On this page
fortinet.fortios.fortios_extender_controller_extender – Extender controller configuration in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.2).
You might already have this collection installed if you are using the ansible
package. It is not included in ansible-core
. To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_extender_controller_extender
.
New in version 2.10: of fortinet.fortios
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify extender_controller feature and extender category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
- ansible>=2.9.0
Parameters
Parameter | Choices/Defaults | Comments | |||
---|---|---|---|---|---|
access_token
string
|
Token-based authentication. Generated from GUI of Fortigate.
|
||||
enable_log
boolean
|
|
Enable/Disable logging for task.
|
|||
extender_controller_extender
dictionary
|
Extender controller configuration.
|
||||
aaa_shared_secret
string
|
AAA shared secret.
|
||||
access_point_name
string
|
Access point name(APN).
|
||||
admin
string
|
|
FortiExtender Administration (enable or disable).
|
|||
at_dial_script
string
|
Initialization AT commands specific to the MODEM.
|
||||
authorized
string
|
|
FortiExtender Administration (enable or disable).
|
|||
billing_start_day
integer
|
Billing start day.
|
||||
cdma_aaa_spi
string
|
CDMA AAA SPI.
|
||||
cdma_ha_spi
string
|
CDMA HA SPI.
|
||||
cdma_nai
string
|
NAI for CDMA MODEMS.
|
||||
conn_status
integer
|
Connection status.
|
||||
controller_report
dictionary
|
FortiExtender controller report configuration.
|
||||
interval
integer
|
Controller report interval.
|
||||
signal_threshold
integer
|
Controller report signal threshold.
|
||||
status
string
|
|
FortiExtender controller report status.
|
|||
description
string
|
Description.
|
||||
dial_mode
string
|
|
Dial mode (dial-on-demand or always-connect).
|
|||
dial_status
integer
|
Dial status.
|
||||
ext_name
string
|
FortiExtender name.
|
||||
ha_shared_secret
string
|
HA shared secret.
|
||||
id
string / required
|
FortiExtender serial number.
|
||||
ifname
string
|
FortiExtender interface name. Source system.interface.name.
|
||||
initiated_update
string
|
|
Allow/disallow network initiated updates to the MODEM.
|
|||
login_password
string
|
FortiExtender login password.
|
||||
mode
string
|
|
FortiExtender mode.
|
|||
modem1
dictionary
|
Configuration options for modem 1.
|
||||
auto_switch
dictionary
|
FortiExtender auto switch configuration.
|
||||
dataplan
string
|
|
Automatically switch based on data usage.
|
|||
disconnect
string
|
|
Auto switch by disconnect.
|
|||
disconnect_period
integer
|
Automatically switch based on disconnect period.
|
||||
disconnect_threshold
integer
|
Automatically switch based on disconnect threshold.
|
||||
signal
string
|
|
Automatically switch based on signal strength.
|
|||
switch_back
string
|
|
Auto switch with switch back multi-options.
|
|||
switch_back_time
string
|
Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
|
||||
switch_back_timer
integer
|
Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
|
||||
conn_status
integer
|
Connection status.
|
||||
default_sim
string
|
|
Default SIM selection.
|
|||
gps
string
|
|
FortiExtender GPS enable/disable.
|
|||
ifname
string
|
FortiExtender interface name. Source system.interface.name.
|
||||
preferred_carrier
string
|
Preferred carrier.
|
||||
redundant_intf
string
|
Redundant interface.
|
||||
redundant_mode
string
|
|
FortiExtender mode.
|
|||
sim1_pin
string
|
|
SIM
|
|||
sim1_pin_code
string
|
SIM
|
||||
sim2_pin
string
|
|
SIM
|
|||
sim2_pin_code
string
|
SIM
|
||||
modem2
dictionary
|
Configuration options for modem 2.
|
||||
auto_switch
dictionary
|
FortiExtender auto switch configuration.
|
||||
dataplan
string
|
|
Automatically switch based on data usage.
|
|||
disconnect
string
|
|
Auto switch by disconnect.
|
|||
disconnect_period
integer
|
Automatically switch based on disconnect period.
|
||||
disconnect_threshold
integer
|
Automatically switch based on disconnect threshold.
|
||||
signal
string
|
|
Automatically switch based on signal strength.
|
|||
switch_back
string
|
|
Auto switch with switch back multi-options.
|
|||
switch_back_time
string
|
Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
|
||||
switch_back_timer
integer
|
Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
|
||||
conn_status
integer
|
Connection status.
|
||||
default_sim
string
|
|
Default SIM selection.
|
|||
gps
string
|
|
FortiExtender GPS enable/disable.
|
|||
ifname
string
|
FortiExtender interface name. Source system.interface.name.
|
||||
preferred_carrier
string
|
Preferred carrier.
|
||||
redundant_intf
string
|
Redundant interface.
|
||||
redundant_mode
string
|
|
FortiExtender mode.
|
|||
sim1_pin
string
|
|
SIM
|
|||
sim1_pin_code
string
|
SIM
|
||||
sim2_pin
string
|
|
SIM
|
|||
sim2_pin_code
string
|
SIM
|
||||
modem_passwd
string
|
MODEM password.
|
||||
modem_type
string
|
|
MODEM type (CDMA, GSM/LTE or WIMAX).
|
|||
multi_mode
string
|
|
MODEM mode of operation(3G,LTE,etc).
|
|||
name
string
|
FortiExtender entry name.
|
||||
ppp_auth_protocol
string
|
|
PPP authentication protocol (PAP,CHAP or auto).
|
|||
ppp_echo_request
string
|
|
Enable/disable PPP echo request.
|
|||
ppp_password
string
|
PPP password.
|
||||
ppp_username
string
|
PPP username.
|
||||
primary_ha
string
|
Primary HA.
|
||||
quota_limit_mb
integer
|
Monthly quota limit (MB).
|
||||
redial
string
|
|
Number of redials allowed based on failed attempts.
|
|||
redundant_intf
string
|
Redundant interface.
|
||||
roaming
string
|
|
Enable/disable MODEM roaming.
|
|||
role
string
|
|
FortiExtender work role(Primary, Secondary, None).
|
|||
secondary_ha
string
|
Secondary HA.
|
||||
sim_pin
string
|
SIM PIN.
|
||||
vdom
integer
|
VDOM
|
||||
wimax_auth_protocol
string
|
|
WiMax authentication protocol(TLS or TTLS).
|
|||
wimax_carrier
string
|
WiMax carrier.
|
||||
wimax_realm
string
|
WiMax realm.
|
||||
state
string / required
|
|
Indicates whether to create or remove the object.
|
|||
vdom
string
|
Default:
"root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
Notes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Extender controller configuration.
fortios_extender_controller_extender:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
extender_controller_extender:
aaa_shared_secret: "<your_own_value>"
access_point_name: "<your_own_value>"
admin: "disable"
at_dial_script: "<your_own_value>"
authorized: "disable"
billing_start_day: "8"
cdma_aaa_spi: "<your_own_value>"
cdma_ha_spi: "<your_own_value>"
cdma_nai: "<your_own_value>"
conn_status: "12"
controller_report:
interval: "14"
signal_threshold: "15"
status: "disable"
description: "<your_own_value>"
dial_mode: "dial-on-demand"
dial_status: "19"
ext_name: "<your_own_value>"
ha_shared_secret: "<your_own_value>"
id: "22"
ifname: "<your_own_value> (source system.interface.name)"
initiated_update: "enable"
login_password: "<your_own_value>"
mode: "standalone"
modem_passwd: "<your_own_value>"
modem_type: "cdma"
modem1:
auto_switch:
dataplan: "disable"
disconnect: "disable"
disconnect_period: "33"
disconnect_threshold: "34"
signal: "disable"
switch_back: "time"
switch_back_time: "<your_own_value>"
switch_back_timer: "38"
conn_status: "39"
default_sim: "sim1"
gps: "disable"
ifname: "<your_own_value> (source system.interface.name)"
preferred_carrier: "<your_own_value>"
redundant_intf: "<your_own_value>"
redundant_mode: "disable"
sim1_pin: "disable"
sim1_pin_code: "<your_own_value>"
sim2_pin: "disable"
sim2_pin_code: "<your_own_value>"
modem2:
auto_switch:
dataplan: "disable"
disconnect: "disable"
disconnect_period: "54"
disconnect_threshold: "55"
signal: "disable"
switch_back: "time"
switch_back_time: "<your_own_value>"
switch_back_timer: "59"
conn_status: "60"
default_sim: "sim1"
gps: "disable"
ifname: "<your_own_value> (source system.interface.name)"
preferred_carrier: "<your_own_value>"
redundant_intf: "<your_own_value>"
redundant_mode: "disable"
sim1_pin: "disable"
sim1_pin_code: "<your_own_value>"
sim2_pin: "disable"
sim2_pin_code: "<your_own_value>"
multi_mode: "auto"
name: "default_name_72"
ppp_auth_protocol: "auto"
ppp_echo_request: "enable"
ppp_password: "<your_own_value>"
ppp_username: "<your_own_value>"
primary_ha: "<your_own_value>"
quota_limit_mb: "78"
redial: "none"
redundant_intf: "<your_own_value>"
roaming: "enable"
role: "none"
secondary_ha: "<your_own_value>"
sim_pin: "<your_own_value>"
vdom: "85"
wimax_auth_protocol: "tls"
wimax_carrier: "<your_own_value>"
wimax_realm: "<your_own_value>"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
status
string
|
always |
Indication of the operation's result
Sample:
success
|
vdom
string
|
always |
Virtual domain used
Sample:
root
|
version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_extender_controller_extender_module.html