fortinet.fortios.fortios_system_snmp_user – SNMP user configuration in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_system_snmp_user.

New in version 2.10: of fortinet.fortios

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system_snmp feature and user category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter		Choices/Defaults	Comments
access_token string			Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean		Choices: no ← yes	Enable/Disable logging for task.
state string / required		Choices: present absent	Indicates whether to create or remove the object.
system_snmp_user dictionary			SNMP user configuration.
	auth_proto string	Choices: md5 sha sha224 sha256 sha384 sha512	Authentication protocol.
	auth_pwd string		Password for authentication protocol.
	events list / elements=string	Choices: cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change fm-conf-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open temperature-high voltage-alert power-supply-failure faz-disconnect fan-failure wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down device-new per-cpu-high dhcp ospf-nbr-state-change ospf-virtnbr-state-change	SNMP notifications (traps) to send.
	ha_direct string	Choices: enable disable	Enable/disable direct management of HA cluster members.
	name string / required		SNMP user name.
	notify_hosts list / elements=string		SNMP managers to send notifications (traps) to.
	notify_hosts6 list / elements=string		IPv6 SNMP managers to send notifications (traps) to.
	priv_proto string	Choices: aes des aes256 aes256cisco	Privacy (encryption) protocol.
	priv_pwd string		Password for privacy (encryption) protocol.
	queries string	Choices: enable disable	Enable/disable SNMP queries for this user.
	query_port integer		SNMPv3 query port .
	security_level string	Choices: no-auth-no-priv auth-no-priv auth-priv	Security level for message authentication and encryption.
	source_ip string		Source IP for SNMP trap.
	source_ipv6 string		Source IPv6 for SNMP trap.
	status string	Choices: enable disable	Enable/disable this SNMP user.
	trap_lport integer		SNMPv3 local trap port .
	trap_rport integer		SNMPv3 trap remote port .
	trap_status string	Choices: enable disable	Enable/disable traps for this SNMP user.
vdom string		Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: SNMP user configuration.
    fortios_system_snmp_user:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      system_snmp_user:
        auth_proto: "md5"
        auth_pwd: "<your_own_value>"
        events: "cpu-high"
        ha_direct: "enable"
        name: "default_name_7"
        notify_hosts: "<your_own_value>"
        notify_hosts6: "<your_own_value>"
        priv_proto: "aes"
        priv_pwd: "<your_own_value>"
        queries: "enable"
        query_port: "13"
        security_level: "no-auth-no-priv"
        source_ip: "84.230.14.43"
        source_ipv6: "<your_own_value>"
        status: "enable"
        trap_lport: "18"
        trap_rport: "19"
        trap_status: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_system_snmp_user_module.html

Docs

Docs4dev

Title here