f5networks.f5_modules.bigip_pool – Manages F5 BIG-IP LTM pools

Note

This plugin is part of the f5networks.f5_modules collection (version 1.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_pool.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

Manages F5 BIG-IP LTM pools via iControl REST API.

Parameters

Parameter		Choices/Defaults	Comments
aggregate list / elements=dictionary			List of pool definitions to be created, modified, or removed. When using `aggregates`, if one of the aggregate definitions is invalid, the aggregate run will fail, indicating the error it last encountered. The module will NOT rollback any changes it has made prior to encountering the error. The module also will not indicate which changes were made prior to failure. Therefore we strongly advise you run the module in `check` mode to ensure basic validation prior to executing this module. aliases: pools
description string			Specifies descriptive text that identifies the pool.
lb_method string		Choices: dynamic-ratio-member dynamic-ratio-node fastest-app-response fastest-node least-connections-member least-connections-node least-sessions observed-member observed-node predictive-member predictive-node ratio-least-connections-member ratio-least-connections-node ratio-member ratio-node ratio-session round-robin weighted-least-connections-member weighted-least-connections-node	Load balancing method. When creating a new pool, if this value is not specified, the default of `round-robin` is used.
metadata raw			Arbitrary key/value pairs you can attach to a pool. This is useful in situations where you might want to annotate a pool to be managed by Ansible. Key names are stored as strings; this includes names that are numbers. Values for all of the keys are stored as strings; this includes values that are numbers. Data will be persisted, not ephemeral.
monitor_type string		Choices: and_list m_of_n single	Monitor rule type when `monitors` is specified. When creating a new pool, if this value is not specified, the default of `and_list` is used. When `single`, ensures all specified monitors are checked, but additionally includes checks to make sure you only specified a single monitor. When `and_list`, ensures all monitors are checked. When `m_of_n`, ensures `quorum` of `monitors` are checked. `m_of_n` requires a `quorum` of 1 or greater be set either in the playbook, or already exist on the device. Both `single` and `and_list` are functionally identical, as BIG-IP considers all monitors as "a list".
monitors list / elements=string			Monitor template name list. If the partition is not provided as part of the monitor name, the `partition` option is used instead.
name string			Pool name aliases: pool
partition string		Default: "Common"	Device partition to manage resources on.
priority_group_activation integer			Specifies whether the system load balances traffic according to the priority number assigned to the pool member. When creating a new pool, if this parameter is not specified, the default of `0` is used. To disable this setting, provide the value `0`. Once you enable this setting, you can specify pool member priority when you create a new pool or on a pool member's properties screen. The system treats same-priority pool members as a group. To enable priority group activation, provide a number from `0` to `65535` that represents the minimum number of members that must be available in one priority group before the system directs traffic to members in a lower priority group. When a sufficient number of members become available in the higher priority group, the system again directs traffic to the higher priority group. aliases: minimum_active_members
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no ← yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
quorum integer			Monitor quorum value when `monitor_type` is `m_of_n`. Quorum must be a value of 1 or greater when `monitor_type` is `m_of_n`.
replace_all_with boolean		Choices: no ← yes	Removes pools not defined in the `aggregate` parameter. This operation is all or none, meaning it will stop if there are some pools that cannot be removed. aliases: purge
reselect_tries integer			Sets the number of times the system tries to contact a pool member after a passive failure.
service_down_action string		Choices: none reset drop reselect	Sets the action to take when node goes down in pool.
slow_ramp_time integer			Sets the ramp-up time (in seconds) to gradually ramp up the load on newly added or freshly detected up pool members.
state string		Choices: absent present ←	When `present`, guarantees the pool exists with the provided attributes. When `absent`, removes the pool from the system.

Notes

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create pool
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    lb_method: least-connections-member
    slow_ramp_time: 120
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Modify load balancer method
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    lb_method: round-robin
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Set a single monitor (with enforcement)
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    monitor_type: single
    monitors:
      - http
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Set a single monitor (without enforcement)
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    monitors:
      - http
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Set multiple monitors (all must succeed)
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    monitor_type: and_list
    monitors:
      - http
      - tcp
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Set multiple monitors (at least 1 must succeed)
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    monitor_type: m_of_n
    quorum: 1
    monitors:
      - http
      - tcp
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Delete pool
  bigip_pool:
    state: absent
    name: my-pool
    partition: Common
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Add metadata to pool
  bigip_pool:
    state: present
    name: my-pool
    partition: Common
    metadata:
      ansible: 2.4
      updated_at: 2017-12-20T17:50:46Z
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Add pools Aggregate
  bigip_pool:
    aggregate:
      - name: my-pool
        partition: Common
        lb_method: least-connections-member
        slow_ramp_time: 120
      - name: my-pool2
        partition: Common
        lb_method: least-sessions
        slow_ramp_time: 120
      - name: my-pool3
        partition: Common
        lb_method: round-robin
        slow_ramp_time: 120
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Add pools Aggregate, purge others
  bigip_pool:
    aggregate:
      - name: my-pool
        partition: Common
        lb_method: least-connections-member
        slow_ramp_time: 120
      - name: my-pool2
        partition: Common
        lb_method: least-sessions
        slow_ramp_time: 120
      - name: my-pool3
        partition: Common
        lb_method: round-robin
        slow_ramp_time: 120
    replace_all_with: yes
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
description string	changed	Description set on the pool. Sample: Pool of web servers
lb_method string	changed	The load balancing method set for the pool. Sample: round-robin
metadata dictionary	changed	The new value of the pool. Sample: {'key1': 'foo', 'key2': 'bar'}
monitor_type string	changed	Changed value for the monitor_type of the pool. Sample: m_of_n
monitors list / elements=string	changed	Monitors set on the pool. Sample: ['/Common/http', '/Common/gateway_icmp']
priority_group_activation integer	changed	The new minimum number of members to activate the priority group. Sample: 10
quorum integer	changed	The quorum that was set on the pool. Sample: 2
replace_all_with boolean	changed	Purges all non-aggregate pools from device Sample: True
reselect_tries integer	changed	The new value set for the number of tries to contact member. Sample: 10
service_down_action string	changed	Service down action that is set on the pool. Sample: reset
slow_ramp_time integer	changed	The new value set for the slow ramp-up time. Sample: 500

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/f5networks/f5_modules/bigip_pool_module.html

Docs

Docs4dev

Title here