fortinet.fortios.fortios_router_ospf – Configure OSPF in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_ospf.

New in version 2.10: of fortinet.fortios

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and ospf category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter					Choices/Defaults	Comments
access_token string						Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean					Choices: no ← yes	Enable/Disable logging for task.
router_ospf dictionary						Configure OSPF.
	abr_type string				Choices: cisco ibm shortcut standard	Area border router type.
	area list / elements=string					OSPF area configuration.
		authentication string			Choices: none text md5	Authentication type.
		comments string				Comment.
		default_cost integer				Summary default cost of stub or NSSA area.
		filter_list list / elements=string				OSPF area filter-list configuration.
			direction string		Choices: in out	Direction.
			id integer / required			Filter list entry ID.
			list string			Access-list or prefix-list name. Source router.access-list.name router.prefix-list.name.
		id string / required				Area entry IP address.
		nssa_default_information_originate string			Choices: enable always disable	Redistribute, advertise, or do not originate Type-7 default route into NSSA area.
		nssa_default_information_originate_metric integer				OSPF default metric.
		nssa_default_information_originate_metric_type string			Choices: 1 2	OSPF metric type for default routes.
		nssa_redistribution string			Choices: enable disable	Enable/disable redistribute into NSSA area.
		nssa_translator_role string			Choices: candidate never always	NSSA translator role type.
		range list / elements=string				OSPF area range configuration.
			advertise string		Choices: disable enable	Enable/disable advertise status.
			id integer / required			Range entry ID.
			prefix string			Prefix.
			substitute string			Substitute prefix.
			substitute_status string		Choices: enable disable	Enable/disable substitute status.
		shortcut string			Choices: disable enable default	Enable/disable shortcut option.
		stub_type string			Choices: no-summary summary	Stub summary setting.
		type string			Choices: regular nssa stub	Area type setting.
		virtual_link list / elements=string				OSPF virtual link configuration.
			authentication string		Choices: none text md5	Authentication type.
			authentication_key string			Authentication key.
			dead_interval integer			Dead interval.
			hello_interval integer			Hello interval.
			md5_key string			MD5 key.
			md5_keychain string			Authentication MD5 key-chain name. Source router.key-chain.name.
			md5_keys list / elements=string			MD5 key.
				id integer / required		Key ID (1 - 255).
				key_string string		Password for the key.
			name string / required			Virtual link entry name.
			peer string			Peer IP.
			retransmit_interval integer			Retransmit interval.
			transmit_delay integer			Transmit delay.
	auto_cost_ref_bandwidth integer					Reference bandwidth in terms of megabits per second.
	bfd string				Choices: enable disable	Bidirectional Forwarding Detection (BFD).
	database_overflow string				Choices: enable disable	Enable/disable database overflow.
	database_overflow_max_lsas integer					Database overflow maximum LSAs.
	database_overflow_time_to_recover integer					Database overflow time to recover (sec).
	default_information_metric integer					Default information metric.
	default_information_metric_type string				Choices: 1 2	Default information metric type.
	default_information_originate string				Choices: enable always disable	Enable/disable generation of default route.
	default_information_route_map string					Default information route map. Source router.route-map.name.
	default_metric integer					Default metric of redistribute routes.
	distance integer					Distance of the route.
	distance_external integer					Administrative external distance.
	distance_inter_area integer					Administrative inter-area distance.
	distance_intra_area integer					Administrative intra-area distance.
	distribute_list list / elements=string					Distribute list configuration.
		access_list string				Access list name. Source router.access-list.name.
		id integer / required				Distribute list entry ID.
		protocol string			Choices: connected static rip	Protocol type.
	distribute_list_in string					Filter incoming routes. Source router.access-list.name router.prefix-list.name.
	distribute_route_map_in string					Filter incoming external routes by route-map. Source router.route-map.name.
	log_neighbour_changes string				Choices: enable disable	Enable logging of OSPF neighbour"s changes
	neighbor list / elements=string					OSPF neighbor configuration are used when OSPF runs on non-broadcast media
		cost integer				Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
		id integer / required				Neighbor entry ID.
		ip string				Interface IP address of the neighbor.
		poll_interval integer				Poll interval time in seconds.
		priority integer				Priority.
	network list / elements=string					OSPF network configuration.
		area string				Attach the network to area.
		comments string				Comment.
		id integer / required				Network entry ID.
		prefix string				Prefix.
	ospf_interface list / elements=string					OSPF interface configuration.
		authentication string			Choices: none text md5	Authentication type.
		authentication_key string				Authentication key.
		bfd string			Choices: global enable disable	Bidirectional Forwarding Detection (BFD).
		comments string				Comment.
		cost integer				Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
		database_filter_out string			Choices: enable disable	Enable/disable control of flooding out LSAs.
		dead_interval integer				Dead interval.
		hello_interval integer				Hello interval.
		hello_multiplier integer				Number of hello packets within dead interval.
		interface string				Configuration interface name. Source system.interface.name.
		ip string				IP address.
		md5_key string				MD5 key.
		md5_keychain string				Authentication MD5 key-chain name. Source router.key-chain.name.
		md5_keys list / elements=string				MD5 key.
			id integer / required			Key ID (1 - 255).
			key_string string			Password for the key.
		mtu integer				MTU for database description packets.
		mtu_ignore string			Choices: enable disable	Enable/disable ignore MTU.
		name string / required				Interface entry name.
		network_type string			Choices: broadcast non-broadcast point-to-point point-to-multipoint point-to-multipoint-non-broadcast	Network type.
		prefix_length integer				Prefix length.
		priority integer				Priority.
		resync_timeout integer				Graceful restart neighbor resynchronization timeout.
		retransmit_interval integer				Retransmit interval.
		status string			Choices: disable enable	Enable/disable status.
		transmit_delay integer				Transmit delay.
	passive_interface list / elements=string					Passive interface configuration.
		name string / required				Passive interface name. Source system.interface.name.
	redistribute list / elements=string					Redistribute configuration.
		metric integer				Redistribute metric setting.
		metric_type string			Choices: 1 2	Metric type.
		name string / required				Redistribute name.
		routemap string				Route map name. Source router.route-map.name.
		status string			Choices: enable disable	status
		tag integer				Tag value.
	restart_mode string				Choices: none lls graceful-restart	OSPF restart mode (graceful or LLS).
	restart_period integer					Graceful restart period.
	rfc1583_compatible string				Choices: enable disable	Enable/disable RFC1583 compatibility.
	router_id string					Router ID.
	spf_timers string					SPF calculation frequency.
	summary_address list / elements=string					IP address summary configuration.
		advertise string			Choices: disable enable	Enable/disable advertise status.
		id integer / required				Summary address entry ID.
		prefix string				Prefix.
		tag integer				Tag value.
vdom string					Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure OSPF.
    fortios_router_ospf:
      vdom:  "{{ vdom }}"
      router_ospf:
        abr_type: "cisco"
        area:
         -
            authentication: "none"
            comments: "<your_own_value>"
            default_cost: "7"
            filter_list:
             -
                direction: "in"
                id:  "10"
                list: "<your_own_value> (source router.access-list.name router.prefix-list.name)"
            id:  "12"
            nssa_default_information_originate: "enable"
            nssa_default_information_originate_metric: "14"
            nssa_default_information_originate_metric_type: "1"
            nssa_redistribution: "enable"
            nssa_translator_role: "candidate"
            range:
             -
                advertise: "disable"
                id:  "20"
                prefix: "<your_own_value>"
                substitute: "<your_own_value>"
                substitute_status: "enable"
            shortcut: "disable"
            stub_type: "no-summary"
            type: "regular"
            virtual_link:
             -
                authentication: "none"
                authentication_key: "<your_own_value>"
                dead_interval: "30"
                hello_interval: "31"
                md5_key: "<your_own_value>"
                md5_keychain: "<your_own_value> (source router.key-chain.name)"
                md5_keys:
                 -
                    id:  "35"
                    key_string: "<your_own_value>"
                name: "default_name_37"
                peer: "<your_own_value>"
                retransmit_interval: "39"
                transmit_delay: "40"
        auto_cost_ref_bandwidth: "41"
        bfd: "enable"
        database_overflow: "enable"
        database_overflow_max_lsas: "44"
        database_overflow_time_to_recover: "45"
        default_information_metric: "46"
        default_information_metric_type: "1"
        default_information_originate: "enable"
        default_information_route_map: "<your_own_value> (source router.route-map.name)"
        default_metric: "50"
        distance: "51"
        distance_external: "52"
        distance_inter_area: "53"
        distance_intra_area: "54"
        distribute_list:
         -
            access_list: "<your_own_value> (source router.access-list.name)"
            id:  "57"
            protocol: "connected"
        distribute_list_in: "<your_own_value> (source router.access-list.name router.prefix-list.name)"
        distribute_route_map_in: "<your_own_value> (source router.route-map.name)"
        log_neighbour_changes: "enable"
        neighbor:
         -
            cost: "63"
            id:  "64"
            ip: "<your_own_value>"
            poll_interval: "66"
            priority: "67"
        network:
         -
            area: "<your_own_value>"
            comments: "<your_own_value>"
            id:  "71"
            prefix: "<your_own_value>"
        ospf_interface:
         -
            authentication: "none"
            authentication_key: "<your_own_value>"
            bfd: "global"
            comments: "<your_own_value>"
            cost: "78"
            database_filter_out: "enable"
            dead_interval: "80"
            hello_interval: "81"
            hello_multiplier: "82"
            interface: "<your_own_value> (source system.interface.name)"
            ip: "<your_own_value>"
            md5_key: "<your_own_value>"
            md5_keychain: "<your_own_value> (source router.key-chain.name)"
            md5_keys:
             -
                id:  "88"
                key_string: "<your_own_value>"
            mtu: "90"
            mtu_ignore: "enable"
            name: "default_name_92"
            network_type: "broadcast"
            prefix_length: "94"
            priority: "95"
            resync_timeout: "96"
            retransmit_interval: "97"
            status: "disable"
            transmit_delay: "99"
        passive_interface:
         -
            name: "default_name_101 (source system.interface.name)"
        redistribute:
         -
            metric: "103"
            metric_type: "1"
            name: "default_name_105"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
            tag: "108"
        restart_mode: "none"
        restart_period: "110"
        rfc1583_compatible: "enable"
        router_id: "<your_own_value>"
        spf_timers: "<your_own_value>"
        summary_address:
         -
            advertise: "disable"
            id:  "116"
            prefix: "<your_own_value>"
            tag: "118"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_router_ospf_module.html

Docs

Docs4dev

Title here