fortinet.fortimanager.fmgr_wanprof_system_virtualwanlink – Configure redundant internet connections using SD-WAN
Note
This plugin is part of the fortinet.fortimanager collection (version 2.1.3).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install fortinet.fortimanager.
To use it in a playbook, specify: fortinet.fortimanager.fmgr_wanprof_system_virtualwanlink.
New in version 2.10: of fortinet.fortimanager
Synopsis
- This module is able to configure a FortiManager device.
- Examples include all parameters and values which need to be adjusted to data sources before usage.
Parameters
| Parameter | Choices/Defaults | Comments | |||
|---|---|---|---|---|---|
| adom
string / required
|
the parameter (adom) in requested url
|
||||
| bypass_validation
boolean
|
|
only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters
|
|||
| enable_log
boolean
|
|
Enable/Disable logging for task
|
|||
| proposed_method
string
|
|
The overridden method for the underlying Json RPC request
|
|||
| rc_failed
list / elements=string
|
the rc codes list with which the conditions to fail will be overriden
|
||||
| rc_succeeded
list / elements=string
|
the rc codes list with which the conditions to succeed will be overriden
|
||||
| state
string / required
|
|
the directive to create, update or delete an object
|
|||
| wanprof
string / required
|
the parameter (wanprof) in requested url
|
||||
| wanprof_system_virtualwanlink
dictionary
|
the top level parameters set
|
||||
| fail-detect
string
|
|
Enable/disable SD-WAN Internet connection status checking (failure detection).
|
|||
| health-check
list / elements=string
|
no description
|
||||
| _dynamic-server
string
|
no description
|
||||
| addr-mode
string
|
|
Address mode (IPv4 or IPv6).
|
|||
| diffservcode
string
|
Differentiated services code point (DSCP) in the IP header of the probe packet.
|
||||
| dns-request-domain
string
|
Fully qualified domain name to resolve for the DNS probe.
|
||||
| failtime
integer
|
Number of failures before server is considered lost (1 - 3600, default = 5).
|
||||
| ha-priority
integer
|
HA election priority (1 - 50).
|
||||
| http-agent
string
|
String in the http-agent field in the HTTP header.
|
||||
| http-get
string
|
URL used to communicate with the server if the protocol if the protocol is HTTP.
|
||||
| http-match
string
|
Response string expected from the server if the protocol is HTTP.
|
||||
| internet-service-id
string
|
Internet service ID.
|
||||
| interval
integer
|
Status check interval, or the time between attempting to connect to the server (1 - 3600 sec, default = 5).
|
||||
| members
string
|
Member sequence number list.
|
||||
| name
string
|
Status check or health check name.
|
||||
| packet-size
integer
|
Packet size of a twamp test session,
|
||||
| password
string
|
no description
|
||||
| port
integer
|
Port number used to communicate with the server over the selected protocol.
|
||||
| probe-count
integer
|
Number of most recent probes that should be used to calculate latency and jitter (5 - 30, default = 30).
|
||||
| probe-packets
string
|
|
Enable/disable transmission of probe packets.
|
|||
| probe-timeout
integer
|
Time to wait before a probe packet is considered lost (500 - 5000 msec, default = 500).
|
||||
| protocol
string
|
|
Protocol used to determine if the FortiGate can communicate with the server.
|
|||
| recoverytime
integer
|
Number of successful responses received before server is considered recovered (1 - 3600, default = 5).
|
||||
| security-mode
string
|
|
Twamp controller security mode.
|
|||
| server
string
|
no description
|
||||
| sla
list / elements=string
|
no description
|
||||
| id
integer
|
SLA ID.
|
||||
| jitter-threshold
integer
|
Jitter for SLA to make decision in milliseconds. (0 - 10000000, default = 5).
|
||||
| latency-threshold
integer
|
Latency for SLA to make decision in milliseconds. (0 - 10000000, default = 5).
|
||||
| link-cost-factor
list / elements=string
|
|
no description
|
|||
| packetloss-threshold
integer
|
Packet loss for SLA to make decision in percentage. (0 - 100, default = 0).
|
||||
| sla-fail-log-period
integer
|
Time interval in seconds that SLA fail log messages will be generated (0 - 3600, default = 0).
|
||||
| sla-pass-log-period
integer
|
Time interval in seconds that SLA pass log messages will be generated (0 - 3600, default = 0).
|
||||
| system-dns
string
|
|
Enable/disable system DNS as the probe server.
|
|||
| threshold-alert-jitter
integer
|
Alert threshold for jitter (ms, default = 0).
|
||||
| threshold-alert-latency
integer
|
Alert threshold for latency (ms, default = 0).
|
||||
| threshold-alert-packetloss
integer
|
Alert threshold for packet loss (percentage, default = 0).
|
||||
| threshold-warning-jitter
integer
|
Warning threshold for jitter (ms, default = 0).
|
||||
| threshold-warning-latency
integer
|
Warning threshold for latency (ms, default = 0).
|
||||
| threshold-warning-packetloss
integer
|
Warning threshold for packet loss (percentage, default = 0).
|
||||
| update-cascade-interface
string
|
|
Enable/disable update cascade interface.
|
|||
| update-static-route
string
|
|
Enable/disable updating the static route.
|
|||
| load-balance-mode
string
|
|
Algorithm or mode to use for load balancing Internet traffic to SD-WAN members.
|
|||
| members
list / elements=string
|
no description
|
||||
| _dynamic-member
string
|
no description
|
||||
| comment
string
|
Comments.
|
||||
| cost
integer
|
Cost of this interface for services in SLA mode (0 - 4294967295, default = 0).
|
||||
| gateway
string
|
The default gateway for this interface. Usually the default gateway of the Internet service provider that this interfa...
|
||||
| gateway6
string
|
IPv6 gateway.
|
||||
| ingress-spillover-threshold
integer
|
Ingress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, n...
|
||||
| interface
string
|
Interface name.
|
||||
| priority
integer
|
Priority of the interface (0 - 4294967295). Used for SD-WAN rules or priority rules.
|
||||
| seq-num
integer
|
Sequence number(1-255).
|
||||
| source
string
|
Source IP address used in the health-check packet to the server.
|
||||
| source6
string
|
Source IPv6 address used in the health-check packet to the server.
|
||||
| spillover-threshold
integer
|
Egress spillover threshold for this interface (0 - 16776000 kbit/s). When this traffic volume threshold is reached, ne...
|
||||
| status
string
|
|
Enable/disable this interface in the SD-WAN.
|
|||
| volume-ratio
integer
|
Measured volume ratio (this value / sum of all values = percentage of link volume, 0 - 255).
|
||||
| weight
integer
|
Weight of this interface for weighted load balancing. (0 - 255) More traffic is directed to interfaces with higher wei...
|
||||
| neighbor
list / elements=string
|
no description
|
||||
| health-check
string
|
SD-WAN health-check name.
|
||||
| ip
string
|
IP address of neighbor.
|
||||
| member
string
|
Member sequence number.
|
||||
| role
string
|
|
Role of neighbor.
|
|||
| sla-id
integer
|
SLA ID.
|
||||
| neighbor-hold-boot-time
integer
|
Waiting period in seconds when switching from the primary neighbor to the secondary neighbor from the neighbor start. (0 - 100...
|
||||
| neighbor-hold-down
string
|
|
Enable/disable hold switching from the secondary neighbor to the primary neighbor.
|
|||
| neighbor-hold-down-time
integer
|
Waiting period in seconds when switching from the secondary neighbor to the primary neighbor when hold-down is disabled. (0 - ...
|
||||
| service
list / elements=string
|
no description
|
||||
| addr-mode
string
|
|
Address mode (IPv4 or IPv6).
|
|||
| bandwidth-weight
integer
|
Coefficient of reciprocal of available bidirectional bandwidth in the formula of custom-profile-1.
|
||||
| default
string
|
|
Enable/disable use of SD-WAN as default service.
|
|||
| dscp-forward
string
|
|
Enable/disable forward traffic DSCP tag.
|
|||
| dscp-forward-tag
string
|
Forward traffic DSCP tag.
|
||||
| dscp-reverse
string
|
|
Enable/disable reverse traffic DSCP tag.
|
|||
| dscp-reverse-tag
string
|
Reverse traffic DSCP tag.
|
||||
| dst
string
|
Destination address name.
|
||||
| dst-negate
string
|
|
Enable/disable negation of destination address match.
|
|||
| dst6
string
|
Destination address6 name.
|
||||
| end-port
integer
|
End destination port number.
|
||||
| gateway
string
|
|
Enable/disable SD-WAN service gateway.
|
|||
| groups
string
|
User groups.
|
||||
| health-check
string
|
Health check.
|
||||
| hold-down-time
integer
|
Waiting period in seconds when switching from the back-up member to the primary member (0 - 10000000, default = 0).
|
||||
| id
integer
|
Priority rule ID (1 - 4000).
|
||||
| input-device
string
|
Source interface name.
|
||||
| internet-service
string
|
|
Enable/disable use of Internet service for application-based load balancing.
|
|||
| internet-service-app-ctrl
integer
|
no description
|
||||
| internet-service-app-ctrl-group
string
|
Application control based Internet Service group list.
|
||||
| internet-service-ctrl
integer
|
no description
|
||||
| internet-service-ctrl-group
string
|
Control-based Internet Service group list.
|
||||
| internet-service-custom
string
|
Custom Internet service name list.
|
||||
| internet-service-custom-group
string
|
Custom Internet Service group list.
|
||||
| internet-service-group
string
|
Internet Service group list.
|
||||
| internet-service-id
string
|
Internet service ID list.
|
||||
| internet-service-name
string
|
Internet service name list.
|
||||
| jitter-weight
integer
|
Coefficient of jitter in the formula of custom-profile-1.
|
||||
| latency-weight
integer
|
Coefficient of latency in the formula of custom-profile-1.
|
||||
| link-cost-factor
string
|
|
Link cost factor.
|
|||
| link-cost-threshold
integer
|
Percentage threshold change of link cost values that will result in policy route regeneration (0 - 10000000, default =...
|
||||
| member
string
|
Member sequence number.
|
||||
| mode
string
|
|
Control how the priority rule sets the priority of interfaces in the SD-WAN.
|
|||
| name
string
|
Priority rule name.
|
||||
| packet-loss-weight
integer
|
Coefficient of packet-loss in the formula of custom-profile-1.
|
||||
| priority-members
string
|
Member sequence number list.
|
||||
| protocol
integer
|
Protocol number.
|
||||
| quality-link
integer
|
Quality grade.
|
||||
| role
string
|
|
Service role to work with neighbor.
|
|||
| route-tag
integer
|
IPv4 route map route-tag.
|
||||
| sla
list / elements=string
|
no description
|
||||
| health-check
string
|
Virtual WAN Link health-check.
|
||||
| id
integer
|
SLA ID.
|
||||
| sla-compare-method
string
|
|
Method to compare SLA value for sla and load balance mode.
|
|||
| src
string
|
Source address name.
|
||||
| src-negate
string
|
|
Enable/disable negation of source address match.
|
|||
| src6
string
|
Source address6 name.
|
||||
| standalone-action
string
|
|
Enable/disable service when selected neighbor role is standalone while service role is not standalone.
|
|||
| start-port
integer
|
Start destination port number.
|
||||
| status
string
|
|
Enable/disable SD-WAN service.
|
|||
| tos
string
|
Type of service bit pattern.
|
||||
| tos-mask
string
|
Type of service evaluated bits.
|
||||
| users
string
|
User name.
|
||||
| status
string
|
|
Enable/disable SD-WAN.
|
|||
| workspace_locking_adom
string
|
the adom to lock for FortiManager running in workspace mode, the value can be global and others including root
|
||||
| workspace_locking_timeout
integer
|
Default:
300
|
the maximum time in seconds to wait for other user to release the workspace lock
|
|||
Notes
Note
- Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.
- To create or update an object, use state present directive.
- To delete an object, use state absent directive.
- Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded
Examples
- hosts: fortimanager-inventory
collections:
- fortinet.fortimanager
connection: httpapi
vars:
ansible_httpapi_use_ssl: True
ansible_httpapi_validate_certs: False
ansible_httpapi_port: 443
tasks:
- name: Configure redundant internet connections using SD-WAN
fmgr_wanprof_system_virtualwanlink:
bypass_validation: False
workspace_locking_adom: <value in [global, custom adom including root]>
workspace_locking_timeout: 300
rc_succeeded: [0, -2, -3, ...]
rc_failed: [-2, -3, ...]
adom: <your own value>
wanprof: <your own value>
wanprof_system_virtualwanlink:
fail-detect: <value in [disable, enable]>
health-check:
-
_dynamic-server: <value of string>
addr-mode: <value in [ipv4, ipv6]>
failtime: <value of integer>
http-agent: <value of string>
http-get: <value of string>
http-match: <value of string>
interval: <value of integer>
members: <value of string>
name: <value of string>
packet-size: <value of integer>
password: <value of string>
port: <value of integer>
protocol: <value in [ping, tcp-echo, udp-echo, ...]>
recoverytime: <value of integer>
security-mode: <value in [none, authentication]>
server: <value of string>
sla:
-
id: <value of integer>
jitter-threshold: <value of integer>
latency-threshold: <value of integer>
link-cost-factor:
- latency
- jitter
- packet-loss
packetloss-threshold: <value of integer>
threshold-alert-jitter: <value of integer>
threshold-alert-latency: <value of integer>
threshold-alert-packetloss: <value of integer>
threshold-warning-jitter: <value of integer>
threshold-warning-latency: <value of integer>
threshold-warning-packetloss: <value of integer>
update-cascade-interface: <value in [disable, enable]>
update-static-route: <value in [disable, enable]>
internet-service-id: <value of string>
probe-packets: <value in [disable, enable]>
sla-fail-log-period: <value of integer>
sla-pass-log-period: <value of integer>
ha-priority: <value of integer>
diffservcode: <value of string>
probe-timeout: <value of integer>
dns-request-domain: <value of string>
probe-count: <value of integer>
system-dns: <value in [disable, enable]>
load-balance-mode: <value in [source-ip-based, weight-based, usage-based, ...]>
members:
-
_dynamic-member: <value of string>
comment: <value of string>
gateway: <value of string>
gateway6: <value of string>
ingress-spillover-threshold: <value of integer>
interface: <value of string>
priority: <value of integer>
seq-num: <value of integer>
source: <value of string>
source6: <value of string>
spillover-threshold: <value of integer>
status: <value in [disable, enable]>
volume-ratio: <value of integer>
weight: <value of integer>
cost: <value of integer>
service:
-
addr-mode: <value in [ipv4, ipv6]>
bandwidth-weight: <value of integer>
default: <value in [disable, enable]>
dscp-forward: <value in [disable, enable]>
dscp-forward-tag: <value of string>
dscp-reverse: <value in [disable, enable]>
dscp-reverse-tag: <value of string>
dst: <value of string>
dst-negate: <value in [disable, enable]>
dst6: <value of string>
end-port: <value of integer>
gateway: <value in [disable, enable]>
groups: <value of string>
health-check: <value of string>
hold-down-time: <value of integer>
id: <value of integer>
internet-service: <value in [disable, enable]>
internet-service-ctrl: <value of integer>
internet-service-ctrl-group: <value of string>
internet-service-custom: <value of string>
internet-service-custom-group: <value of string>
internet-service-group: <value of string>
internet-service-id: <value of string>
jitter-weight: <value of integer>
latency-weight: <value of integer>
link-cost-factor: <value in [latency, jitter, packet-loss, ...]>
link-cost-threshold: <value of integer>
member: <value of string>
mode: <value in [auto, manual, priority, ...]>
name: <value of string>
packet-loss-weight: <value of integer>
priority-members: <value of string>
protocol: <value of integer>
quality-link: <value of integer>
route-tag: <value of integer>
sla:
-
health-check: <value of string>
id: <value of integer>
src: <value of string>
src-negate: <value in [disable, enable]>
src6: <value of string>
start-port: <value of integer>
status: <value in [disable, enable]>
tos: <value of string>
tos-mask: <value of string>
users: <value of string>
internet-service-app-ctrl: <value of integer>
internet-service-app-ctrl-group: <value of string>
role: <value in [primary, secondary, standalone]>
sla-compare-method: <value in [order, number]>
standalone-action: <value in [disable, enable]>
input-device: <value of string>
internet-service-name: <value of string>
status: <value in [disable, enable]>
neighbor:
-
health-check: <value of string>
ip: <value of string>
member: <value of string>
role: <value in [primary, secondary, standalone]>
sla-id: <value of integer>
neighbor-hold-boot-time: <value of integer>
neighbor-hold-down: <value in [disable, enable]>
neighbor-hold-down-time: <value of integer>
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| request_url
string
|
always |
The full url requested
Sample:
/sys/login/user
|
| response_code
integer
|
always |
The status of api request
|
| response_message
string
|
always |
The descriptive message of the api response
Sample:
OK.
|
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Frank Shen (@fshen01)
- Hongbin Lu (@fgtdev-hblu)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortimanager/fmgr_wanprof_system_virtualwanlink_module.html