Docs4dev
Docs
ansible / latest / collections / cisco / nxos / nxos_interface_ospf_module.html

cisco.nxos.nxos_interface_ospf – (deprecated, removed after 2022-10-26) Manages configuration of an OSPF interface instance.

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_interface_ospf.

New in version 1.0.0: of cisco.nxos

DEPRECATED

Removed in

major release after 2022-10-26

Why

Updated modules released with more functionality

Alternative

nxos_ospf_interfaces

Synopsis

  • Manages configuration of an OSPF interface instance.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
area
string / required
Ospf area associated with this cisco_interface_ospf instance. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer.
bfd
string
    Choices:
  • enable
  • disable
  • default
Enables bfd at interface level. This overrides the bfd variable set at the ospf router level.
Valid values are 'enable', 'disable' or 'default'.
Dependency: ''feature bfd''
cost
string
The cost associated with this cisco_interface_ospf instance.
dead_interval
string
Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer or the keyword 'default'.
hello_interval
string
Time between sending successive hello packets. Valid values are an integer or the keyword 'default'.
interface
string / required
Name of this cisco_interface resource. Valid value is a string.
message_digest
boolean
    Choices:
  • no
  • yes
Enables or disables the usage of message digest authentication.
message_digest_algorithm_type
string
    Choices:
  • md5
  • default
Algorithm used for authentication among neighboring routers within an area. Valid values are 'md5' and 'default'.
message_digest_encryption_type
string
    Choices:
  • cisco_type_7
  • 3des
  • default
Specifies the scheme used for encrypting message_digest_password. Valid values are '3des' or 'cisco_type_7' encryption or 'default'.
message_digest_key_id
string
Md5 authentication key-id associated with the ospf instance. If this is present, message_digest_encryption_type, message_digest_algorithm_type and message_digest_password are mandatory. Valid value is an integer and 'default'.
message_digest_password
string
Specifies the message_digest password. Valid value is a string.
network
string
    Choices:
  • point-to-point
  • broadcast
Specifies interface ospf network type. Valid values are 'point-to-point' or 'broadcast'.
ospf
string / required
Name of the ospf instance.
passive_interface
boolean
    Choices:
  • no
  • yes
Enable or disable passive-interface state on this interface. true - (enable) Prevent OSPF from establishing an adjacency or sending routing updates on this interface. false - (disable) Override global 'passive-interface default' for this interface.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli ←
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no ←
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
state
string
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • Unsupported for Cisco MDS
  • Default, where supported, restores params default value.
  • To remove an existing authentication configuration you should use message_digest_key_id=default plus all other options matching their existing values.
  • Loopback interfaces only support ospf network type ‘point-to-point’.
  • state=absent removes the whole OSPF interface configuration.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- cisco.nxos.nxos_interface_ospf:
    interface: ethernet1/32
    ospf: 1
    area: 1
    bfd: disable
    cost: default

- cisco.nxos.nxos_interface_ospf:
    interface: loopback0
    ospf: prod
    area: 0.0.0.0
    bfd: enable
    network: point-to-point
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
commands sent to the device

Sample:
['interface Ethernet1/32', 'ip router ospf 1 area 0.0.0.1', 'ip ospf bfd disable']


Status

  • This module will be removed in a major release after 2022-10-26. [deprecated]
  • For more information see DEPRECATED.

Authors

  • Gabriele Gerbino (@GGabriele)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_interface_ospf_module.html