junipernetworks.junos.junos_vlans – VLANs resource module

Note

This plugin is part of the junipernetworks.junos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_vlans.

New in version 1.0.0: of junipernetworks.junos

Synopsis

This module creates and manages VLAN configurations on Junos OS.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)

Parameters

Parameter		Choices/Defaults	Comments
config list / elements=dictionary			A dictionary of Vlan options
	description string		Text description of VLANs
	l3_interface string		Name of logical layer 3 interface.
	name string / required		Name of VLAN.
	vlan_id integer		IEEE 802.1q VLAN identifier for VLAN (1..4094).
running_config string			This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show vlans. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state string		Choices: merged ← replaced overridden deleted gathered parsed rendered	The state of the configuration after module completion.

Notes

Note

This module requires the netconf system service be enabled on the remote device being managed
Tested against Junos OS 18.4R1
This module works with connection netconf.
See the Junos OS Platform Options.

Examples

# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
#
# [edit]

- name: Merge provided Junos vlans config with running-config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 1
    - name: vlan2
      vlan_id: 2
      l3_interface: irb.12
    state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "before": [],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id></nc:vlan>"
#         "<nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id><nc:l3-interface>irb.12</nc:l3-interface>"
#         "</nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 1;
# }
# vlan2 {
#     vlan-id 2;
#     l3-interface irb.12;
# }

# Using replaced
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 1;
# }
# vlan2 {
#     vlan-id 2;
#     l3-interface irb.12;
# }

- name: Replace Junos vlans running-config with the provided config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 11
      l3_interface: irb.10

    - name: vlan2
      vlan_id: 2
    state: replaced
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "before": [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan delete="delete"><nc:name>vlan1</nc:name></nc:vlan>"
#         "<nc:vlan delete="delete"><nc:name>vlan2</nc:name></nc:vlan>"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>11</nc:vlan-id>"
#         "<nc:l3-interface>irb.10</nc:l3-interface></nc:vlan><nc:vlan>"
#         "<nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }
#
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }
- name: Override Junos running-config with provided config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan3
      vlan_id: 3
      l3_interface: irb.13
    state: overridden
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "l3_interface": "irb.13",
#             "name": "vlan3",
#             "vlan_id": 3
#         }
#     ],
#     "before": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan delete="delete"><nc:name>vlan1</nc:name></nc:vlan><nc:vlan delete="delete">"
#         "<nc:name>vlan2</nc:name></nc:vlan><nc:vlan><nc:name>vlan3</nc:name><nc:vlan-id>3</nc:vlan-id>"
#         "<nc:l3-interface>irb.13</nc:l3-interface></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan3 {
#     vlan-id 3;
#     l3-interface irb.13;
# }
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan3 {
#     vlan-id 3;
#     l3-interface irb.13;
# }
- name: Delete specific vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan3
    state: deleted
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#         "<nc:vlan delete="delete"><nc:name>vlan3</nc:name></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }


- name: Gather running vlans configuration
  junipernetworks.junos.junos_vlans:
    state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "gathered": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": false,
#
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 1

    - name: vlan2
      vlan_id: 2
      l3_interface: irb.12
    state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "rendered": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id></nc:vlan>"
#         "<nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id><nc:l3-interface>irb.12</nc:l3-interface>"
#         "</nc:vlan></nc:vlans>"
#     ]
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <vlans>
#           <vlan>
#             <name>vlan1</name>
#             <vlan-id>1</vlan-id>
#           </vlan>
#           <vlan>
#             <name>vlan2</name>
#             <vlan-id>2</vlan-id>
#             <l3-interface>irb.12</l3-interface>
#           </vlan>
#        </vlans>
#     </configuration>
# </rpc-reply>

- name: Parse routing instance running config
  junipernetworks.junos.junos_vlans:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ]
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after list / elements=string	when changed	The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above.
before list / elements=string	always	The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id> </nc:vlan><nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id> <nc:l3-interface>irb.12</nc:l3-interface></nc:vlan></nc:vlans>', 'xml 2', 'xml 3']

Authors

Daniel Mellado (@dmellado)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_vlans_module.html

Docs

Docs4dev

Title here

junipernetworks.junos.junos_vlans – VLANs resource module

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors