2",
#         "no area 20 default-cost 2",
#         "no area 20 cost 2"
#     ]
#
#  "after": {
#        "processes": [
#            {
#                "process_id": "10"
#            },
#            {
#                "process_id": "26"
#            },
#            {
#                "process_id": "27"
#            },
#            {
#                "process_id": "30"
#            }
#        ]
#    }
#
#
# -----------
# After state
# -----------
#
# RP/0/RP0/CPU0:anton(config)#show running-config router ospfv3
# router ospfv3 10
# !
# router ospfv3 26
# !
# router ospfv3 27
# !
# router ospfv3 30
# !


# Using parsed
# parsed.cfg
# ------------
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
# !
# router ospfv3 30
#  router-id 2.2.2.2
#  cost 2
#  packet-size 577
#  priority 1
#  mtu-ignore
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospfv3:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#
# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospfv3:
    config:
      processes:
        - process_id: 27
          areas:
            - area_id: 10
              hello_interval: 2
        - process_id: 26
          authentication:
            disable: true
        - process_id: 10
          areas:
            - area_id: 11
              default_cost: 5
              cost: 11
            - area_id: 22
              default_cost: 6
        - process_id: 30
          areas:
            - area_id: 11
              default_cost: 5
            - area_id: 22
              default_cost: 6
          cost: 2
          default_metric: 10
          transmit_delay: 2
          hello_interval: 1
          dead_interval: 2
          retransmit_interval: 2
          packet_size: 577
          priority: 1
          router_id: '2.2.2.2'
          demand_circuit: true
          mtu_ignore: true
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#         "router ospfv3 27",
#         "area 10 hello-interval 2",
#         "router ospfv3 26",
#         "authentication disable",
#         "router ospfv3 10",
#         "area 11 default-cost 5",
#         "area 11 cost 11",
#         "area 22 default-cost 6",
#         "router ospfv3 30",
#         "cost 2",
#         "priority 1",
#         "default-metric 10",
#         "router-id 2.2.2.2",
#         "demand-circuit",
#         "packet-size 577",
#         "transmit-delay 2",
#         "dead-interval 2",
#         "hello-interval 1",
#         "retransmit-interval 2",
#         "mtu-ignore",
#         "area 11 default-cost 5",
#         "area 22 default-cost 6"
#     ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# router ospfv3 10
#  area 11
#   cost 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !
# router ospfv3 26
#  authentication disable
#  area 10
#  !
# !
# router ospfv3 27
#  area 10
#   hello-interval 2
#  !
#  area 20
#  !
#  area 30
#  !
# !
# router ospfv3 30
#  cost 2
#  priority 1
#  mtu-ignore
#  packet-size 577
#  dead-interval 2
#  retransmit-interval 2
#  demand-circuit
#  hello-interval 1
#  transmit-delay 2
#  router-id 2.2.2.2
#  default-metric 10
#  area 11
#   default-cost 5
#  !
#  area 22
#   default-cost 6
#  !
# !

- name: Gather ospfv3 routes configuration
  cisco.iosxr.iosxr_ospfv3:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "cost": 11,
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "process_id": "10"
#             },
#             {
#                 "authentication": {
#                     "disable": true
#                 },
#                 "process_id": "26"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "hello_interval": 2
#                     }
#                 ],
#                 "process_id": "27"
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "11",
#                         "default_cost": 5
#                     },
#                     {
#                         "area_id": "22",
#                         "default_cost": 6
#                     }
#                 ],
#                 "cost": 2,
#                 "dead_interval": 2,
#                 "default_metric": 10,
#                 "demand_circuit": true,
#                 "hello_interval": 1,
#                 "mtu_ignore": true,
#                 "packet_size": 577,
#                 "priority": 1,
#                 "process_id": "30",
#                 "retransmit_interval": 2,
#                 "router_id": "2.2.2.2",
#                 "transmit_delay": 2
#             }
#         ]
#     }
#

Authors

Rohit Thakur (@rohitthakur2590)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/iosxr/iosxr_ospfv3_module.html

Docs

Docs4dev

Title here

cisco.iosxr.iosxr_ospfv3 – ospfv3 resource module

Synopsis

Parameters

Notes

Examples

Authors