On this page
fortinet.fortios.fortios_firewall_shaping_policy – Configure shaping policies in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.2).
You might already have this collection installed if you are using the ansible
package. It is not included in ansible-core
. To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_shaping_policy
.
New in version 2.10: of fortinet.fortios
Synopsis
- This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and shaping_policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
- ansible>=2.9.0
Parameters
Parameter | Choices/Defaults | Comments | ||
---|---|---|---|---|
access_token
string
|
Token-based authentication. Generated from GUI of Fortigate.
|
|||
enable_log
boolean
|
|
Enable/Disable logging for task.
|
||
firewall_shaping_policy
dictionary
|
Configure shaping policies.
|
|||
app_category
list / elements=string
|
IDs of one or more application categories that this shaper applies application control traffic shaping to.
|
|||
id
integer / required
|
Category IDs.
|
|||
app_group
list / elements=string
|
One or more application group names.
|
|||
name
string / required
|
Application group name. Source application.group.name.
|
|||
application
list / elements=string
|
IDs of one or more applications that this shaper applies application control traffic shaping to.
|
|||
id
integer / required
|
Application IDs.
|
|||
class_id
integer
|
Traffic class ID. Source firewall.traffic-class.class-id.
|
|||
comment
string
|
Comments.
|
|||
diffserv_forward
string
|
|
Enable to change packet"s DiffServ values to the specified diffservcode-forward value.
|
||
diffserv_reverse
string
|
|
Enable to change packet"s reverse (reply) DiffServ values to the specified diffservcode-rev value.
|
||
diffservcode_forward
string
|
Change packet"s DiffServ to this value.
|
|||
diffservcode_rev
string
|
Change packet"s reverse (reply) DiffServ to this value.
|
|||
dstaddr
list / elements=string
|
IPv4 destination address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address.name firewall.addrgrp.name.
|
|||
dstaddr6
list / elements=string
|
IPv6 destination address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address6.name firewall.addrgrp6.name.
|
|||
dstintf
list / elements=string
|
One or more outgoing (egress) interfaces.
|
|||
name
string / required
|
Interface name. Source system.interface.name system.zone.name.
|
|||
groups
list / elements=string
|
Apply this traffic shaping policy to user groups that have authenticated with the FortiGate.
|
|||
name
string / required
|
Group name. Source user.group.name.
|
|||
id
integer / required
|
Shaping policy ID.
|
|||
internet_service
string
|
|
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.
|
||
internet_service_custom
list / elements=string
|
Custom Internet Service name.
|
|||
name
string / required
|
Custom Internet Service name. Source firewall.internet-service-custom.name.
|
|||
internet_service_custom_group
list / elements=string
|
Custom Internet Service group name.
|
|||
name
string / required
|
Custom Internet Service group name. Source firewall.internet-service-custom-group.name.
|
|||
internet_service_group
list / elements=string
|
Internet Service group name.
|
|||
name
string / required
|
Internet Service group name. Source firewall.internet-service-group.name.
|
|||
internet_service_id
list / elements=string
|
Internet Service ID.
|
|||
id
integer / required
|
Internet Service ID. Source firewall.internet-service.id.
|
|||
internet_service_name
list / elements=string
|
Internet Service ID.
|
|||
name
string / required
|
Internet Service name. Source firewall.internet-service-name.name.
|
|||
internet_service_src
string
|
|
Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.
|
||
internet_service_src_custom
list / elements=string
|
Custom Internet Service source name.
|
|||
name
string / required
|
Custom Internet Service name. Source firewall.internet-service-custom.name.
|
|||
internet_service_src_custom_group
list / elements=string
|
Custom Internet Service source group name.
|
|||
name
string / required
|
Custom Internet Service group name. Source firewall.internet-service-custom-group.name.
|
|||
internet_service_src_group
list / elements=string
|
Internet Service source group name.
|
|||
name
string / required
|
Internet Service group name. Source firewall.internet-service-group.name.
|
|||
internet_service_src_id
list / elements=string
|
Internet Service source ID.
|
|||
id
integer / required
|
Internet Service ID. Source firewall.internet-service.id.
|
|||
internet_service_src_name
list / elements=string
|
Internet Service source name.
|
|||
name
string / required
|
Internet Service name. Source firewall.internet-service-name.name.
|
|||
ip_version
string
|
|
Apply this traffic shaping policy to IPv4 or IPv6 traffic.
|
||
name
string
|
Shaping policy name.
|
|||
per_ip_shaper
string
|
Per-IP traffic shaper to apply with this policy. Source firewall.shaper.per-ip-shaper.name.
|
|||
schedule
string
|
Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
|
|||
service
list / elements=string
|
Service and service group names.
|
|||
name
string / required
|
Service name. Source firewall.service.custom.name firewall.service.group.name.
|
|||
srcaddr
list / elements=string
|
IPv4 source address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address.name firewall.addrgrp.name.
|
|||
srcaddr6
list / elements=string
|
IPv6 source address and address group names.
|
|||
name
string / required
|
Address name. Source firewall.address6.name firewall.addrgrp6.name.
|
|||
srcintf
list / elements=string
|
One or more incoming (ingress) interfaces.
|
|||
name
string / required
|
Interface name. Source system.interface.name system.zone.name.
|
|||
status
string
|
|
Enable/disable this traffic shaping policy.
|
||
tos
string
|
ToS (Type of Service) value used for comparison.
|
|||
tos_mask
string
|
Non-zero bit positions are used for comparison while zero bit positions are ignored.
|
|||
tos_negate
string
|
|
Enable negated TOS match.
|
||
traffic_shaper
string
|
Traffic shaper to apply to traffic forwarded by the firewall policy. Source firewall.shaper.traffic-shaper.name.
|
|||
traffic_shaper_reverse
string
|
Traffic shaper to apply to response traffic received by the firewall policy. Source firewall.shaper.traffic-shaper.name.
|
|||
url_category
list / elements=string
|
IDs of one or more FortiGuard Web Filtering categories that this shaper applies traffic shaping to.
|
|||
id
integer / required
|
URL category ID.
|
|||
users
list / elements=string
|
Apply this traffic shaping policy to individual users that have authenticated with the FortiGate.
|
|||
name
string / required
|
User name. Source user.local.name.
|
|||
state
string / required
|
|
Indicates whether to create or remove the object.
|
||
vdom
string
|
Default:
"root"
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
|
Notes
Note
- Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure shaping policies.
fortios_firewall_shaping_policy:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_shaping_policy:
app_category:
-
id: "4"
app_group:
-
name: "default_name_6 (source application.group.name)"
application:
-
id: "8"
class_id: "9 (source firewall.traffic-class.class-id)"
comment: "Comments."
diffserv_forward: "enable"
diffserv_reverse: "enable"
diffservcode_forward: "<your_own_value>"
diffservcode_rev: "<your_own_value>"
dstaddr:
-
name: "default_name_16 (source firewall.address.name firewall.addrgrp.name)"
dstaddr6:
-
name: "default_name_18 (source firewall.address6.name firewall.addrgrp6.name)"
dstintf:
-
name: "default_name_20 (source system.interface.name system.zone.name)"
groups:
-
name: "default_name_22 (source user.group.name)"
id: "23"
internet_service: "enable"
internet_service_custom:
-
name: "default_name_26 (source firewall.internet-service-custom.name)"
internet_service_custom_group:
-
name: "default_name_28 (source firewall.internet-service-custom-group.name)"
internet_service_group:
-
name: "default_name_30 (source firewall.internet-service-group.name)"
internet_service_id:
-
id: "32 (source firewall.internet-service.id)"
internet_service_name:
-
name: "default_name_34 (source firewall.internet-service-name.name)"
internet_service_src: "enable"
internet_service_src_custom:
-
name: "default_name_37 (source firewall.internet-service-custom.name)"
internet_service_src_custom_group:
-
name: "default_name_39 (source firewall.internet-service-custom-group.name)"
internet_service_src_group:
-
name: "default_name_41 (source firewall.internet-service-group.name)"
internet_service_src_id:
-
id: "43 (source firewall.internet-service.id)"
internet_service_src_name:
-
name: "default_name_45 (source firewall.internet-service-name.name)"
ip_version: "4"
name: "default_name_47"
per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
service:
-
name: "default_name_51 (source firewall.service.custom.name firewall.service.group.name)"
srcaddr:
-
name: "default_name_53 (source firewall.address.name firewall.addrgrp.name)"
srcaddr6:
-
name: "default_name_55 (source firewall.address6.name firewall.addrgrp6.name)"
srcintf:
-
name: "default_name_57 (source system.interface.name system.zone.name)"
status: "enable"
tos: "<your_own_value>"
tos_mask: "<your_own_value>"
tos_negate: "enable"
traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
url_category:
-
id: "65"
users:
-
name: "default_name_67 (source user.local.name)"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
build
string
|
always |
Build number of the fortigate image
Sample:
1547
|
http_method
string
|
always |
Last method used to provision the content into FortiGate
Sample:
PUT
|
http_status
string
|
always |
Last result given by FortiGate on last operation applied
Sample:
200
|
mkey
string
|
success |
Master key (id) used in the last call to FortiGate
Sample:
id
|
name
string
|
always |
Name of the table used to fulfill the request
Sample:
urlfilter
|
path
string
|
always |
Path of the table used to fulfill the request
Sample:
webfilter
|
revision
string
|
always |
Internal revision number
Sample:
17.0.2.10658
|
serial
string
|
always |
Serial number of the unit
Sample:
FGVMEVYYQT3AB5352
|
status
string
|
always |
Indication of the operation's result
Sample:
success
|
vdom
string
|
always |
Virtual domain used
Sample:
root
|
version
string
|
always |
Version of the FortiGate
Sample:
v5.6.3
|
Authors
- Link Zheng (@chillancezen)
- Jie Xue (@JieX19)
- Hongbin Lu (@fgtdev-hblu)
- Frank Shen (@frankshen01)
- Miguel Angel Munoz (@mamunozgonzalez)
- Nicolas Thomas (@thomnico)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_shaping_policy_module.html