cisco.nxos.nxos_logging_global – Logging resource module.

Note

This plugin is part of the cisco.nxos collection (version 2.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_logging_global.

New in version 2.5.0: of cisco.nxos

Synopsis

This module manages logging configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Parameters

Parameter					Choices/Defaults	Comments
config dictionary						A dictionary of logging configuration.
	console dictionary					Set console logging parameters.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		state string			Choices: enabled disabled	Enable or disable monitor logging.
	event dictionary					Interface events.
		link_status dictionary				UPDOWN and CHANGE messages.
			default boolean		Choices: no yes	Default logging configuration used by interfaces not explicitly configured.
			enable boolean		Choices: no yes	To enable logging overriding port severity configuration.
		trunk_status dictionary				TRUNK status messages.
			default boolean		Choices: no yes	Default logging configuration used by interfaces not explicitly configured.
			enable boolean		Choices: no yes	To enable logging overriding port severity configuration.
	facilities list / elements=dictionary					Facility parameter for syslog messages.
		facility string				Facility name.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
	history dictionary					Modifies severity severity or size for history table.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		size integer				Set history table size.
	hosts list / elements=dictionary					Enable forwarding to Remote Syslog Servers.
		facility string				Facility to use when forwarding to server.
		host string				Hostname/IPv4/IPv6 address of the Remote Syslog Server.
		port integer				Destination Port when forwarding to remote server.
		secure dictionary				Enable secure connection to remote server.
			trustpoint dictionary			Trustpoint configuration.
				client_identity string		Client Identity certificate for mutual authentication. Trustpoint to use for client certificate authentication.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		use_vrf string				Display per-VRF information.
	ip dictionary					IP configuration.
		access_list dictionary				Access-List.
			cache dictionary			Set caching settings.
				entries integer		Maximum number of log entries cached in software.
				interval integer		Log-update interval (in sec).
				threshold integer		Log-update threshold (number of hits)
			detailed boolean		Choices: no yes	Detailed ACL information.
			include dictionary			Include additional fields in syslogs.
				sgt boolean	Choices: no yes	Include source group tag info in syslogs.
	logfile dictionary					Set file logging.
		name string				Logfile name.
		persistent_threshold integer				Set persistent logging utilization alert threshold in percentage.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		size integer				Enter the logfile size in bytes.
		state string			Choices: enabled disabled	Enable or disable logfile.
	module dictionary					Set module(linecard) logging.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		state string			Choices: enabled disabled	Enable or disable module logging.
	monitor dictionary					Set terminal line(monitor) logging severity.
		severity string			Choices: emergency alert critical error warning notification informational debugging	Set severity severity for console.
		state string			Choices: enabled disabled	Enable or disable monitor logging.
	origin_id dictionary					Enable origin information for Remote Syslog Server.
		hostname boolean			Choices: no yes	Use hostname as origin-id of logging messages. This option is mutually exclusive with ip and string.
		ip string				Use ip address as origin-id of logging messages. This option is mutually exclusive with hostname and string.
		string string				Use text string as origin-id of logging messages. This option is mutually exclusive with hostname and ip.
	rate_limit string				Choices: enabled disabled	Enable or disable rate limit for log messages.
	rfc_strict boolean				Choices: no yes	Set RFC to which messages should compliant. Syslogs will be compliant to RFC 5424.
	source_interface string					Enable Source-Interface for Remote Syslog Server.
	timestamp string				Choices: microseconds milliseconds seconds	Set logging timestamp granularity.
running_config string						This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| include logging. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string					Choices: merged ← replaced overridden deleted parsed gathered rendered	The state the configuration should be left in. The states replaced and overridden have identical behaviour for this module. Refer to examples for more details.

Notes

Note

Tested against NX-OS 9.3.6.
Limited Support for Cisco MDS
This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# show running-config | include logging
# nxos-9k-rdo#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_logging_global:
    config:
      console:
        severity: error
      monitor:
        severity: warning
      ip:
        access_list:
          cache:
            entries: 16384
            interval: 200
            threshold: 5000
      facilities:
        - facility: auth
          severity: critical
        - facility: ospfv3
          severity: alert
        - facility: ftp
          severity: informational
      hosts:
        - host: 203.0.113.100
          severity: alert
          use_vrf: management
        - host: 203.0.113.101
          severity: error
          facility: local6
          use_vrf: default
      origin_id:
        hostname: True

# Task output
# -------------
#  before: {}
#
#  commands:
#    - "logging console 3"
#    - "logging monitor 4"
#    - "logging ip access-list cache entries 16384"
#    - "logging ip access-list cache interval 200"
#    - "logging ip access-list cache threshold 5000"
#    - "logging severity auth 2"
#    - "logging severity ospfv3 1"
#    - "logging severity ftp 6"
#    - "logging server 203.0.113.100 1 use-vrf management"
#    - "logging server 203.0.113.101 3 facility local6 use-vrf default"
#    - "logging origin-id hostname"
#
# after:
#   console:
#      severity: error
#    facilities:
#      - facility: auth
#        severity: critical
#      - facility: ftp
#        severity: informational
#      - facility: ospfv3
#        severity: alert
#    ip:
#      access_list:
#        cache:
#          entries: 16384
#          interval: 200
#          threshold: 5000
#    monitor:
#      severity: warning
#    origin_id:
#      hostname: true
#    hosts:
#      - severity: alert
#        host: 203.0.113.100
#        use_vrf: management
#      - facility: local6
#        severity: error
#        host: 203.0.113.101
#        use_vrf: default

# After state:
# ------------
# nxos-9k-rdo# show running-config | include logging
# logging console 3
# logging monitor 4
# logging ip access-list cache entries 16384
# logging ip access-list cache interval 200
# logging ip access-list cache threshold 5000
# logging severity auth 2
# logging severity ospfv3 1
# logging severity ftp 6
# logging origin-id hostname
# logging server 203.0.113.100 1 use-vrf management
# logging server 203.0.113.101 3 use-vrf default facility local6

# Using replaced

# Before state:
# ------------
# nxos-9k-rdo# show running-config | include logging
# logging console 3
# logging monitor 4
# logging ip access-list cache entries 16384
# logging ip access-list cache interval 200
# logging ip access-list cache threshold 5000
# logging severity auth 2
# logging severity ospfv3 1
# logging severity ftp 6
# logging origin-id hostname
# logging server 203.0.113.100 1 use-vrf management
# logging server 203.0.113.101 3 use-vrf default facility local6

- name: Replace logging configurations with provided config
  cisco.nxos.nxos_logging_global:
    config:
      monitor:
        severity: warning
      ip:
        access_list:
          cache:
            entries: 4096
      facilities:
        - facility: auth
          severity: critical
        - facility: ospfv3
          severity: alert
        - facility: ftp
          severity: informational
      hosts:
        - host: 203.0.113.101
          severity: error
          facility: local6
          use_vrf: default
        - host: 198.51.100.101
          severity: alert
          port: 6538
          use_vrf: management
      origin_id:
        ip: 192.0.2.100
    state: replaced

# Task output
# -------------
# before:
#   console:
#      severity: error
#    facilities:
#      - facility: auth
#        severity: critical
#      - facility: ftp
#        severity: informational
#      - facility: ospfv3
#        severity: alert
#    ip:
#      access_list:
#        cache:
#          entries: 16384
#          interval: 200
#          threshold: 5000
#    monitor:
#      severity: warning
#    origin_id:
#      hostname: true
#    hosts:
#      - severity: alert
#        host: 203.0.113.100
#        use_vrf: management
#      - facility: local6
#        severity: error
#        host: 203.0.113.101
#        use_vrf: default
#
# commands:
#   - "logging console"
#   - "logging ip access-list cache entries 4096"
#   - "no logging ip access-list cache interval 200"
#   - "no logging ip access-list cache threshold 5000"
#   - "no logging origin-id hostname"
#   - "logging origin-id ip 192.0.2.100"
#   - "logging server 198.51.100.101 1 port 6538 use-vrf management"
#   - "no logging server 203.0.113.100 1 use-vrf management"
#
#  after:
#    facilities:
#      - facility: auth
#        severity: critical
#      - facility: ftp
#        severity: informational
#      - facility: ospfv3
#        severity: alert
#    ip:
#      access_list:
#        cache:
#          entries: 4096
#    monitor:
#      severity: warning
#    origin_id:
#      ip: 192.0.2.100
#    hosts:
#      - severity: alert
#        port: 6538
#        host: 198.51.100.101
#        use_vrf: management
#      - facility: local6
#        severity: error
#        host: 203.0.113.101
#        use_vrf: default
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | include logging
# logging monitor 4
# logging ip access-list cache entries 4096
# logging severity auth 2
# logging severity ospfv3 1
# logging severity ftp 6
# logging origin-id ip 192.0.2.100
# logging server 203.0.113.101 3 use-vrf default facility local6
# logging server 198.51.100.101 1 port 6538 use-vrf management

# Using deleted to delete all logging configurations

# Before state:
# ------------
# nxos-9k-rdo# show running-config | include logging
# logging console 3
# logging monitor 4
# logging ip access-list cache entries 16384
# logging ip access-list cache interval 200
# logging ip access-list cache threshold 5000
# logging severity auth 2
# logging severity ospfv3 1
# logging severity ftp 6
# logging origin-id hostname
# logging server 203.0.113.100 1 use-vrf management
# logging server 203.0.113.101 3 use-vrf default facility local6

- name: Delete all logging configuration
  cisco.nxos.nxos_logging_global:
    state: deleted

# Task output
# -------------
# before:
#   console:
#      severity: error
#    facilities:
#      - facility: auth
#        severity: critical
#      - facility: ftp
#        severity: informational
#      - facility: ospfv3
#        severity: alert
#    ip:
#      access_list:
#        cache:
#          entries: 16384
#          interval: 200
#          threshold: 5000
#    monitor:
#      severity: warning
#    origin_id:
#      hostname: true
#    hosts:
#      - severity: alert
#        host: 203.0.113.100
#        use_vrf: management
#      - facility: local6
#        severity: error
#        host: 203.0.113.101
#        use_vrf: default
#
# commands:
#   - "logging console"
#   - "logging monitor"
#   - "no logging ip access-list cache entries 16384"
#   - "no logging ip access-list cache interval 200"
#   - "no logging ip access-list cache threshold 5000"
#   - "no logging origin-id hostname"
#   - "no logging severity auth 2"
#   - "no logging severity ospfv3 1"
#   - "no logging severity ftp 6"
#   - "no logging server 203.0.113.100 1 use-vrf management"
#   - "no logging server 203.0.113.101 3 facility local6 use-vrf default"
#
# after: {}

# Using rendered

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_logging_global:
    config:
      console:
        severity: error
      monitor:
        severity: warning
      ip:
        access_list:
          cache:
            entries: 16384
            interval: 200
            threshold: 5000
      facilities:
        - facility: auth
          severity: critical
        - facility: ospfv3
          severity: alert
        - facility: ftp
          severity: informational
      hosts:
        - host: 203.0.113.100
          severity: alert
          use_vrf: management
        - host: 203.0.113.101
          severity: error
          facility: local6
          use_vrf: default
      origin_id:
        hostname: True

# Task Output (redacted)
# -----------------------
#  rendered:
#    - "logging console 3"
#    - "logging monitor 4"
#    - "logging ip access-list cache entries 16384"
#    - "logging ip access-list cache interval 200"
#    - "logging ip access-list cache threshold 5000"
#    - "logging severity auth 2"
#    - "logging severity ospfv3 1"
#    - "logging severity ftp 6"
#    - "logging server 203.0.113.100 1 use-vrf management"
#    - "logging server 203.0.113.101 3 facility local6 use-vrf default"
#    - "logging origin-id hostname"

# Using parsed

# parsed.cfg
# ------------
# logging console 3
# logging monitor 4
# logging ip access-list cache entries 16384
# logging ip access-list cache interval 200
# logging ip access-list cache threshold 5000
# logging severity auth 2
# logging severity ospfv3 1
# logging severity ftp 6
# logging origin-id hostname
# logging server 203.0.113.100 1 use-vrf management
# logging server 203.0.113.101 3 use-vrf default facility local6

- name: Parse externally provided logging configuration
  cisco.nxos.nxos_logging_global:
    running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
# parsed:
#   console:
#      severity: error
#    facilities:
#      - facility: auth
#        severity: critical
#      - facility: ftp
#        severity: informational
#      - facility: ospfv3
#        severity: alert
#    ip:
#      access_list:
#        cache:
#          entries: 16384
#          interval: 200
#          threshold: 5000
#    monitor:
#      severity: warning
#    origin_id:
#      hostname: true
#    hosts:
#      - severity: alert
#        host: 203.0.113.100
#        use_vrf: management
#      - facility: local6
#        severity: error
#        host: 203.0.113.101
#        use_vrf: default

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The resulting configuration after module execution. Sample: This output will always be in the same format as the module argspec.
before dictionary	when state is merged, replaced, overridden, deleted or purged	The configuration prior to the module execution. Sample: This output will always be in the same format as the module argspec.
commands list / elements=string	when state is merged, replaced, overridden, deleted or purged	The set of commands pushed to the remote device. Sample: ['logging console 3', 'logging monitor 4', 'logging ip access-list cache entries 16384', 'logging ip access-list cache interval 200', 'logging ip access-list cache threshold 5000']
gathered list / elements=string	when state is gathered	Facts about the network resource gathered from the remote device as structured data. Sample: This output will always be in the same format as the module argspec.
parsed list / elements=string	when state is parsed	The device native config provided in running_config option parsed into structured data as per module argspec. Sample: This output will always be in the same format as the module argspec.
rendered list / elements=string	when state is rendered	The provided configuration in the task rendered in device-native format (offline). Sample: ['logging ip access-list cache entries 4096', 'no logging ip access-list cache interval 200', 'no logging ip access-list cache threshold 5000', 'no logging origin-id hostname', 'logging origin-id ip 192.0.2.100', 'logging server 198.51.100.101 1 port 6538 use-vrf management']

Authors

Nilashish Chakraborty (@NilashishC)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/cisco/nxos/nxos_logging_global_module.html

Docs

Docs4dev

Title here

cisco.nxos.nxos_logging_global – Logging resource module.

Synopsis

Parameters

Notes

Examples

Return Values

Authors