junipernetworks.junos.junos_ntp_global – Manage NTP configuration on Junos devices.
Note
This plugin is part of the junipernetworks.junos collection (version 2.6.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_ntp_global.
New in version 2.6.0: of junipernetworks.junos
Synopsis
- This module manages NTP configuration on devices running Junos.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
- ncclient (>=v0.6.4)
- xmltodict (>=0.12.0)
Parameters
| Parameter | Choices/Defaults | Comments | ||
|---|---|---|---|---|
| config
dictionary
|
A dictionary of NTP configuration.
|
|||
| authentication_keys
list / elements=dictionary
|
NTP authentication key.
|
|||
| algorithm
string
|
|
Authentication key type.
|
||
| id
integer
|
Authentication key number.
|
|||
| key
string
|
Authentication key value.
|
|||
| boot_server
string
|
Server to query during boot sequence.
|
|||
| broadcast_client
boolean
|
|
Listen to broadcast NTP.
|
||
| broadcasts
list / elements=dictionary
|
Broadcast parameters.
|
|||
| address
string
|
Broadcast or multicast address to use.
|
|||
| key
string
|
Authentication key.
|
|||
| routing_instance_name
string
|
Routing intance name in which interface has address in broadcast subnet.
|
|||
| ttl
integer
|
TTL value to transmit.
|
|||
| version
integer
|
NTP version to use.
|
|||
| interval_range
integer
|
Set the minpoll and maxpoll interval range.
|
|||
| multicast_client
string
|
Listen to multicast NTP address.
|
|||
| peers
list / elements=dictionary
|
NTP Peers.
|
|||
| key_id
integer
|
Key-id to be used while communicating.
|
|||
| peer
string
|
Hostname/IP address of the NTP Peer.
|
|||
| prefer
boolean
|
|
Prefer this peer.
|
||
| version
integer
|
NTP version to use.
|
|||
| servers
list / elements=dictionary
|
NTP Servers.
|
|||
| key_id
integer
|
Key-id to be used while communicating.
|
|||
| prefer
boolean
|
|
Prefer this peer_serv.
|
||
| routing_instance
string
|
Routing instance through which server is reachable.
|
|||
| server
string
|
IP address or hostname of the server.
|
|||
| version
integer
|
NTP version to use.
|
|||
| source_addresses
list / elements=dictionary
|
Source-Address parameters.
|
|||
| routing_instance
string
|
Routing intance name in which source address is defined.
|
|||
| source_address
string
|
Use specified address as source address.
|
|||
| threshold
dictionary
|
Set the maximum threshold(sec) allowed for NTP adjustment.
|
|||
| action
string
|
|
Select actions for NTP abnormal adjustment.
|
||
| value
integer
|
The maximum value(sec) allowed for NTP adjustment.
|
|||
| trusted_keys
list / elements=dictionary
|
List of trusted authentication keys.
|
|||
| key_id
integer
|
Trusted-Key number.
|
|||
| running_config
string
|
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show system syslog.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
|
|||
| state
string
|
|
The state the configuration should be left in.
The states replaced and overridden have identical behaviour for this module.
Refer to examples for more details.
|
||
Notes
Note
- This module requires the netconf system service be enabled on the device being managed.
- This module works with connection
netconf. - See the Junos OS Platform Options.
- Tested against JunOS v18.4R1
Examples
# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
#
# [edit]
# vagrant@vsrx# show routing-instances
# rt1 {
# description rt1;
# }
# rt2 {
- name: Merge provided NTP configuration into running configuration.
junipernetworks.junos.junos_ntp_global:
config:
boot_server: '78.46.194.186'
broadcasts:
- address: '172.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt1'
- address: '192.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt2'
broadcast_client: true
interval_range: 2
multicast_client: "224.0.0.1"
peers:
- peer: "78.44.194.186"
- peer: "172.44.194.186"
key_id: 10000
prefer: true
version: 3
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
source_addresses:
- source_address: "172.45.194.186"
routing_instance: 'rt1'
- source_address: "171.45.194.186"
routing_instance: 'rt2'
threshold:
value: 300
action: "accept"
trusted_keys:
- key_id: 3000
- key_id: 2000
state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "before": {},
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp><nc:boot-server>78.46.194.186</nc:boot-server><nc:broadcast>"
# "<nc:name>172.16.255.255</nc:name><nc:key>50</nc:key><nc:routing-instance-name>rt1</nc:routing-instance-name>"
# "<nc:ttl>200</nc:ttl><nc:version>3</nc:version></nc:broadcast><nc:broadcast><nc:name>192.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt2</nc:routing-instance-name><nc:ttl>200</nc:ttl>"
# "<nc:version>3</nc:version></nc:broadcast><nc:broadcast-client/><nc:interval-range>2</nc:interval-range>"
# "<nc:multicast-client>224.0.0.1</nc:multicast-client><nc:peer><nc:name>78.44.194.186</nc:name></nc:peer>"
# "<nc:peer><nc:name>172.44.194.186</nc:name><nc:key>10000</nc:key><nc:prefer/><nc:version>3</nc:version>"
# "</nc:peer><nc:server><nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name><nc:key>34</nc:key>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:source-address><nc:name>172.45.194.186</nc:name>"
# "<nc:routing-instance>rt1</nc:routing-instance></nc:source-address><nc:source-address>"
# "<nc:name>171.45.194.186</nc:name><nc:routing-instance>rt2</nc:routing-instance></nc:source-address>"
# "<nc:threshold><nc:value>300</nc:value><nc:action>accept</nc:action></nc:threshold>"
# "<nc:trusted-key>3000</nc:trusted-key><nc:trusted-key>2000</nc:trusted-key></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
#
#
# Using Replaced
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Replaced running ntp global configuration with provided configuration
junipernetworks.junos.junos_ntp_global:
config:
authentication_keys:
- id: 2
algorithm: 'md5'
key: 'asdfghd'
- id: 5
algorithm: 'sha1'
key: 'aasdad'
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "before": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# "<nc:ntp delete="delete"/><nc:ntp><nc:authentication-key><nc:name>2</nc:name><nc:type>md5</nc:type>
# "<nc:value>asdfghd</nc:value></nc:authentication-key><nc:authentication-key><nc:name>5</nc:name>
# "<nc:type>sha1</nc:type><nc:value>aasdad</nc:value></nc:authentication-key><nc:server>
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Override running ntp global configuration with provided configuration
junipernetworks.junos.junos_ntp_global:
config:
authentication_keys:
- id: 2
algorithm: 'md5'
key: 'asdfghd'
- id: 5
algorithm: 'sha1'
key: 'aasdad'
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "before": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# "<nc:ntp delete="delete"/><nc:ntp><nc:authentication-key><nc:name>2</nc:name><nc:type>md5</nc:type>
# "<nc:value>asdfghd</nc:value></nc:authentication-key><nc:authentication-key><nc:name>5</nc:name>
# "<nc:type>sha1</nc:type><nc:value>aasdad</nc:value></nc:authentication-key><nc:server>
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server></nc:ntp></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# authentication-key 2 type md5 value "$9$03aAB1hreW7NbO1rvMLVbgoJ"; ## SECRET-DATA
# authentication-key 5 type sha1 value "$9$DXiHmf5F/A0ZUjq.P3n"; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
#
- name: Delete running NTP global configuration
junipernetworks.junos.junos_ntp_global:
config:
state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {},
# "before": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$03aAB1hreW7NbO1rvMLVbgoJ"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$DXiHmf5F/A0ZUjq.P3n"
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ]
# },
# "changed": true,
# "commands": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp delete="delete"/></nc:system>"
# ]
# After state
# -----------
#
# vagrant@vsrx# show system ntp
#
# [edit]
# Using gathered
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# boot-server 78.46.194.186;
# interval-range 2;
# peer 78.44.194.186;
# peer 172.44.194.186 key 10000 version 3 prefer; ## SECRET-DATA
# server 48.46.194.186 key 34 version 2 prefer routing-instance rt1; ## SECRET-DATA
# server 48.45.194.186 key 34 version 2 prefer; ## SECRET-DATA
# broadcast 172.16.255.255 routing-instance-name rt1 key 50 version 3 ttl 200;
# broadcast 192.16.255.255 routing-instance-name rt2 key 50 version 3 ttl 200;
# broadcast-client;
# multicast-client 224.0.0.1;
# trusted-key [ 3000 2000 ];
# threshold 300 action accept;
# source-address 172.45.194.186 routing-instance rt1;
# source-address 171.45.194.186 routing-instance rt2;
- name: Gather running NTP global configuration
junipernetworks.junos.junos_ntp_global:
state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
# "gathered": {
# "boot_server": "78.46.194.186",
# "broadcast_client": true,
# "broadcasts": [
# {
# "address": "172.16.255.255",
# "key": "50",
# "routing_instance_name": "rt1",
# "ttl": 200,
# "version": 3
# },
# {
# "address": "192.16.255.255",
# "key": "50",
# "routing_instance_name": "rt2",
# "ttl": 200,
# "version": 3
# }
# ],
# "interval_range": 2,
# "multicast_client": "224.0.0.1",
# "peers": [
# {
# "peer": "78.44.194.186"
# },
# {
# "key_id": 10000,
# "peer": "172.44.194.186",
# "prefer": true,
# "version": 3
# }
# ],
# "servers": [
# {
# "key_id": 34,
# "prefer": true,
# "routing_instance": "rt1",
# "server": "48.46.194.186",
# "version": 2
# },
# {
# "key_id": 34,
# "prefer": true,
# "server": "48.45.194.186",
# "version": 2
# }
# ],
# "source_addresses": [
# {
# "routing_instance": "rt1",
# "source_address": "172.45.194.186"
# },
# {
# "routing_instance": "rt2",
# "source_address": "171.45.194.186"
# }
# ],
# "threshold": {
# "action": "accept",
# "value": 300
# },
# "trusted_keys": [
# {"key_id": 2000},
# {"key_id": 3000}
# ]
# },
# "changed": false,
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
junipernetworks.junos.junos_ntp_global:
config:
boot_server: '78.46.194.186'
broadcasts:
- address: '172.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt1'
- address: '192.16.255.255'
key: '50'
ttl: 200
version: 3
routing_instance_name: 'rt2'
broadcast_client: true
interval_range: 2
multicast_client: "224.0.0.1"
peers:
- peer: "78.44.194.186"
- peer: "172.44.194.186"
key_id: 10000
prefer: true
version: 3
servers:
- server: "48.46.194.186"
key_id: 34
prefer: true
version: 2
routing_instance: 'rt1'
- server: "48.45.194.186"
key_id: 34
prefer: true
version: 2
source_addresses:
- source_address: "172.45.194.186"
routing_instance: 'rt1'
- source_address: "171.45.194.186"
routing_instance: 'rt2'
threshold:
value: 300
action: "accept"
trusted_keys:
- 3000
- 2000
state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
# "rendered": [
# "<nc:system xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
# "<nc:ntp><nc:boot-server>78.46.194.186</nc:boot-server><nc:broadcast><nc:name>172.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt1</nc:routing-instance-name><nc:ttl>200</nc:ttl>"
# "<nc:version>3</nc:version></nc:broadcast><nc:broadcast><nc:name>192.16.255.255</nc:name>"
# "<nc:key>50</nc:key><nc:routing-instance-name>rt2</nc:routing-instance-name>"
# "<nc:ttl>200</nc:ttl><nc:version>3</nc:version></nc:broadcast><nc:broadcast-client/>"
# "<nc:interval-range>2</nc:interval-range><nc:multicast-client>224.0.0.1</nc:multicast-client><nc:peer>"
# "<nc:name>78.44.194.186</nc:name></nc:peer><nc:peer><nc:name>172.44.194.186</nc:name>"
# "<nc:key>10000</nc:key><nc:prefer/><nc:version>3</nc:version></nc:peer><nc:server>"
# "<nc:name>48.46.194.186</nc:name><nc:key>34</nc:key><nc:routing-instance>rt1</nc:routing-instance>"
# "<nc:prefer/><nc:version>2</nc:version></nc:server><nc:server><nc:name>48.45.194.186</nc:name>"
# "<nc:key>34</nc:key><nc:prefer/><nc:version>2</nc:version></nc:server><nc:source-address>"
# "<nc:name>172.45.194.186</nc:name><nc:routing-instance>rt1</nc:routing-instance></nc:source-address>"
# "<nc:source-address><nc:name>171.45.194.186</nc:name><nc:routing-instance>rt2</nc:routing-instance>"
# "</nc:source-address><nc:threshold><nc:value>300</nc:value><nc:action>accept</nc:action></nc:threshold>"
# "<nc:trusted-key>3000</nc:trusted-key><nc:trusted-key>2000</nc:trusted-key></nc:ntp></nc:system>"
# ]
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <version>18.4R1-S2.4</version>
# <system xmlns="http://yang.juniper.net/junos-es/conf/system">
# <ntp>
# <authentication-key>
# <name>2</name>
# <type>md5</type>
# <value>$9$GxDjqfT3CA0UjfzF6u0RhS</value>
# </authentication-key>
# <authentication-key>
# <name>5</name>
# <type>sha1</type>
# <value>$9$ZsUDk.mT3/toJGiHqQz</value>
# </authentication-key>
# </ntp>
# </system>
# </configuration>
# </rpc-reply>
#
- name: Parse NTP global running config
junipernetworks.junos.junos_ntp_global:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": {
# "authentication_keys": [
# {
# "algorithm": "md5",
# "id": 2,
# "key": "$9$GxDjqfT3CA0UjfzF6u0RhS"
# },
# {
# "algorithm": "sha1",
# "id": 5,
# "key": "$9$ZsUDk.mT3/toJGiHqQz"
# }
# ]
# }
#
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after
dictionary
|
when changed |
The resulting configuration model invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| before
dictionary
|
always |
The configuration prior to the model invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| commands
list / elements=string
|
always |
The set of commands pushed to the remote device.
Sample:
['<nc:name>78.44.194.186</nc:name></nc:peer><nc:peer><nc:name>172.44.194.186</nc:name>', 'xml 2', 'xml 3']
|
Authors
- Rohit Thakur (@rohitthakur2590)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_ntp_global_module.html