On this page
fortinet.fortios.fortios_firewall_policy6 – Configure IPv6 policies in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.2).
You might already have this collection installed if you are using the ansible
package. It is not included in ansible-core
. To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy6
.
New in version 2.10: of fortinet.fortios
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
- ansible>=2.9.0
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
access_token
string
|
Token-based authentication. Generated from GUI of Fortigate.
|
|||
enable_log
boolean
|
|
Enable/Disable logging for task.
|
||
firewall_policy6
dictionary
|
Configure IPv6 policies.
|
|||
action
string
|
|
Policy action (allow/deny/ipsec).
|
||
anti_replay
string
|
|
Enable/disable anti-replay check.
|
||
app_category
list / elements=string
|
Application category ID list.
|
|||
id
integer / required
|
Category IDs.
|
|||
app_group
list / elements=string
|
Application group names.
|
|||
name
string / required
|
Application group names. Source application.group.name.
|
|||
application
list / elements=string
|
Application ID list.
|
|||
id
integer / required
|
Application IDs.
|
|||
application_list
string
|
Name of an existing Application list. Source application.list.name.
|
|||
auto_asic_offload
string
|
|
Enable/disable policy traffic ASIC offloading.
|
||
av_profile
string
|
Name of an existing Antivirus profile. Source antivirus.profile.name.
|
|||
cifs_profile
string
|
Name of an existing CIFS profile. Source cifs.profile.name.
|
|||
comments
string
|
Comment.
|
|||
custom_log_fields
list / elements=string
|
Log field index numbers to append custom log fields to log messages for this policy.
|
|||
field_id
string
|
Custom log field. Source log.custom-field.id.
|
|||
devices
list / elements=string
|
Names of devices or device groups that can be matched by the policy.
|
|||
name
string / required
|
Device or group name. Source user.device.alias user.device-group.name user.device-category.name.
|
|||
diffserv_forward
string
|
|
Enable to change packet"s DiffServ values to the specified diffservcode-forward value.
|
||
diffserv_reverse
string
|
|
Enable to change packet"s reverse (reply) DiffServ values to the specified diffservcode-rev value.
|
||
diffservcode_forward
string
|
Change packet"s DiffServ to this value.
|
|||
diffservcode_rev
string
|
Change packet"s reverse (reply) DiffServ to this value.
|
|||
dlp_sensor
string
|
Name of an existing DLP sensor. Source dlp.sensor.name.
|
|||
dnsfilter_profile
string
|
Name of an existing DNS filter profile. Source dnsfilter.profile.name.
|
|||
dscp_match
string
|
|
Enable DSCP check.
|
||
dscp_negate
string
|
|
Enable negated DSCP match.
|
||
dscp_value
string
|
DSCP value.
|
|||
dsri
string
|
|
Enable DSRI to ignore HTTP server responses.
|
||
dstaddr
list / elements=string
|
Destination address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name.
|
|||
dstaddr_negate
string
|
|
When enabled dstaddr specifies what the destination address must NOT be.
|
||
dstintf
list / elements=string
|
Outgoing (egress) interface.
|
|||
name
string / required
|
Interface name. Source system.interface.name system.zone.name.
|
|||
emailfilter_profile
string
|
Name of an existing email filter profile. Source emailfilter.profile.name.
|
|||
firewall_session_dirty
string
|
|
How to handle sessions if the configuration of this firewall policy changes.
|
||
fixedport
string
|
|
Enable to prevent source NAT from changing a session"s source port.
|
||
fsso_groups
list / elements=string
|
Names of FSSO groups.
|
|||
name
string / required
|
Names of FSSO groups. Source user.adgrp.name.
|
|||
global_label
string
|
Label for the policy that appears when the GUI is in Global View mode.
|
|||
groups
list / elements=string
|
Names of user groups that can authenticate with this policy.
|
|||
name
string / required
|
Group name. Source user.group.name.
|
|||
http_policy_redirect
string
|
|
Redirect HTTP(S) traffic to matching transparent web proxy policy.
|
||
icap_profile
string
|
Name of an existing ICAP profile. Source icap.profile.name.
|
|||
inbound
string
|
|
Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN.
|
||
inspection_mode
string
|
|
Policy inspection mode (Flow/proxy). Default is Flow mode.
|
||
ippool
string
|
|
Enable to use IP Pools for source NAT.
|
||
ips_sensor
string
|
Name of an existing IPS sensor. Source ips.sensor.name.
|
|||
label
string
|
Label for the policy that appears when the GUI is in Section View mode.
|
|||
logtraffic
string
|
|
Enable or disable logging. Log all sessions or security profile sessions.
|
||
logtraffic_start
string
|
|
Record logs when a session starts and ends.
|
||
mms_profile
string
|
Name of an existing MMS profile. Source firewall.mms-profile.name.
|
|||
name
string
|
Policy name.
|
|||
nat
string
|
|
Enable/disable source NAT.
|
||
natinbound
string
|
|
Policy-based IPsec VPN: apply destination NAT to inbound traffic.
|
||
natoutbound
string
|
|
Policy-based IPsec VPN: apply source NAT to outbound traffic.
|
||
np_acceleration
string
|
|
Enable/disable UTM Network Processor acceleration.
|
||
outbound
string
|
|
Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.
|
||
per_ip_shaper
string
|
Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.
|
|||
policyid
integer / required
|
Policy ID.
|
|||
poolname
list / elements=string
|
IP Pool names.
|
|||
name
string / required
|
IP pool name. Source firewall.ippool6.name.
|
|||
profile_group
string
|
Name of profile group. Source firewall.profile-group.name.
|
|||
profile_protocol_options
string
|
Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.
|
|||
profile_type
string
|
|
Determine whether the firewall policy allows security profile groups or single profiles only.
|
||
replacemsg_override_group
string
|
Override the default replacement message group for this policy. Source system.replacemsg-group.name.
|
|||
rsso
string
|
|
Enable/disable RADIUS single sign-on (RSSO).
|
||
schedule
string
|
Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
|
|||
send_deny_packet
string
|
|
Enable/disable return of deny-packet.
|
||
service
list / elements=string
|
Service and service group names.
|
|||
name
string / required
|
Address name. Source firewall.service.custom.name firewall.service.group.name.
|
|||
service_negate
string
|
|
When enabled service specifies what the service must NOT be.
|
||
session_ttl
integer
|
Session TTL in seconds for sessions accepted by this policy. 0 means use the system default session TTL.
|
|||
spamfilter_profile
string
|
Name of an existing Spam filter profile. Source spamfilter.profile.name.
|
|||
srcaddr
list / elements=string
|
Source address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address6.name firewall.addrgrp6.name.
|
|||
srcaddr_negate
string
|
|
When enabled srcaddr specifies what the source address must NOT be.
|
||
srcintf
list / elements=string
|
Incoming (ingress) interface.
|
|||
name
string / required
|
Interface name. Source system.zone.name system.interface.name.
|
|||
ssh_filter_profile
string
|
Name of an existing SSH filter profile. Source ssh-filter.profile.name.
|
|||
ssh_policy_redirect
string
|
|
Redirect SSH traffic to matching transparent proxy policy.
|
||
ssl_mirror
string
|
|
Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring).
|
||
ssl_mirror_intf
list / elements=string
|
SSL mirror interface name.
|
|||
name
string / required
|
Interface name. Source system.zone.name system.interface.name.
|
|||
ssl_ssh_profile
string
|
Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.
|
|||
status
string
|
|
Enable or disable this policy.
|
||
tcp_mss_receiver
integer
|
Receiver TCP maximum segment size (MSS).
|
|||
tcp_mss_sender
integer
|
Sender TCP maximum segment size (MSS).
|
|||
tcp_session_without_syn
string
|
|
Enable/disable creation of TCP session without SYN flag.
|
||
timeout_send_rst
string
|
|
Enable/disable sending RST packets when TCP sessions expire.
|
||
tos
string
|
ToS (Type of Service) value used for comparison.
|
|||
tos_mask
string
|
Non-zero bit positions are used for comparison while zero bit positions are ignored.
|
|||
tos_negate
string
|
|
Enable negated TOS match.
|
||
traffic_shaper
string
|
Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.
|
|||
traffic_shaper_reverse
string
|
Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.
|
|||
url_category
list / elements=string
|
URL category ID list.
|
|||
id
integer / required
|
URL category ID.
|
|||
users
list / elements=string
|
Names of individual users that can authenticate with this policy.
|
|||
name
string / required
|
Names of individual users that can authenticate with this policy. Source user.local.name.
|
|||
utm_status
string
|
|
Enable AV/web/ips protection profile.
|
||
uuid
string
|
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
|
|||
vlan_cos_fwd
integer
|
VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest
|
|||
vlan_cos_rev
integer
|
VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest
|
|||
vlan_filter
string
|
Set VLAN filters.
|
|||
voip_profile
string
|
Name of an existing VoIP profile. Source voip.profile.name.
|
|||
vpntunnel
string
|
Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name.
|
|||
waf_profile
string
|
Name of an existing Web application firewall profile. Source waf.profile.name.
|
|||
webcache
string
|
|
Enable/disable web cache.
|
||
webcache_https
string
|
|
Enable/disable web cache for HTTPS.
|
||
webfilter_profile
string
|
Name of an existing Web filter profile. Source webfilter.profile.name.
|
|||
webproxy_forward_server
string
|
Web proxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.
|
|||
webproxy_profile
string
|
Webproxy profile name. Source web-proxy.profile.name.
|
|||
state
string / required
|
|
Indicates whether to create or remove the object.
|
||
vdom
string
|
Default:
"root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
Notes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure IPv6 policies.
fortios_firewall_policy6:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_policy6:
action: "accept"
anti_replay: "enable"
app_category:
-
id: "6"
app_group:
-
name: "default_name_8 (source application.group.name)"
application:
-
id: "10"
application_list: "<your_own_value> (source application.list.name)"
auto_asic_offload: "enable"
av_profile: "<your_own_value> (source antivirus.profile.name)"
cifs_profile: "<your_own_value> (source cifs.profile.name)"
comments: "<your_own_value>"
custom_log_fields:
-
field_id: "<your_own_value> (source log.custom-field.id)"
devices:
-
name: "default_name_19 (source user.device.alias user.device-group.name user.device-category.name)"
diffserv_forward: "enable"
diffserv_reverse: "enable"
diffservcode_forward: "<your_own_value>"
diffservcode_rev: "<your_own_value>"
dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)"
dscp_match: "enable"
dscp_negate: "enable"
dscp_value: "<your_own_value>"
dsri: "enable"
dstaddr:
-
name: "default_name_31 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name)"
dstaddr_negate: "enable"
dstintf:
-
name: "default_name_34 (source system.interface.name system.zone.name)"
emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
firewall_session_dirty: "check-all"
fixedport: "enable"
fsso_groups:
-
name: "default_name_39 (source user.adgrp.name)"
global_label: "<your_own_value>"
groups:
-
name: "default_name_42 (source user.group.name)"
http_policy_redirect: "enable"
icap_profile: "<your_own_value> (source icap.profile.name)"
inbound: "enable"
inspection_mode: "proxy"
ippool: "enable"
ips_sensor: "<your_own_value> (source ips.sensor.name)"
label: "<your_own_value>"
logtraffic: "all"
logtraffic_start: "enable"
mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
name: "default_name_53"
nat: "enable"
natinbound: "enable"
natoutbound: "enable"
np_acceleration: "enable"
outbound: "enable"
per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
policyid: "60"
poolname:
-
name: "default_name_62 (source firewall.ippool6.name)"
profile_group: "<your_own_value> (source firewall.profile-group.name)"
profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
profile_type: "single"
replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
rsso: "enable"
schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
send_deny_packet: "enable"
service:
-
name: "default_name_71 (source firewall.service.custom.name firewall.service.group.name)"
service_negate: "enable"
session_ttl: "73"
spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
srcaddr:
-
name: "default_name_76 (source firewall.address6.name firewall.addrgrp6.name)"
srcaddr_negate: "enable"
srcintf:
-
name: "default_name_79 (source system.zone.name system.interface.name)"
ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
ssh_policy_redirect: "enable"
ssl_mirror: "enable"
ssl_mirror_intf:
-
name: "default_name_84 (source system.zone.name system.interface.name)"
ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
status: "enable"
tcp_mss_receiver: "87"
tcp_mss_sender: "88"
tcp_session_without_syn: "all"
timeout_send_rst: "enable"
tos: "<your_own_value>"
tos_mask: "<your_own_value>"
tos_negate: "enable"
traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
url_category:
-
id: "97"
users:
-
name: "default_name_99 (source user.local.name)"
utm_status: "enable"
uuid: "<your_own_value>"
vlan_cos_fwd: "102"
vlan_cos_rev: "103"
vlan_filter: "<your_own_value>"
voip_profile: "<your_own_value> (source voip.profile.name)"
vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
waf_profile: "<your_own_value> (source waf.profile.name)"
webcache: "enable"
webcache_https: "disable"
webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
status
string
|
always |
Indication of the operation's result
Sample:
success
|
vdom
string
|
always |
Virtual domain used
Sample:
root
|
version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_policy6_module.html