community.network.ce_lldp – Manages LLDP configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_lldp.

New in version 0.2.0: of community.network

Synopsis

Manages LLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
bind_name string		Binding interface name.
fast_count integer		The number of LLDP messages sent to the neighbor nodes by the specified device.
hold_multiplier integer		Time multiplier for device information in neighbor devices.
interval integer		Frequency at which LLDP advertisements are sent (in seconds).
lldpenable string	Choices: enabled disabled	Set global LLDP enable state.
management_address string		The management IP address of LLDP.
mdn_notification_interval integer		Delay time for sending MDN neighbor information change alarm.
mdnstatus string	Choices: rxOnly disabled	Set global MDN enable state.
notification_interval integer		Suppression time for sending LLDP alarm.
restart_delay integer		Specifies the delay time of the interface LLDP module from disabled state to re enable.
state string	Choices: present ← absent	Manage the state of the resource.
transmit_delay integer		Delay time for sending LLDP messages.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed.
Recommended connection is netconf.
This module also works with local connections for legacy playbooks.

Examples

- name: "Configure global LLDP enable state"
  community.network.ce_lldp:
    lldpenable: enabled

- name: "Configure global MDN enable state"
  community.network.ce_lldp:
    mdnstatus: rxOnly

- name: "Configure LLDP transmit interval and ensure global LLDP state is already enabled"
  community.network.ce_lldp:
    enable: enable
    interval: 32

- name: "Configure LLDP transmit multiplier hold and ensure global LLDP state is already enabled"
  community.network.ce_lldp:
    enable: enable
    hold_multiplier: 5

- name: "Configure the delay time of the interface LLDP module from disabled state to re enable"
  community.network.ce_lldp:
    enable: enable
    restart_delay: 3

- name: "Reset the delay time for sending LLDP messages"
  community.network.ce_lldp:
    enable: enable
    transmit_delay: 4

- name: "Configure device to send neighbor device information change alarm delay time"
  community.network.ce_lldp:
    lldpenable: enabled
    notification_interval: 6

- name: "Configure the number of LLDP messages sent to the neighbor nodes by the specified device"
  community.network.ce_lldp:
    enable: enable
    fast_count: 5

- name: "Configure the delay time for sending MDN neighbor information change alarm"
  community.network.ce_lldp:
    enable: enable
    mdn_notification_interval: 6
- name: "Configuring the management IP address of LLDP"
  community.network.ce_lldp:
    enable: enable
    management_address: 10.1.0.1

- name: "Configuring LLDP to manage the binding relationship between IP addresses and interfaces"
  community.network.ce_lldp:
    enable: enable
    bind_name: LoopBack2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of global LLDP configuration after module execution. Sample: {'bind_name': 'LoopBack2', 'fast_count': '5', 'hold_multiplier': '5', 'interval': '32', 'lldpenable': 'enabled', 'management_address': '10.1.0.1', 'mdn_notification_interval': '6', 'mdnstatus': 'rxOnly', 'notification_interval': '6', 'restart_delay': '3', 'transmit_delay': '4'}
existing dictionary	always	k/v pairs of existing global LLDP configuration. Sample: {'lldpenable': 'disabled', 'mdnstatus': 'disabled'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'bind_name': 'LoopBack2', 'fast_count': '5', 'hold_multiplier': '5', 'interval': '32', 'lldpenable': 'enabled', 'management_address': '10.1.0.1', 'mdn_notification_interval': '6', 'mdnstatus': 'rxOnly', 'notification_interval': '6', 'restart_delay': '3', 'state': 'present', 'transmit_delay': '4'}
updates list / elements=string	always	command sent to the device Sample: ['lldp enable', 'lldp mdn enable', 'lldp transmit interval 32', 'lldp transmit multiplier 5', 'lldp restart 3', 'lldp transmit delay 4', 'lldp trap-interval 6', 'lldp fast-count 5', 'lldp mdn trap-interval 6', 'lldp management-address 10.1.0.1', 'lldp management-address bind interface LoopBack 2']

Authors

xuxiaowei0512 (@CloudEngine-Ansible)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/ce_lldp_module.html

Docs

Docs4dev

Title here