cisco.meraki.meraki_snmp – Manage organizations in the Meraki cloud

Note

This plugin is part of the cisco.meraki collection (version 2.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki.

To use it in a playbook, specify: cisco.meraki.meraki_snmp.

Synopsis

Allows for management of SNMP settings for Meraki.

Parameters

Parameter		Choices/Defaults	Comments
access string		Choices: community none users	Type of SNMP access.
auth_key string / required			Authentication key provided by the dashboard. Required if environmental variable `MERAKI_KEY` is not set.
community_string string			SNMP community string. Only relevant if `access` is set to `community`.
host string		Default: "api.meraki.com"	Hostname for Meraki dashboard. Can be used to access regional Meraki environments, such as China.
internal_error_retry_time integer		Default: 60	Number of seconds to retry if server returns an internal server error.
net_id string			ID of network.
net_name string			Name of network.
org_id string			ID of organization.
org_name string			Name of organization. aliases: organization
output_format string		Choices: snakecase ← camelcase	Instructs module whether response keys should be snake case (ex. `net_id`) or camel case (ex. `netId`).
output_level string		Choices: debug normal ←	Set amount of debug output during module execution.
peer_ips list / elements=string			List of IP addresses which can perform SNMP queries.
rate_limit_retry_time integer		Default: 165	Number of seconds to retry if rate limiter is triggered.
state string		Choices: query present ←	Specifies whether SNMP information should be queried or modified.
timeout integer		Default: 30	Time to timeout for HTTP requests.
use_https boolean		Choices: no yes ←	If `no`, it will use HTTP. Otherwise it will use HTTPS. Only useful for internal Meraki developers.
use_proxy boolean		Choices: no ← yes	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts.
users list / elements=dictionary			Information about users with access to SNMP. Only relevant if `access` is set to `users`.
	passphrase string		Passphrase for user SNMP access.
	username string		Username of user with access.
v2c_enabled boolean		Choices: no yes	Specifies whether SNMPv2c is enabled.
v3_auth_mode string		Choices: MD5 SHA	Sets authentication mode for SNMPv3.
v3_auth_pass string			Authentication password for SNMPv3. Must be at least 8 characters long.
v3_enabled boolean		Choices: no yes	Specifies whether SNMPv3 is enabled.
v3_priv_mode string		Choices: DES AES128	Specifies privacy mode for SNMPv3.
v3_priv_pass string			Privacy password for SNMPv3. Must be at least 8 characters long.
validate_certs boolean		Choices: no yes ←	Whether to validate HTTP certificates.

Notes

Note

More information about the Meraki API can be found at https://dashboard.meraki.com/api_docs.
Some of the options are likely only used for developers within Meraki.
As of Ansible 2.9, Meraki modules output keys as snake case. To use camel case, set the ANSIBLE_MERAKI_FORMAT environment variable to camelcase.
Ansible’s Meraki modules will stop supporting camel case output in Ansible 2.13. Please update your playbooks.
Check Mode downloads the current configuration from the dashboard, then compares changes against this download. Check Mode will report changed if there are differences in the configurations, but does not submit changes to the API for validation of change.

Examples

- name: Query SNMP values
  meraki_snmp:
    auth_key: abc12345
    org_name: YourOrg
    state: query
  delegate_to: localhost

- name: Enable SNMPv2
  meraki_snmp:
    auth_key: abc12345
    org_name: YourOrg
    state: present
    v2c_enabled: yes
  delegate_to: localhost

- name: Disable SNMPv2
  meraki_snmp:
    auth_key: abc12345
    org_name: YourOrg
    state: present
    v2c_enabled: no
  delegate_to: localhost

- name: Enable SNMPv3
  meraki_snmp:
    auth_key: abc12345
    org_name: YourOrg
    state: present
    v3_enabled: true
    v3_auth_mode: SHA
    v3_auth_pass: ansiblepass
    v3_priv_mode: AES128
    v3_priv_pass: ansiblepass
    peer_ips: 192.0.1.1;192.0.1.2
  delegate_to: localhost

- name: Set network access type to community string
  meraki_snmp:
    auth_key: abc1235
    org_name: YourOrg
    net_name: YourNet
    state: present
    access: community
    community_string: abc123
  delegate_to: localhost

- name: Set network access type to username
  meraki_snmp:
    auth_key: abc1235
    org_name: YourOrg
    net_name: YourNet
    state: present
    access: users
    users:
      - username: ansibleuser
        passphrase: ansiblepass
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key			Returned	Description
data complex			always	Information about SNMP settings.
	access string		success, when network specified	Type of SNMP access.
	community_string string		success, when network specified	SNMP community string. Only relevant if `access` is set to `community`.
	hostname string		success and no network specified.	Hostname of SNMP server. Sample: n1.meraki.com
	peer_ips string		success and no network specified.	Semi-colon delimited list of IPs which can poll SNMP information. Sample: 192.0.1.1
	port string		success and no network specified.	Port number of SNMP. Sample: 16100
	users complex		success	Information about users with access to SNMP. Only relevant if `access` is set to `users`.
		passphrase string	success, when network specified	Passphrase for user SNMP access.
		username string	success, when network specified	Username of user with access.
	v2_community_string string		When SNMPv2c is enabled and no network specified.	Automatically generated community string for SNMPv2c. Sample: o/8zd-JaSb
	v2c_enabled boolean		success and no network specified.	Shows enabled state of SNMPv2c Sample: True
	v3_auth_mode string		success and no network specified.	The SNMP version 3 authentication mode either MD5 or SHA. Sample: SHA
	v3_enabled boolean		success and no network specified.	Shows enabled state of SNMPv3 Sample: True
	v3_priv_mode string		success and no network specified.	The SNMP version 3 privacy mode DES or AES128. Sample: AES128
	v3_user string		When SNMPv3c is enabled and no network specified.	Automatically generated username for SNMPv3. Sample: o/8zd-JaSb

Authors

Kevin Breit (@kbreit)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/meraki/meraki_snmp_module.html

Docs

Docs4dev

Title here