Docs4dev
Docs
ansible / latest / collections / f5networks / f5_modules / bigip_snmp_trap_module.html

f5networks.f5_modules.bigip_snmp_trap – Manipulate SNMP trap information on a BIG-IP

Note

This plugin is part of the f5networks.f5_modules collection (version 1.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_snmp_trap.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

  • Manipulate SNMP trap information on a BIG-IP system.

Parameters

Parameter Choices/Defaults Comments
community
string
Specifies the community name for the trap destination.
destination
string
Specifies the address for the trap destination. This can be either an IP address or a hostname.
name
string / required
Name of the SNMP configuration endpoint.
network
string
    Choices:
  • other
  • management
  • default
Specifies the name of the trap network. This option is not supported in versions of BIG-IP prior to 12.1.0, and is simply ignored on those versions.
The value default was removed in BIG-IP version 13.1.0. Specifying this value when configuring a BIG-IP causes the module to stop and report an error. In this case, choose one of the other options, such as management.
partition
string
Default:
"Common"
Device partition to manage resources on.
port
string
Specifies the port for the trap destination.
provider
dictionary
added in 1.0.0 of f5networks.f5_modules
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no ←
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TELEMETRY_OFF.
Previously used variable F5_TEEM is deprecated as its name was confusing.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
snmp_version
string
    Choices:
  • 1
  • 2c
Specifies to which Simple Network Management Protocol (SNMP) version the trap destination applies.
state
string
    Choices:
  • present ←
  • absent
When present, ensures the resource exists.
When absent, ensures the resource does not exist.

Notes

Note

  • This module only supports version v1 and v2c of SNMP.
  • The network option is not supported on versions of BIG-IP prior to 12.1.0 because the platform did not support that option until 12.1.0. If used on versions prior to 12.1.0, it is simply be ignored.
  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create snmp v1 trap
  bigip_snmp_trap:
    community: general
    destination: 1.2.3.4
    name: my-trap1
    network: management
    port: 9000
    snmp_version: 1
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Create snmp v2 trap
  bigip_snmp_trap:
    community: general
    destination: 5.6.7.8
    name: my-trap2
    network: default
    port: 7000
    snmp_version: 2c
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
community
list / elements=string
changed and success
The new community name for the trap destination.

Sample:
secret
destination
string
changed and success
The new address for the trap destination in either IP or hostname form.

Sample:
1.2.3.4
network
string
changed and success
The new name of the network the SNMP trap is on.

Sample:
management
port
string
changed and success
The new port of the trap destination.

Sample:
900
snmp_version
string
changed and success
The new snmp_version configured on the remote device.

Sample:
2c


Authors

  • Tim Rupp (@caphrim007)
  • Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/f5networks/f5_modules/bigip_snmp_trap_module.html