community.network.ce_is_is_interface – Manages isis interface configuration on HUAWEI CloudEngine devices.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_is_is_interface.

New in version 0.2.0: of community.network

Synopsis

Manages isis process id, creates a isis instance id or deletes a process id on HUAWEI CloudEngine devices.

Parameters

Parameter	Choices/Defaults	Comments
bfdblocken boolean	Choices: no yes	Blocking interfaces to dynamically create BFD features. The value is a bool type.
bfdstaticen boolean	Choices: no yes	Configure static BFD on a specific interface enabled with ISIS. The value is a bool type.
ifname string / required		A L3 interface.
instance_id integer / required		Specifies the id of a isis process. The value is a number of 1 to 4294967295.
level1cost integer		Specifies the link cost of the interface when performing Level-1 SPF calculation. The value is a number of 0 to 16777215.
level1dispriority integer		the dispriority of the level1. The value is a number of 1 to 127.
level2cost integer		Specifies the link cost of the interface when performing Level-2 SPF calculation. The value is a number of 0 to 16777215.
level2dispriority integer		the dispriority of the level1. The value is a number of 1 to 127.
leveltype string	Choices: level_1 level_2 level_1_2	level type for three types.
p2pnegotiationmode string	Choices: 2_way 3_way 3_wayonly	Set the P2P neighbor negotiation type.
p2ppeeripignore boolean	Choices: no yes	When the P2P hello packet is received, no IP address check is performed. The value is a bool type.
ppposicpcheckenable boolean	Choices: no yes	Interface for setting PPP link protocol to check OSICP negotiation status. The value is a bool type.
silentcost boolean	Choices: no yes	Specifies whether the routing cost of the silent interface is 0. The value is a bool type.
silentenable boolean	Choices: no yes	enable the interface can send isis message. The value is a bool type.
snpacheck boolean	Choices: no yes	Enable SNPA check for LSPs and SNPs. The value is a bool type.
state string	Choices: present ← absent	Determines whether the config should be present or not on the device.
typep2penable boolean	Choices: no yes	Simulate the network type of the interface as P2P. The value is a bool type.

Notes

Note

Interface must already be a L3 port when using this module.
This module requires the netconf system service be enabled on the remote device being managed.
This module works with connection netconf.

Examples

- name: "create vlan and config vlanif"
  ce_config:
    lines: 'vlan {{ test_vlan_id }},quit,interface {{test_intf_vlanif}},ip address {{test_vlanif_ip}} 24'
    match: none

- name: "create eth-trunk and config eth-trunk"
  ce_config:
    lines: 'interface {{test_intf_trunk}},undo portswitch,ip address {{test_trunk_ip}} 24'
    match: none

- name: "create vpn instance"
  ce_config:
    lines: 'ip vpn-instance {{test_vpn}},ipv4-family'
    match: none

- name: Set isis circuit-level
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    leveltype: level_1_2
    state: present

- name: Set isis level1dispriority
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    level1dispriority: 0
    state: present

- name: Set isis level2dispriority
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    level2dispriority: 0
    state: present

- name: Set isis silentenable
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    silentenable: true
    state: present

- name: Set vpn name
  ce_is_is_instance:
    instance_id: 22
    vpn_name: vpn1
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of configuration after module execution Sample: {'session': {'addrType': 'IPV4', 'createType': 'SESS_STATIC', 'destAddr': None, 'outIfName': '10GE1/0/1', 'sessName': 'bfd_l2link', 'srcAddr': None, 'useDefaultIp': 'true', 'vrfName': None}}
existing dictionary	always	k/v pairs of existing configuration Sample: {'session': {}}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'addr_type': None, 'create_type': None, 'dest_addr': None, 'out_if_name': '10GE1/0/1', 'session_name': 'bfd_l2link', 'src_addr': None, 'state': 'present', 'use_default_ip': True, 'vrf_name': None}
updates list / elements=string	always	commands sent to the device Sample: ['bfd bfd_l2link bind peer-ip default-ip interface 10ge1/0/1']

Authors

xuxiaowei0512 (@CloudEngine-Ansible)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/ce_is_is_interface_module.html

Docs

Docs4dev

Title here