fortinet.fortios.fortios_firewall_vip – Configure virtual IP for IPv4 in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_vip.

New in version 2.10: of fortinet.fortios

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and vip category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter			Choices/Defaults	Comments
access_token string				Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean			Choices: no ← yes	Enable/Disable logging for task.
firewall_vip dictionary				Configure virtual IP for IPv4.
	arp_reply string		Choices: disable enable	Enable to respond to ARP requests for this virtual IP address. Enabled by default.
	color integer			Color of icon on the GUI.
	comment string			Comment.
	dns_mapping_ttl integer			DNS mapping TTL (Set to zero to use TTL in DNS response).
	extaddr list / elements=string			External FQDN address name.
		name string / required		Address name. Source firewall.address.name firewall.addrgrp.name.
	extintf string			Interface connected to the source network that receives the packets that will be forwarded to the destination network. Source system .interface.name.
	extip string			IP address or address range on the external interface that you want to map to an address or address range on the destination network.
	extport string			Incoming port number range that you want to map to a port number range on the destination network.
	gratuitous_arp_interval integer			Enable to have the VIP send gratuitous ARPs. 0=disabled. Set from 5 up to 8640000 seconds to enable.
	http_cookie_age integer			Time in minutes that client web browsers should keep a cookie. Default is 60 seconds. 0 = no time limit.
	http_cookie_domain string			Domain that HTTP cookie persistence should apply to.
	http_cookie_domain_from_host string		Choices: disable enable	Enable/disable use of HTTP cookie domain from host field in HTTP.
	http_cookie_generation integer			Generation of HTTP cookie to be accepted. Changing invalidates all existing cookies.
	http_cookie_path string			Limit HTTP cookie persistence to the specified path.
	http_cookie_share string		Choices: disable same-ip	Control sharing of cookies across virtual servers. same-ip means a cookie from one virtual server can be used by another. Disable stops cookie sharing.
	http_ip_header string		Choices: enable disable	For HTTP multiplexing, enable to add the original client IP address in the XForwarded-For HTTP header.
	http_ip_header_name string			For HTTP multiplexing, enter a custom HTTPS header name. The original client IP address is added to this header. If empty, X-Forwarded-For is used.
	http_multiplex string		Choices: enable disable	Enable/disable HTTP multiplexing.
	http_redirect string		Choices: enable disable	Enable/disable redirection of HTTP to HTTPS
	https_cookie_secure string		Choices: disable enable	Enable/disable verification that inserted HTTPS cookies are secure.
	id integer			Custom defined ID.
	ldb_method string		Choices: static round-robin weighted least-session least-rtt first-alive http-host	Method used to distribute sessions to real servers.
	mapped_addr string			Mapped FQDN address name. Source firewall.address.name.
	mappedip list / elements=string			IP address or address range on the destination network to which the external IP address is mapped.
		range string / required		Mapped IP range.
	mappedport string			Port number range on the destination network to which the external port number range is mapped.
	max_embryonic_connections integer			Maximum number of incomplete connections.
	monitor list / elements=string			Name of the health check monitor to use when polling to determine a virtual server"s connectivity status.
		name string / required		Health monitor name. Source firewall.ldb-monitor.name.
	name string / required			Virtual IP name.
	nat_source_vip string		Choices: disable enable	Enable/disable forcing the source NAT mapped IP to the external IP for all traffic.
	outlook_web_access string		Choices: disable enable	Enable to add the Front-End-Https header for Microsoft Outlook Web Access.
	persistence string		Choices: none http-cookie ssl-session-id	Configure how to make sure that clients connect to the same server every time they make a request that is part of the same session.
	portforward string		Choices: disable enable	Enable/disable port forwarding.
	portmapping_type string		Choices: 1-to-1 m-to-n	Port mapping type.
	protocol string		Choices: tcp udp sctp icmp	Protocol to use when forwarding packets.
	realservers list / elements=string			Select the real servers that this server load balancing VIP will distribute traffic to.
		address string		Dynamic address of the real server. Source firewall.address.name.
		client_ip string		Only clients in this IP range can connect to this real server.
		healthcheck string	Choices: disable enable vip	Enable to check the responsiveness of the real server before forwarding traffic.
		holddown_interval integer		Time in seconds that the health check monitor continues to monitor and unresponsive server that should be active.
		http_host string		HTTP server domain name in HTTP header.
		id integer / required		Real server ID.
		ip string		IP address of the real server.
		max_connections integer		Max number of active connections that can be directed to the real server. When reached, sessions are sent to other real servers.
		monitor string		Name of the health check monitor to use when polling to determine a virtual server"s connectivity status. Source firewall .ldb-monitor.name.
		port integer		Port for communicating with the real server. Required if port forwarding is enabled.
		status string	Choices: active standby disable	Set the status of the real server to active so that it can accept traffic, or on standby or disabled so no traffic is sent.
		type string	Choices: ip address	Type of address.
		weight integer		Weight of the real server. If weighted load balancing is enabled, the server with the highest weight gets more connections.
	server_type string		Choices: http https imaps pop3s smtps ssl tcp udp ip ssh	Protocol to be load balanced by the virtual server (also called the server load balance virtual IP).
	service list / elements=string			Service name.
		name string / required		Service name. Source firewall.service.custom.name firewall.service.group.name.
	src_filter list / elements=string			Source address filter. Each address must be either an IP/subnet (x.x.x.x/n) or a range (x.x.x.x-y.y.y.y). Separate addresses with spaces.
		range string / required		Source-filter range.
	srcintf_filter list / elements=string			Interfaces to which the VIP applies. Separate the names with spaces.
		interface_name string		Interface name. Source system.interface.name.
	ssl_algorithm string		Choices: high medium low custom	Permitted encryption algorithms for SSL sessions according to encryption strength.
	ssl_certificate string			The name of the SSL certificate to use for SSL acceleration. Source vpn.certificate.local.name.
	ssl_cipher_suites list / elements=string			SSL/TLS cipher suites acceptable from a client, ordered by priority.
		cipher string	Choices: TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-AES-128-CBC-SHA TLS-DHE-RSA-WITH-AES-256-CBC-SHA TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 TLS-DHE-DSS-WITH-AES-128-CBC-SHA TLS-DHE-DSS-WITH-AES-256-CBC-SHA TLS-DHE-DSS-WITH-AES-128-CBC-SHA256 TLS-DHE-DSS-WITH-AES-128-GCM-SHA256 TLS-DHE-DSS-WITH-AES-256-CBC-SHA256 TLS-DHE-DSS-WITH-AES-256-GCM-SHA384 TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-AES-128-CBC-SHA TLS-RSA-WITH-AES-256-CBC-SHA TLS-RSA-WITH-AES-128-CBC-SHA256 TLS-RSA-WITH-AES-128-GCM-SHA256 TLS-RSA-WITH-AES-256-CBC-SHA256 TLS-RSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-SEED-CBC-SHA TLS-DHE-DSS-WITH-SEED-CBC-SHA TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-DHE-DSS-WITH-ARIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-ARIA-256-CBC-SHA384 TLS-RSA-WITH-SEED-CBC-SHA TLS-RSA-WITH-ARIA-128-CBC-SHA256 TLS-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-RC4-128-SHA TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-DSS-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-RC4-128-MD5 TLS-RSA-WITH-RC4-128-SHA TLS-DHE-RSA-WITH-DES-CBC-SHA TLS-DHE-DSS-WITH-DES-CBC-SHA TLS-RSA-WITH-DES-CBC-SHA TLS-AES-128-GCM-SHA256 TLS-AES-256-GCM-SHA384 TLS-CHACHA20-POLY1305-SHA256	Cipher suite name.
		priority integer / required		SSL/TLS cipher suites priority.
		versions string	Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3	SSL/TLS versions that the cipher suite can be used with.
	ssl_client_fallback string		Choices: disable enable	Enable/disable support for preventing Downgrade Attacks on client connections (RFC 7507).
	ssl_client_rekey_count integer			Maximum length of data in MB before triggering a client rekey (0 = disable).
	ssl_client_renegotiation string		Choices: allow deny secure	Allow, deny, or require secure renegotiation of client sessions to comply with RFC 5746.
	ssl_client_session_state_max integer			Maximum number of client to FortiGate SSL session states to keep.
	ssl_client_session_state_timeout integer			Number of minutes to keep client to FortiGate SSL session state.
	ssl_client_session_state_type string		Choices: disable time count both	How to expire SSL sessions for the segment of the SSL connection between the client and the FortiGate.
	ssl_dh_bits string		Choices: 768 1024 1536 2048 3072 4096	Number of bits to use in the Diffie-Hellman exchange for RSA encryption of SSL sessions.
	ssl_hpkp string		Choices: disable enable report-only	Enable/disable including HPKP header in response.
	ssl_hpkp_age integer			Number of seconds the client should honour the HPKP setting.
	ssl_hpkp_backup string			Certificate to generate backup HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.
	ssl_hpkp_include_subdomains string		Choices: disable enable	Indicate that HPKP header applies to all subdomains.
	ssl_hpkp_primary string			Certificate to generate primary HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name.
	ssl_hpkp_report_uri string			URL to report HPKP violations to.
	ssl_hsts string		Choices: disable enable	Enable/disable including HSTS header in response.
	ssl_hsts_age integer			Number of seconds the client should honour the HSTS setting.
	ssl_hsts_include_subdomains string		Choices: disable enable	Indicate that HSTS header applies to all subdomains.
	ssl_http_location_conversion string		Choices: enable disable	Enable to replace HTTP with HTTPS in the reply"s Location HTTP header field.
	ssl_http_match_host string		Choices: enable disable	Enable/disable HTTP host matching for location conversion.
	ssl_max_version string		Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3	Highest SSL/TLS version acceptable from a client.
	ssl_min_version string		Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3	Lowest SSL/TLS version acceptable from a client.
	ssl_mode string		Choices: half full	Apply SSL offloading between the client and the FortiGate (half) or from the client to the FortiGate and from the FortiGate to the server (full).
	ssl_pfs string		Choices: require deny allow	Select the cipher suites that can be used for SSL perfect forward secrecy (PFS). Applies to both client and server sessions.
	ssl_send_empty_frags string		Choices: enable disable	Enable/disable sending empty fragments to avoid CBC IV attacks (SSL 3.0 & TLS 1.0 only). May need to be disabled for compatibility with older systems.
	ssl_server_algorithm string		Choices: high medium low custom client	Permitted encryption algorithms for the server side of SSL full mode sessions according to encryption strength.
	ssl_server_cipher_suites list / elements=string			SSL/TLS cipher suites to offer to a server, ordered by priority.
		cipher string	Choices: TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 TLS-DHE-RSA-WITH-AES-128-CBC-SHA TLS-DHE-RSA-WITH-AES-256-CBC-SHA TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 TLS-DHE-DSS-WITH-AES-128-CBC-SHA TLS-DHE-DSS-WITH-AES-256-CBC-SHA TLS-DHE-DSS-WITH-AES-128-CBC-SHA256 TLS-DHE-DSS-WITH-AES-128-GCM-SHA256 TLS-DHE-DSS-WITH-AES-256-CBC-SHA256 TLS-DHE-DSS-WITH-AES-256-GCM-SHA384 TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-AES-128-CBC-SHA TLS-RSA-WITH-AES-256-CBC-SHA TLS-RSA-WITH-AES-128-CBC-SHA256 TLS-RSA-WITH-AES-128-GCM-SHA256 TLS-RSA-WITH-AES-256-CBC-SHA256 TLS-RSA-WITH-AES-256-GCM-SHA384 TLS-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-DSS-WITH-CAMELLIA-256-CBC-SHA256 TLS-DHE-RSA-WITH-SEED-CBC-SHA TLS-DHE-DSS-WITH-SEED-CBC-SHA TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-DHE-DSS-WITH-ARIA-128-CBC-SHA256 TLS-DHE-DSS-WITH-ARIA-256-CBC-SHA384 TLS-RSA-WITH-SEED-CBC-SHA TLS-RSA-WITH-ARIA-128-CBC-SHA256 TLS-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 TLS-ECDHE-RSA-WITH-RC4-128-SHA TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA TLS-DHE-DSS-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-3DES-EDE-CBC-SHA TLS-RSA-WITH-RC4-128-MD5 TLS-RSA-WITH-RC4-128-SHA TLS-DHE-RSA-WITH-DES-CBC-SHA TLS-DHE-DSS-WITH-DES-CBC-SHA TLS-RSA-WITH-DES-CBC-SHA TLS-AES-128-GCM-SHA256 TLS-AES-256-GCM-SHA384 TLS-CHACHA20-POLY1305-SHA256	Cipher suite name.
		priority integer / required		SSL/TLS cipher suites priority.
		versions string	Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 tls-1.3	SSL/TLS versions that the cipher suite can be used with.
	ssl_server_max_version string		Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 client tls-1.3	Highest SSL/TLS version acceptable from a server. Use the client setting by default.
	ssl_server_min_version string		Choices: ssl-3.0 tls-1.0 tls-1.1 tls-1.2 client tls-1.3	Lowest SSL/TLS version acceptable from a server. Use the client setting by default.
	ssl_server_session_state_max integer			Maximum number of FortiGate to Server SSL session states to keep.
	ssl_server_session_state_timeout integer			Number of minutes to keep FortiGate to Server SSL session state.
	ssl_server_session_state_type string		Choices: disable time count both	How to expire SSL sessions for the segment of the SSL connection between the server and the FortiGate.
	status string		Choices: disable enable	Enable/disable VIP.
	type string		Choices: static-nat load-balance server-load-balance dns-translation fqdn access-proxy	Configure a static NAT, load balance, server load balance, DNS translation, or FQDN VIP.
	uuid string			Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
	weblogic_server string		Choices: disable enable	Enable to add an HTTP header to indicate SSL offloading for a WebLogic server.
	websphere_server string		Choices: disable enable	Enable to add an HTTP header to indicate SSL offloading for a WebSphere server.
state string / required			Choices: present absent	Indicates whether to create or remove the object.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure virtual IP for IPv4.
    fortios_firewall_vip:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_vip:
        arp_reply: "disable"
        color: "4"
        comment: "Comment."
        dns_mapping_ttl: "6"
        extaddr:
         -
            name: "default_name_8 (source firewall.address.name firewall.addrgrp.name)"
        extintf: "<your_own_value> (source system.interface.name)"
        extip: "<your_own_value>"
        extport: "<your_own_value>"
        gratuitous_arp_interval: "12"
        http_cookie_age: "13"
        http_cookie_domain: "<your_own_value>"
        http_cookie_domain_from_host: "disable"
        http_cookie_generation: "16"
        http_cookie_path: "<your_own_value>"
        http_cookie_share: "disable"
        http_ip_header: "enable"
        http_ip_header_name: "<your_own_value>"
        http_multiplex: "enable"
        http_redirect: "enable"
        https_cookie_secure: "disable"
        id:  "24"
        ldb_method: "static"
        mapped_addr: "<your_own_value> (source firewall.address.name)"
        mappedip:
         -
            range: "<your_own_value>"
        mappedport: "<your_own_value>"
        max_embryonic_connections: "30"
        monitor:
         -
            name: "default_name_32 (source firewall.ldb-monitor.name)"
        name: "default_name_33"
        nat_source_vip: "disable"
        outlook_web_access: "disable"
        persistence: "none"
        portforward: "disable"
        portmapping_type: "1-to-1"
        protocol: "tcp"
        realservers:
         -
            address: "<your_own_value> (source firewall.address.name)"
            client_ip: "<your_own_value>"
            healthcheck: "disable"
            holddown_interval: "44"
            http_host: "myhostname"
            id:  "46"
            ip: "<your_own_value>"
            max_connections: "48"
            monitor: "<your_own_value> (source firewall.ldb-monitor.name)"
            port: "50"
            status: "active"
            type: "ip"
            weight: "53"
        server_type: "http"
        service:
         -
            name: "default_name_56 (source firewall.service.custom.name firewall.service.group.name)"
        src_filter:
         -
            range: "<your_own_value>"
        srcintf_filter:
         -
            interface_name: "<your_own_value> (source system.interface.name)"
        ssl_algorithm: "high"
        ssl_certificate: "<your_own_value> (source vpn.certificate.local.name)"
        ssl_cipher_suites:
         -
            cipher: "TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256"
            priority: "65"
            versions: "ssl-3.0"
        ssl_client_fallback: "disable"
        ssl_client_rekey_count: "68"
        ssl_client_renegotiation: "allow"
        ssl_client_session_state_max: "70"
        ssl_client_session_state_timeout: "71"
        ssl_client_session_state_type: "disable"
        ssl_dh_bits: "768"
        ssl_hpkp: "disable"
        ssl_hpkp_age: "75"
        ssl_hpkp_backup: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl_hpkp_include_subdomains: "disable"
        ssl_hpkp_primary: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)"
        ssl_hpkp_report_uri: "<your_own_value>"
        ssl_hsts: "disable"
        ssl_hsts_age: "81"
        ssl_hsts_include_subdomains: "disable"
        ssl_http_location_conversion: "enable"
        ssl_http_match_host: "enable"
        ssl_max_version: "ssl-3.0"
        ssl_min_version: "ssl-3.0"
        ssl_mode: "half"
        ssl_pfs: "require"
        ssl_send_empty_frags: "enable"
        ssl_server_algorithm: "high"
        ssl_server_cipher_suites:
         -
            cipher: "TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256"
            priority: "93"
            versions: "ssl-3.0"
        ssl_server_max_version: "ssl-3.0"
        ssl_server_min_version: "ssl-3.0"
        ssl_server_session_state_max: "97"
        ssl_server_session_state_timeout: "98"
        ssl_server_session_state_type: "disable"
        status: "disable"
        type: "static-nat"
        uuid: "<your_own_value>"
        weblogic_server: "disable"
        websphere_server: "disable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_firewall_vip_module.html

Docs

Docs4dev

Title here