cisco.mso.mso_schema_site_anp_epg_domain – Manage site-local EPG domains in schema template

Note

This plugin is part of the cisco.mso collection (version 1.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.mso.

To use it in a playbook, specify: cisco.mso.mso_schema_site_anp_epg_domain.

Synopsis

Manage site-local EPG domains in schema template on Cisco ACI Multi-Site.

Requirements

The below requirements are needed on the host that executes this module.

Multi Site Orchestrator v2.1 or newer

Parameters

Parameter	Choices/Defaults	Comments
allow_micro_segmentation boolean	Choices: no yes	Specifies microsegmentation is enabled or not. This attribute can only be used with vmmDomain domain association.
anp string / required		The name of the ANP.
deployment_immediacy string	Choices: immediate lazy	The deployment immediacy of the domain. `immediate` means Deploy immediate. `lazy` means deploy on demand.
domain_association_type string	Choices: vmmDomain l3ExtDomain l2ExtDomain physicalDomain fibreChannelDomain	The type of domain to associate.
domain_profile string		The domain profile name.
enhanced_lagpolicy_dn string		Distinguished name of EPG lagpolicy. This attribute can only be used with vmmDomain domain association.
enhanced_lagpolicy_name string		EPG enhanced lagpolicy name. This attribute can only be used with vmmDomain domain association.
epg string / required		The name of the EPG.
host string		IP Address or hostname of the ACI Multi Site Orchestrator host. If the value is not specified in the task, the value of environment variable `MSO_HOST` will be used instead. aliases: hostname
login_domain string		The login domain name to use for authentication. The default value is Local. If the value is not specified in the task, the value of environment variable `MSO_LOGIN_DOMAIN` will be used instead.
micro_seg_vlan integer		Virtual LAN for microsegmentation. This attribute can only be used with vmmDomain domain association.
micro_seg_vlan_type string		Virtual LAN type for microsegmentation. This attribute can only be used with vmmDomain domain association. vlan is currently the only accepted value.
output_level string	Choices: debug info normal ←	Influence the output of this MSO module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information If the value is not specified in the task, the value of environment variable `MSO_OUTPUT_LEVEL` will be used instead.
password string		The password to use for authentication. If the value is not specified in the task, the value of environment variables `MSO_PASSWORD` or `ANSIBLE_NET_PASSWORD` will be used instead.
port integer		Port number to be used for the REST connection. The default value depends on parameter `use_ssl`. If the value is not specified in the task, the value of environment variable `MSO_PORT` will be used instead.
port_encap_vlan integer		Virtual LAN type for port encap. This attribute can only be used with vmmDomain domain association.
port_encap_vlan_type string		Virtual LAN type for port encap. This attribute can only be used with vmmDomain domain association. vlan is currently the only accepted value.
resolution_immediacy string	Choices: immediate lazy pre-provision	Determines when the policies should be resolved and available. Defaults to `lazy` when unset during creation.
schema string / required		The name of the schema.
site string / required		The name of the site.
state string	Choices: absent present ← query	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects.
switch_type string		Which switch type to use with this domain association. This attribute can only be used with vmmDomain domain association.
switching_mode string		Which switching mode to use with this domain association. This attribute can only be used with vmmDomain domain association.
template string / required		The name of the template.
timeout integer	Default: 30	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable `MSO_TIMEOUT` will be used instead.
use_proxy boolean	Choices: no yes ←	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable `MSO_USE_PROXY` will be used instead.
use_ssl boolean	Choices: no yes ←	If `no`, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable `MSO_USE_SSL` will be used instead.
username string	Default: "admin"	The username to use for authentication. If the value is not specified in the task, the value of environment variables `MSO_USERNAME` or `ANSIBLE_NET_USERNAME` will be used instead.
validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable `MSO_VALIDATE_CERTS` will be used instead.
vlan_encap_mode string	Choices: static dynamic	Which VLAN enacap mode to use. This attribute can only be used with vmmDomain domain association.

Notes

Note

The ACI MultiSite PATCH API has a deficiency requiring some objects to be referenced by index. This can cause silent corruption on concurrent access when changing/removing on object as the wrong object may be referenced. This module is affected by this deficiency.
Please read the mso_guide for more detailed information on how to manage your MSO infrastructure using Ansible.
This module was written to support Multi Site Orchestrator v2.1 or newer. Some or all functionality may not work on earlier versions.

Examples

- name: Add a new domain to a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    deployment_immediacy: lazy
    resolution_immediacy: pre-provision
    state: present
  delegate_to: localhost

- name: Remove a domain from a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    deployment_immediacy: lazy
    resolution_immediacy: pre-provision
    state: absent
  delegate_to: localhost

- name: Query a domain associated with a specific site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    domain_association_type: vmmDomain
    domain_profile: 'VMware-VMM'
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all domains associated with a site EPG
  cisco.mso.mso_schema_site_anp_epg_domain:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema1
    site: Site1
    template: Template1
    anp: ANP1
    epg: EPG1
    state: query
  delegate_to: localhost
  register: query_result

Authors

Nirav Katarmal (@nkatarmal-crest)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/mso/mso_schema_site_anp_epg_domain_module.html

Docs

Docs4dev

Title here